Bambu Lab A1 Squash ball Feet
Copyright Claim
Bambu Lab A1 Squash ball Feet
Boost
19
34
10
Print Profile(1)
0.16mm layer, 2 walls, 25% infill
Designer
2.6 h
1 plate
Open in Bambu Studio
Boost
19
34
10
0
61
44
Released
Description
These squashballfeets for the BambuLab A1 allows you to reduce the noise of your printer by dampening out vibrations.
Print Settings
Printer: BambuLab A1
Rafts: No
Supports: Yes (The Dome for the Ball don't need Supports)
Resolution: 0.16
Infill: 25% Quibic plus 100% at the both sticks
Filament brand: esun
Filament color: black
Filament material: PETG
Additional material:
4x Squasball with two yellow dots
Assembly
Put the squasballs in the feets
optional put some doublsided tape in the nut
Remove the original feet (sorry for them)
see the last picture which foot goes at which position
Recalibrate the printer after installation
Comment & Rating (10)
All
Print Profile
0.16mm layer, 2 walls, 25% infill
Feet make the A1 print quality go down hill, even after a re-calibration.
1
Reply
wouldnt tpu be better to use ? :)
The designer has replied
0
Reply
you have to put a squashball in to the feet. the feet should be stable..
1
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
printed and fitted well, but the A1 printer was wobbling like jelly which I did not like, so I removed them.
0
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
amazing!
0
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
Druckprofil super nur leider ist die Funktion nicht wirklich brauchbar wackelt zu viel.
0
Reply
Absolutly amazing!
0
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 25% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld