Frozen Elsa Hueforge by Spy Heart

Spy Heart

Art>2D Art

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

Designer

4.1 h

1 plate

4.7(20)

200 x 200 0.08mm layer, 2 walls, 100% infill

4.3 h

1 plate

4.8(5)

Open in Bambu Studio

Boost

105

174

221

149

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm

Swap Instructions:
Start with Black
At layer #4 (0.64mm) swap to Blue
At layer #11 (1.2mm) swap to Ice Blue
At layer #19 (1.84mm) swap to White for the rest.

Comment & Rating (34)

@jo3dimensions

had to add a modifier layer on the bottom to clean up the first layers, but otherwise great print. used bambu blue glow for the ice blue

(Edited)

@sam_lapointe

what did you do to modify the bottom layer ?

@jo3dimensions

I added a modifier layer that was .2mm thick and solid infill, it added a buffer between the bed and the outline for the shapes, right click on the model and add the modifier then reshape it to match the print

@tripleoe

Print Profile

0.08mm layer, 2 walls, 100% infill

I used a red blue mix instead of the dark blue and am pretty happy with the result.

@womacka

Print Profile

0.08mm layer, 2 walls, 100% infill

very nice

@paulpitine

Print Profile

0.08mm layer, 2 walls, 100% infill

Amazing! Thank you.

@EinzelFall

Print Profile

0.08mm layer, 2 walls, 100% infill

the background is only 0.4 mm and with 0.4 mm layer hight wich didn't look good at all. so I changed the first layer to 0.2 and added a part modifyer in the slicer so the black background is 1mm thick. this looks way better and isn't so flimsy, but otherwise nice. I used glow in the dark for light blue as well but the glow in the dark is so minor that I would say this is wasted.

(Edited)

@poohbear090673

Print Profile

0.08mm layer, 2 walls, 100% infill

came out awesome!

@stevo19842005

Print Profile

0.08mm layer, 2 walls, 100% infill

to dark of dark blue but good print

@seb58

Print Profile

200 x 200 0.08mm layer, 2 walls, 100% infill

@KillaPrintzilla

Print Profile

0.08mm layer, 2 walls, 100% infill

Strength Issue:flimsy

Other Issues:not a good finish on any top surfaces.

@Chrisfrisbie

Print Profile

200 x 200 0.08mm layer, 2 walls, 100% infill

(Edited)

The designer has replied

@dohara1985

Should not be at 100% infill. Infact it is very solid and heavy. check your settings.

@Chrisfrisbie

Replying to @dohara1985 :

it only printed 1 layer of black. I didn’t change any settings it was set to the upload you have

@dohara1985

Replying to @Chrisfrisbie :

I appreciate you responding, You are correct the black part is thin, But the entire thing is not. I understand your issue but it is normal practice. It is that way in most hueforges in order to cut down on filament. The thinner models are also easier to frame. Your issue is with the model and has nothing to do with my print profile. I did not upload the model, only the profile. If the profile worked, which it should have unless you stopped it, I would appreciate it if you fixed the rating.