That's it yes. Two options, open it up in another session and copy the settings or simply open it up and import the model you want to print. It will ask you if you want to keep the changes or discard, you keep them, then the settings remaind and the model will be imported. 

Genau richtig. Zwei Optionen. Entweder öffnest du eine zweite session und kopierst die Einstellungen, oder du importierst das model in dieses Profil. Es wird eine Frage kommen ob due die Einstellungen kopieren möchtest oder nicht, du kopierst du dann, sodass die Support Einstellungen bleiben. 

That's correct. Two options: either open a new session and copy the settings, or simply import the model into this profile. You will be prompted to either keep or discard the settings; choose to keep them so the support settings remain.

user_819771961

Jürgen

was mache ich jetzt damit genau? bin noch neuling in der Materie 3D Druck? kann ich das irgendwie abspeichern? wenn ich mal stützen brauche in meinem Model?


What exactly do I do with this now? I'm still new to 3D printing. Can I somehow save this, for example, if I need supports in my model?

cover

2025-01-31 20.10.06.jpg

2025-01-31 20.10.25.jpg

2025-01-31_a1d153d59177d.jpg

plate_1.png

Default 0.2mm profile but the support settings have been changed to be as optimized as possible (for me anyway).  Test model is just that - a test. It has a very low infill so it breaks very easily - but the support of course comes off very easily.

0.2mm layer, 2 walls, 15% infill

Every now and then models require tree support yet they are sometimes still hard to remove so I sat down and played with the settings until they got off very easily. Feel free to print the test model but it is very weak (1% infill)

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models

Wrench Support

Flower support

RC Airplane supports

Support Mural for Dual MAKITA DC18RD Charger

Optimized Tree Support