好久不见。

khrillian

The Bambu Lab X1 & X1 Carbon use a PTFE bowden tube to guide filament to the print head. There is a little bit of wiggle, which causes the tube coupler to dig into the tube over time. I was never very happy with the amount of play allowed and designed a small push on cap to add a bit of extra support to the tube end, so it will hopefully last much longer.Fusion 360 file is included if you wish to make changes such as adjust tube diameter and tolerance.Print in the material of your choice. You may get better results with smaller layer heights.I printed this using Bambu Matte PLA at 0.08mm layer height using the 0.4mm nozzle.It is made to fit quite tight around the tube, so you may require a small round file or drill bit to remove the seam inside the hole to get it to fit right.Pair it with a bowden clip for extra security: <a href="https://www.printables.com/model/179548-ultimaker-style-bowden-clip" rel="nofollow">https://www.printables.com/model/179548-ultimaker-style-bowden-clip</a>&nbsp;Update Oct 30The original design came loose during a print. More of the guide features were used to better lock the cap to the tube guide on the print head.Update Oct 31Added a chamfer to make it easier to insert the tube. Also added a very small cut in the side of the hole for the slicer to put the seam (should not need to file the seam any more).

Bambu X1 bowden tube reinforcement / strain relief

打印机配件

MikeGTP

Hello!&nbsp;I created this top mounted Tool/Parts Tray for my MB Micro Filament Spool Shelf System&nbsp;This tray is a direct add on. It fits right on top of the shelf and provides a large capacity to hold accessors such as dessicant containers, snips, deburring tool, silica beads and tons more!&nbsp;The original Filament spool shelf system can be downloaded at <a target="_blank" href="https://makerworld.com/en/models/126061#profileId-136209" rel="nofollow noopener">https://makerworld.com/en/models/126061#profileId-136209</a>&nbsp;UPDATE: Several People have requested washers. I have included 8 files. Four sizes of round washers from 2-5mm and the same for polygon shaped washers&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_e0f5465702d4e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_2dba023ad0e67.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_44273fc0c1f08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_8fc69a42bfc74.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_4d9f25d29a1c7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/406490/2024-01-09_44b2d3cd9c355.jpg"></figure>

Parts Tray Top Mount for MB Micro Filament Spool Shelf System

工具

DutchWorkX3D

check my FB page https://www.facebook.com/groups/bambu3d4all There is a lot of info and help there ;-)&nbsp;I designed v3 from scratch based on the v2 version.It now has more strength and more place for honeycomb / hex add-ons.I have added:<ul><li>Honeycomb / Hex Ledstrip holder</li><li>Honeycomb / Hex Build plate holder</li><li>Honeycomb / Hex Top glass holder</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/176841/2023-09-27_0064ddb96eb55.gif">I have added the 3mf file with the settings, of course you can adjust to your own settings.I get a lot of requests and I don't mind following up on them as it makes these projects more interesting, although it takes a lot of time I really don't mind spending my time but I would appreciate it if you join the club as club members can be assured I follow up on their requests.If you like you can join my Bambu3D4All FB page https://www.facebook.com/groups/bambu3d4all/

打印机配件

工具

玩具