BambuLab internal waste cleaner 315mm remix for X1
Copyright Claim
BambuLab internal waste cleaner 315mm remix for X1
Boost
28
70
29
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
56 min
1 plate
Open in Bambu Studio
Boost
28
70
29
0
162
102
Released
Description
This is a remix, a little bit larger to use the whole internal width (315mm) and also a little bit deeper of my Bambulab waste cleaner. It use the max of our Bambulab print space.
Comment & Rating (29)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
passt gut, Danke für die Vorlage
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Works well and fits well in the P1S printed with Bambu Labs Black PETG, the ramp portion came out a little bumpy I'm not sure why but most likely error on my end/filament. Otherwise this makes cleaning easier, thanks for the model!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Used .6mm nozzle. Prints nice and clean. Be sure to clean your bed as it takes up the full size of the bed diagonally. Brims are also recommended.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Passt hervorragend, Abfall mit einem Pinsel auf die Schiene gekehrt, Schiene entnommen und entleert, sauber.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printed in PLA+ and worked fine. Not flush fit but gets the job done.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
great work
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Really great idea but I find most of the bits get swept underneath it
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
Hi. Can you tell me the problem, please? Why only 3 stars ? Thanks
0
Reply
Replying to @JeanJean3d
Hello sorry about the rating probably my bad but my version didn't fit well. It seems like it was broke at the wrong angel and does not lay flat on the floor for me. Thank you for effort I loved the idea it just didn't work for me. Thank you for your hard work and your time.
(Edited)1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
1
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld