Ryobi One+ Tool Holder HSW
Print Profile(2)
Description
A single print that allows you to hang any Ryobi One + powertool onto your Honeycomb Storage Wall! I've tested this with the glue gun, dremel tool, hot air gun and soldering iron (see pictures). The honeycomb wall connectors are built into the model and it requires no external hardware.
The print consists of a base plate and 2 supporting arms. The base plate has holes at the bottom for the supporting arms to snap into, allowing you to orient the tool in 1 of 3 ways:
| NOTE: While I wasn't able to test with one, drills are generally a bit heavier and should probably use the 2 arm configuration when mounting to your HSW. | |
| Use a single arm and orient the tool facing away from the storage wall. |  |
| Use both arms and orient the tool to face to the right |  |
| Use both arms and orient the tool to face to the left |  |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)