Clownskull

cover

Images_001.jpg

Images_004.jpg

Images_003.jpg

Images_002.jpg

plate_1.png

2025-01-19_5fc37fa5cd853.jpg

<ul><li>0.16mm layer height</li><li>Outer/inner order of walls</li><li>3 wall loops</li><li>10% infill</li><li>No supports needed</li></ul>

0.16mm layer, 3 walls, 10% infill

ChicoQuente

IMG_0966.jpeg

IMG_0967.jpeg

This is a slight modification of the original design to have 1 side a little more closed off. This makes it tougher to get on, however the benefit is that it will stay on your bag much easier. I found the original fell off too easily but this has solved that for me. Hopefully it is helpful to others as well.

0.2mm layer, 6 walls, 25% infill

Took inspiration from <a target="_blank" href="https://makerworld.com/en/models/640413#profileId-566281" rel="nofollow noopener ugc">this model</a>, but wanted something that could clip all 4 strings of the drawstring bag. So, I built the following from scratch, to match those needs.&nbsp;This is a pretty easy print, which doesn&#39;t require any supports, while having a nice balance of strength and flexibility to keep those pesky drawstrings in their place!&nbsp;The model shown was printed with Bambu PLA Matte Dark Blue

Drawstring Clip

ASIA

Print Profile(2)

Description

Comment & Rating (6)

License

Related Models