AMS Stacking System [HEX WALLS] Remixed by Jaxel

Remixed by

Jaxel

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 5% infill

Designer

23.1 h

2 plates

4.9(23)

Open in Bambu Studio

Boost

127

432

169

Released

Description

I just released my AMS Stacking System, and people on the MakerWorld Discord said I could make it even more modular by adding hexagon walls… So that's what I did!

Keep note that I have not printed these, so I don't actually know how they will turn out. The original honeycomb storage wall was designed to be printed flat on your print bed, not vertically… so I'm not actually sure how this will effect dimensional accuracy. But either way, this is a proof of concept!

You can find other models I have released for the X1C/AMS here:

https://makerworld.com/en/u/2811301167/collections/109412

If you appreciate my models, please consider buying me a coffee!

Comment & Rating (37)

@Addamas

Print Profile

0.2mm layer, 3 walls, 5% infill

Zero issues with model or profile, just my filament settings were wrong so layers are affected. Can connect honeycomb items or parts together using original connectors, printed on normal - 100% speed with PLA with added glue on texture bed (safety is number one priority for such long prints :D)

The designer has replied

@ultrajaxel

Thank you for confirming it works! Like I said in the description, I had no idea about whether or not the dimensional accuracy would be retained when printing vertically.

(Edited)

@PrintMason23

did you use supports?

@Addamas

Replying to @PrintMason23 :

Zero supports were present on it if I remember well - printed from MakerWorld

@Alaska.saedel

Print Profile

0.2mm layer, 3 walls, 5% infill

It looks good and works. Thank you for this variation of the original design!

@PrintMason23

is supports needed on this?

@Alaska.saedel

Replying to @PrintMason23 :

Yes, but only a very little amount (1%)

(Edited)

@printmaject1969

Print Profile

0.2mm layer, 3 walls, 5% infill

Love the hex hole design, printed all in PETG with deco plate and they turned out awesome! Thanks for the file!

@neotron

Print Profile

0.2mm layer, 3 walls, 5% infill

This printed very well and had some defects. None of the defects made it not functional. I do think its a bit loose but I also dont want to glue it together.

@NokedLee

Print Profile

0.2mm layer, 3 walls, 5% infill

better design than the original (blue), does not warp or break like that one, thx.

@fidodido

Boosted

Print Profile

0.2mm layer, 3 walls, 5% infill

The file prints fine with Alt Tab PLA black, eSun ABS+ white and LanBo ABS red! Printed 1st set with full support, wasted a lot of filaments and taking support off took quite a while. Printed 2nd and 3rd sets with printbed only support, fast removing support and can be used. Showing only the print profile and picture for 3rd set.

@lw915

First and foremost, the 3D design of this model is impeccably crafted, featuring smooth lines and a sturdy structure that aligns perfectly with my project needs. During the printing process, I discovered that the compatibility of the model file and the clarity of the provided instructions vastly simplified my preparatory tasks, enabling even a 3D printing enthusiast like myself to get started effortlessly. The assembly of the finished product was seamless, with an exceptional fit between each part, which not only saved me a substantial amount of adjustment time but also guaranteed the stability and visual appeal of the final product. Of particular note, the stacking functionality of the system greatly enhanced my space efficiency and allowed for numerous expansion options, thereby rendering my workstation more organized and orderly. Moreover, the surface finish of the printed item is astonishingly flawless, necessitating barely any further post-processing. This level of perfection instills great confidence in me regarding the designers on the MakerWorld platform and fosters eager anticipation for my future printing endeavors.