ZK Industries

Rafał

<p>Pool beer holder, fits standard cans and bottles. Adjustable height.</p>

Pool Beer Holder

Deltaprints

Nordic Circular Vase

decor

JamesThePrinter

<p>&nbsp;</p><p>This woven organizer is part of my <i>Woven Series. </i>You can view all of my <i>Woven Series</i> models in <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/18924" rel="nofollow noopener">this collection</a>. I originally pictured this sitting on my desk, holding everything that didn't fit in the pencil holder. But as I designed it, I thought to use it for tools, sitting next to my printer or just to hold my spare Szechuan sauce! </p><p>The size of this model was very intentional. It was designed to fit on my Prusa Mini at a 45 degree angle. This size allows many more people to enjoy the organizer since it will fit on almost any bed size.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-22_rdrffeaj8ufu.png"></figure><p>For best results, print using a 0.2mm layer height. The majority of the print will be perimeters. Because of this, infill is not necessary.</p><p><strong>2 versions</strong></p><p>One with dividers and one without dividers</p><p>&nbsp;</p><p><a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a></p><p>&nbsp;</p><p><i>The filament used in the pictures above is polymaker PolyTerra Army Beige PLA</i></p>

Woven Desk Organizer

Megan 

Protofusion

<p>1930-1959 Pontiac Logo LED Light Box.  </p><p>&nbsp;</p><p>You will have to create holes where you want them for the LEDs.  </p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Please visit my website at </span><a target="_blank" href="https://makerworld.com/en/models/protofusion3d.com" rel="nofollow noopener"><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">protofusion3d.com</span></a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> to support my work and view other products.</span></p><p>&nbsp;</p><p><strong>I hope you enjoy!</strong></p>

1930-1956 Pontiac Logo LED Light Box

lightboxes

bambaxp

Phone holder

phone

saai

<p>Simple tool to keep your alabama rig/umbrella rig from snagging on stuff and rattling around, just slide your line through the slit and pull it over your rig.</p><p><br>Make sure your seam is set to the back of the model so it does not affect the gap of the slit.</p>

Umbrella/Alabama Rig Fishing Lure Holder

fishing

Dr.Mussy

<div><h1>Summary</h1><div><p>This is an G36 HD Folding Stock that fits the new MOD22x new P-rail endcap and is compatible with most P-rail stock adaptors out there, this is a HEAVY DUTY and comfortable design, more stocks coming very soon ;)</p><h3>As usual all building details will be in the make. If you are interested in other firearm parts and designs do join our group on Matrix: Gun_Cad_Ideas the coolest prop team ever</h3><p>!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.</p><p>!Don't forget to check out my other Cool designs and Follow my Weekly dose of KooKoo uploads</p></div><h1>Print Settings</h1><p class="detail-setting printer brand"><strong>Printer Brand: </strong>                         </p><div><p>Creality</p></div>                                    <pre><code>                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></code></pre><p></p>                                    <p class="detail-setting supports"><strong>Supports: </strong>                         </p><div><p>No</p></div>                                    <pre><code>                                            <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></code></pre><p></p>                                    <p class="detail-setting infill"><strong>Infill: </strong>                         </p><div><p>20%</p></div>                                    <pre><code>                <strong>Filament:</strong>                 <a href="http://www.amazon.com/s?url=search-alias&field-keywords=ANY+PC" target="_blank" rel="nofollow noopener">                    ANY PC                    </a>                BLACK/RED                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>6 WALLS/SHELLS</p></div></code></pre></div>

G36 HD Folding Stock

tufactoria3d

<p>This is my design of a Native American using the software HUEFORGE. Perfect for a gift or decor your room. This file is suitable for all printers (not only bambu). in case you don´t own a Bambu, just take care of the layers height in order to make de filament change.</p><p>Please print at 0.08 layer height. The file also includes the .amf with all the color changes but also here you have the note:</p><p>&nbsp;</p><p>Swap Instructions (Just in case you want to make the filament changes manual):</p><p><br>Start with Black (xyzfilaments)<br>At layer #5 (0.44mm) swap to Dark Gray (xyzfilaments)<br>At layer #9 (0.84mm) swap to Light Gray (xyzfilaments)<br>At layer #14 (1.24mm) swap to White (xyzfilaments) for the rest.</p>

Native American HUEFORGE

chiefs

ChopperOriginals

<p>Here is a set of Double V-Grip soft jaws I made. Great for holding round stock vertically or horizontally. I made a set for each vise I use daily. 2.5&#34; Yost, 3&#34; Yost, and a 4&#34; Morgan Chicago 40. They are sturdy and hold up well at least so far. As a knife maker, I often find myself looking for something to hold work without marring it.</p><p>&nbsp;</p><p>Each set has a recess for magnets. The 2.5&#34; and 3&#34; take 8x3 mm magnets and the 4&#34; takes 12x3&#34; magnets. All can be found at local craft or department stores as well as Amazon. I left the recessed areas a tight fit on purpose. I did not want to rely on glue. I heated the holes with a lighter and then pressed them in with my fingers. Finished pushing them immediately in the vise. Worked great!</p><p>&nbsp;</p><p>Be sure to check my other things. I have a smooth set and a textured set coming as well.</p><h4><strong>Print Settings</strong></h4><ul><li>Printer brand: Creality</li><li>Printer: Ender-3 V3 KE</li><li>Rafts: No</li><li>Supports: No</li><li>Resolution: .40</li><li>Infill: 85</li><li>Filament brand: Creality</li><li>Filament color: Black</li><li>Filament material: PLA</li><li>Notes:</li></ul><p>***Note the infill. I printed with 85% Gyroid infill and 4 walls. Took a little longer but they should hold up much longer this way.</p>

