A picture I took of a far away mountain range and a lake lost to time print settings will be below
Hope you enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #11 (0.96mm) swap to Ivory White for the rest.