Bambu Reusable filament spool (1KG refill)
Print Profile(4)
Description
Reusable spool for the 1kg Bambu Lab refill. Printed and tested, works fine in the AMS. Easy to put together with threads!
Printed with support, so the slot for the labels comes out good. Both holes and clips for securing the filament on the inside of the spool!
There is now two designs to choose between, either hexagon or octagon design! Outer diameter of the spool is 82 mm.
The labels are snap in place, so you know exactly which type of filament you have on the spool. You can easily snap the labels out with you finger from the back side. One label is blank, if you want to use a marker. Let me know if there is any other labels you need to have made.
USE: Insert the refill onto the spool holder, with internal threads. There is a small notch i the cardboard that fits into the small square on the spool holder. Screw the other side in, but dont tighten it yet. Remove the paper strips that holdes the refill together, then tighten the spools together with hand force.
If the spool is used with a filament dryer please use ABS or ASA filament. They will not deform by the heat.
I have printed mine in ABS filament.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)