Pretty cool model! Sadly it came out weird but it’s my printer (A1) not the model itself. Can anyone give me advice on how to make these weird surface patterns disappear? They seem to be almost but not completely symmetrical, I don’t know if it’s related to vibrations or some configuration. Thanks!

Wonderful print Some supports are kinda tricky to reach but not an issue if you have a hair tweezer, that still doesn’t take away from how cool this is Will boost this once I have boosts again 😄

This is the longest print I’ve done. It was a PITA to glue together, some parts don’t fit precisely, the very long pairs of orange things have to be glued very carefully together with minimal contact surface, there’s so many things that can be easily messed up when gluing together, but the overall design is so amazing I can’t give anything less than five stars! Thanks for making it

Only top quality copper here

Only the best quality copper

This is just what I needed as I just bought the Pixoo 64 a few days ago! I shrank the X axis a bit because my plate is having adhesion issues near the edges and this print takes almost the entire width of the A1 plate. If someone has an A1 mini the only thing they need to do is shrink the X axis (do not scale down all axes or the screen won't fit!), maybe having an A1 mini profile would be a good idea! Thanks for making this design

Beautiful model, I printed the 20cm tall version and also manually scaled it to print it in 7.5cm tall version Removing the internal supports on the small one is tricky, the holes on the sides are very small so I could only use the bottom hole to use a small screwdriver to break the supports to pieces and remove them slowly, also it looks like the small one generates more supports volume inside than the large one On the larger one it’s easier to break the supports as the holes on the sides are larger so one can put the small screwdriver through many angles to break the supports inside

My favorite inhabitant of the Lake of Rage The matte red one had a little warping in the base but besides that good, the silk red one came perfect all the way Thanks!

I can smell what Grogu is cooking

Super cool and smooth and sturdy

Pretty cool and pretty smooth, no need to break them in like the dual-colored version

I love it, I was lucky to have the perfect filaments for printing it, my only small annoyance is the small seam between the flat part of the ring (the one facing the plate when printing) and the curved part, also the flat part having a different texture (smooth when angled against plate, rough when facing plate) IDK if this texture could be solved with ironing settings Thank you so much!

At first it was too tight even despite my efforts to turn it a lot to try to get it a bit smoother, but then I read in the comments about printing the cage parts at 101% size and that extra space was all that was needed to get this to turn smoothly! Thanks

Cute

Cute

Yet another amazing fractal, boosting this one too! Love the weight, and the pattern in the bottom too (not going to glue it with another half), and as bonus put in the top the little recursive cube fractal, thanks