Soft Jaws - Double V Grip - 2.5", 3", and 4"

possible sales

agepbiz

<figure class="media"><oembed url="https://www.youtube.com/watch?v=6RgBXBwwXBg"></oembed></figure><p>&nbsp;</p><p>edit: 04.03.24 added accessories - canvas top (separate print, no support needed)</p><p>&nbsp;</p><p>Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version. I wanted to do a project where I used several tools and machines to tie it all together into one project</p><p>&nbsp;</p><p>The Jeep Kit Card:<br><a target="_blank" href="https://makerworld.com/en/models/223303#profileId-241285" rel="nofollow noopener">https://makerworld.com/en/models/223303</a><br>The Trailer:<br><a target="_blank" href="https://makerworld.com/en/models/428258#profileId-332362" rel="nofollow noopener">https://makerworld.com/en/models/428258</a></p><p>The Gun:</p><p><a target="_blank" href="https://makerworld.com/en/models/469311#profileId-378676" rel="nofollow noopener">https://makerworld.com/en/models/469311</a></p><p>&nbsp;</p><p>Subscribe or follow me on:<br>Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a><br>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a><br>Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a></p><p>&nbsp;</p><p>WARNING: CHOKING HAZARD - Small parts<br>Not for children under 3 yrs.</p><p>&nbsp;</p><p>Printsettings:<br>No support<br>No raft<br>0,16mm layer height</p>

Jeep Kit Card

kids toys

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

printer mods

duck.knapp

<p>I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...</p><p>&nbsp;</p><p>&nbsp;</p><p>so I developed my own press.</p><p><br>You can <strong>print everything</strong> except <strong>6x 608 zz</strong> ball bearings which you have to press in.</p><p>&nbsp;</p><p>&nbsp;</p><p>For assembly you need:<br>- First the 6 bearings are pressed in<br>- join your arms<br>- arms to the headpiece<br>- arms with headpiece to the base</p><p>&nbsp;</p><p>&nbsp;</p><p>It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose.<br>The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.</p><p>&nbsp;</p><p>It&#39;s not an easy print but I think it&#39;s cool XD</p><p>&nbsp;</p><p><strong>Material:</strong> PETG, ABS, Nylon or so</p><p>&nbsp;</p><p><strong>btw: In the pictures you can see the old arms, now they are different lengths</strong></p><p><strong>and as always if you think of something that I can change/improve, please let me know</strong></p>

Heat Set Insert Press (99% 3D-Printed)

tools

HpInvent

<p>Here is a super cute animal for you to print ;)<br><br>I sliced it a little smaller to take some time of the print.<br>Simply scale it to your liking, there is enough resolution in the sculpt;)</p><p>&nbsp;</p><p>Also check out my other Designs!</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">I have a bunch more stuff in my profile!!</span><br><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a></p><p>Also check out my other Designs!</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">I have a bunch more stuff in my profile!!</span><br><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a></p><p><a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-03-08_a8a626fc04c78.png"></a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-04-18_7588ba5642a27.png"></a></p><p><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-04-15_b1e75bac7bd51.png"></a></p><p><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-04-08_ebe2de8bae1b3.png"></a></p><p><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-03-06_ea517b7dbe741.png"></a></p><p><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447569/design/2024-03-27_3b061a50c97b7.png"></a><br><br> </p><p>&nbsp;</p><p>&nbsp;</p><p>Happy Printing!</p>

Cute happy Squirrel with Nut

funny stuff

SavageLau

<h3><strong>If you want commercial license, check out my bio and get it from Patreon. </strong></h3><p>&nbsp;</p><p>I made this design a while ago, this design have been use for year. I made new revision and upload here for kitchen contest, so it is MakerWorld exclusive at this point.</p><figure class="image image_resized" style="width:58.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/402666/2023-12-10_778d6561cc854.jpg"></figure><p>Make sure your cutting board thickness before printing it!!! It will only fit under 15.5mm to 14mm thickness. If the board is too thick, it won't fit. If board is too thin, it will leanning too much on the side and won't stand.</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/402666/2023-12-10_fdcb17a6d2179.png"></figure><p>If the thickness is right, it could hold very big cutting board as shown:</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/402666/2023-12-10_7aad9cd1475d4.jpg"></figure><p>The dimension is too large for a1mini, so I made another size for it.</p><p>&nbsp;</p>

mom