CR-Scan Otter - TPU Lens Cover for Bumper Case
Print Profile(1)
Description
This is a protective TPU Lens Cover for the "CR-Scan Otter - TPU Bumper Case".
It is made to be printed in a TPU 90-95 Shore A hardness.
The filament used in the pictures is Polymaker PolyFlex TPU95 Orange.
Please note that if printing this item, make sure the TPU is properly dried,
and use a build plate that you are familiar with when using TPU.
Bambu Textured PEI Plate does give a great texture to the case, but it's _VERY_ difficult to remove, you need to heat the bed to 80-85C after print has finished, and then pull hard but carefully to remove it from the buildplate. Do this at your own risk!
Boost Me (for free)
A lot of filament is used for all the iterations of design and prototyping of these parts.
If you find the item helpful, please consider sending a boost as it helps to cover some of the development cost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)