PLA Temperature Tower (temp tower) G Code Remixed by 3dprintnow

Remixed by

3dprintnow

3D Printer>Test Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

29 min

1 plate

4.5(26)

Open in Bambu Studio

Boost

491

352

Released

Description

EASY PROCESS

You MUST INSERT THE G CODE:

Select the edit button to the right of your printer model to bring up printer settings.

2. Select the “Machine G-code” tab

3. Scroll down to “Layer change G-code.” Now copy and paste this code above the current G-code (DO NOT REMOVE the current G-code, simply copy and paste it above.

{if layer_num==0} M104 S190{endif};

{if layer_num==28} M104 S195{endif};

{if layer_num==53} M104 S200{endif};

{if layer_num==78} M104 S205{endif};

{if layer_num==103} M104 S210{endif};

{if layer_num==128} M104 S215{endif};

{if layer_num==153} M104 S220{endif};

{if layer_num==178} M104 S225{endif};

{if layer_num==203} M104 S230{endif};

YOU ARE DONE :) You can slice the file, and select Temperature colour scheme to check if it worked and you will see a rainbow coloured model with different colours for each of the layers

Comment & Rating (33)

@Heisenberg_Carb

Hey dude, thanks for the model. I had to scale it up to be worth to my use, but it works and I've learned some gcode. When you scale the thing up 160% you notice there's an error in the drawing of the model. I hade to carefully stare at it from few angles for 20 minutes, but i found it. I noticed it because of the flow difference noticeable from other steps at that point. See picture. There's a band which is more slow, less flow, more purple, than the same part on the steps above and under it. I thought of the numbers, but they're not, it happenz below the number sign. It's that little step on the rear side, in the picture. It's drawn on the object below instead than its own which lacks it. No real issue, just a thing to know when evaluating the surfaces on the print, which's why I scaled it up.

@milesoc

if you use {if layer_num%227=... in your gcode instead of just layer_num, you can use Print By Object to print three towers using three different filaments in the same job, as long as you're testing the same temps for each filament. Autoarrange will figure out the layout for you!

@Zackmo

Can you post the exact G-code -because that change wasnt working. Is this supposed to go in the "Printing by object G-code" field? Or just in the "layer change G-code" ? I'm not familiar with coding, but I tried many different permutations of your % suggestion. Thanks! I just kept getting error message from Bambu when attempting the Slice Plate function, but yes, it would be great to have ability to print multiple filament tests on one plate.

@DaManu87

Print Profile

0.2mm layer, 2 walls, 15% infill

Maybe I don't get it but is it needed to turn the heat up manually every Tim a floor is finished? Isn't there a way to write this in g-code? I'm just starting out so ist's probably my fault, but it won't work in my case if it should change the temp. automatically.

@Heisenberg_Carb

Print Profile

0.2mm layer, 2 walls, 15% infill

Useful, it requires some knowledge to be set up but it all turns handy

@martin.smolak

Print Profile

0.2mm layer, 2 walls, 15% infill

great print profile

@Danikara

super easy to follow directions, especially to a use of all of 3 days!! Appreciate it!

@lasse.rinstrom

Print Profile

0.2mm layer, 2 walls, 15% infill

Works as intended.

@RetroGears

Print Profile

0.2mm layer, 2 walls, 15% infill

printed well. only strange thing is... that i have no stirnging on that print but on all my other parts stringing as hell :D

@ziller99

Print Profile

0.2mm layer, 2 walls, 15% infill

10/10 would get hot for this again!

@jingram67923

Print Profile

0.2mm layer, 2 walls, 15% infill

This model printed well. The instructions were clear and easy to follow.

This remix is based on

All in One Temperature & Bridging Tower - PLA & PETG GCode included

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.