ziller99

phyXoo

Do you believe in freedom? Can you stand in the face of oppression – and defend the defenceless? Can you keep democracy away from these cretins? Wage war for peace. Die for democracy.&nbsp;Print this Stratagem Marker to liberate the galaxy! &nbsp;Printing the lock key is not mandatory. Personally I find it easier to glue it together without it.

Stratagem marker - Helldivers 2

Hell Divers

LoboCNC

Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be screwed into the previous section to form a rigid connection. You can also leave some sections un-extended for using with low-rider beach chairs.&nbsp;Sized for cans and bottles up to 75mm dia., and it also flares at the top for cups. It can be re-scaled in X and Y for larger diameter containers. Stands 570mm tall, with an additional 150mm  for the spike.

Collapsible Cup Holder Spike (print-in-place)

Outdoors

Meyerhouse

Presidential De-BAIT Cast your vote! A fishing lure that works!! Their is two profiles to download both are the same but one is a vote for Papa Trump and the other is for Sleepy Joe. See who will win!!!! You change the heads on these and change your lure to either or. Thread the fishing line through the head and on the split ring to set up the lure. Have fun showing off your lure and catches!! Don&#39;t buy expensive crankbait that you hate to use because you think you are going to get hung up on something throw 20 bucks in the lake. Print these and you don&#39;t have to worry. Color it any way you would like. I used nail polish but do it any way you would like.Need 9mm split rings and some # 6-8 treble hooksThe split rings actually measure out 9.4mm (.370&#34;) OD and 6.85mm (.269&#34;) ID at pauses add them in.Give it a rating if you can and have fun

Presidential De-BAIT  CAST your vote!

Fishing

Sektor 7 Studios

** UPDATES **<ul><li>12.06.2024 → New ergonomic knob has been added. Now it is also easy to transport, the button is very easy to grip and feels very good. (see pictures &amp; print profile)</li><li>21.06.2024 → New Gridfinity Baseplate for the Magnet Revolver has been added. Now you can use the Magnet Organizer for Gridfinity (see pictures &amp; print profile)</li><li>21.06.2024 → New 25mm Insert for the Magnet Revolver has been added.</li><li>22.06.2024 → New 2mm Insert in 2 Versions for the Magnet Revolver has been added.</li><li>22.06.2024 → Magnet Revolver Bearing Variant published as a Remix!<ul><li>YOU CAN DOWNLOAD THIS VARIANT HERE: <a target="_blank" href="https://makerworld.com/en/models/508059" rel="nofollow noopener">https://makerworld.com/en/models/508059</a></li></ul></li><li>28.06.2026 → Inlet for checking the magnet thickness was added as a remix (Thanks @<a target="_blank" href="https://makerworld.com/en/@lscottmunoz" rel="nofollow noopener">lscottmunoz</a>)<ul><li>YOU CAN DOWNLOAD THIS VARIANT HERE: <a target="_blank" href="https://makerworld.com/en/models/514926" rel="nofollow noopener">https://makerworld.com/en/models/514926</a></li></ul></li></ul>Hello everyone!&nbsp;I’m thrilled to introduce you to our innovative modular &#34;MAGNET REVOLVER&#34; in a unique revolver design. This creation is born from my need to efficiently store magnets of various sizes, something I struggled to find in existing solutions on MakerWorld. Taking matters into my own hands, I designed a storage system that is both practical and visually appealing.&nbsp;The design allows magnets to slightly protrude, enabling easy access—you can simply push up the desired magnets with one finger and retrieve them from the revolver.&nbsp;We have put together a short video of the assembly on our Instagram profile: <a target="_blank" href="https://www.instagram.com/p/C74mmSto2su/" rel="nofollow noopener">https://www.instagram.com/p/C74mmSto2su/</a>&nbsp;<h4>Key Benefits of the Magnetic Revolver Organizer:</h4><ul><li>Space-saving: Optimized design ensures minimal space usage.</li><li>Modular: Customizable with various sizes and inserts to suit your needs.</li><li>Bearing-free: No additional components required.</li><li>Dual-purpose Rotating Mechanism: Functions as a storage solution and a fidget toy—an accidental but delightful discovery.</li><li>Gridfinity System compatible</li></ul>&nbsp;OVERVIEW OF THE PRINT PROFILES FOR THE INSERTS<ul><li>INSERTS VARIATION 1:<ul><li>Diameter 4 (2 times), Diameter 6 (2 times), Diameter 8 (2 times), Diameter 10 (2 times), Diameter 12 (2 times), Diameter 15 (1 time), Diameter 17 (1 time), Diameter 18 (1 time)</li></ul></li><li>INSERTS VARIATION 2:<ul><li>Diameter 3 (2 times), Diameter 5 (2 times), Diameter 7 (2 times), Diameter 9 (2 times), Diameter 12 (2 times), Diameter 15 (1 time), Diameter 18 (1 time), Diameter 20 (1 time)</li></ul></li><li>INSERTS VARIATION 3:<ul><li>Diameter 3 (4 times), Diameter 4 (4 times), Diameter 5 (4 times), Diameter 6 (4 times), Diameter 7 (4 times), Diameter 8 (2 times), Diameter 9 (2 time), Diameter 10 (2 time)</li></ul></li><li>INSERTS VARIATION 4:<ul><li>Diameter 3 (2 times),  Diameter 4 (2 times), Diameter 5 (2 times), Diameter 6 (2 times), Diameter 7 (2 times), Diameter 8 (2 times), Diameter 9 (2 time), Diameter 10 (2 time)</li></ul></li></ul>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/508059" rel="nofollow noopener">NEW BIG RELEASE! MAGNET REVOLVER WITH 608 BEARING!</a><figure class="image image_resized" style="width: 34.81%"><a href="https://makerworld.com/en/models/508059" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485741/design/2024-06-23_47d0d3625963a8.png"></a></figure>&nbsp;Now you can use the Magnet Revolver for the Gridfinity System! (see Print Profiles &amp; STL-Files)&nbsp;<figure class="image image_resized" style="width: 35.23%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485741/design/2024-06-22_9ce78ea79d0f58.png"></figure>&nbsp;Follow us on MakerWorld and Patreon for more elegant and functional designs.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/488305" rel="nofollow noopener">ALSO TAKE A LOOK AT OUR SPINNING ORGANIZER, WHICH IS COMPATIBLE WITH THE LOWER PART OF THE SPINNING REVOLVER:</a>&nbsp;<figure class="image image_resized" style="width: 34.81%"><a href="https://makerworld.com/en/models/488305https://makerworld.com/en/models/488305" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485741/design/2024-06-08_335d98bfd219f8.png"></a></figure>&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Did you like the design? Then please give me a boost. Thank you very much :)</boostcontent></boostme>&nbsp;&nbsp;Support us on Patreon to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere:<a target="_blank" href="https://www.patreon.com/sektor7_studios" rel="nofollow noopener">https://www.patreon.com/sektor7_studios</a>  &nbsp;Greetings&nbsp;Leon from Sektor 7 Studios&nbsp;&nbsp;&nbsp;

Magnet Organizer / Dispenser / Revolver (modular)

House Items

Cincinnati Squirrel

**** Files updated to include better clearance for top loader********I updated files for printability. Originals used fillets near bed and the updated files use chamfers.****&nbsp;Simple and functional deck box with commander window. Specifically designed for EDH/Commander decks but can be used for any TCG. I never liked how much I had to squish my double sleeved commander decks; so, this is designed to hold 100+ double sleeved cards with ease. In practice it easily holds 100 double sleeved cards plus 10+ tokens or even the life counter that comes with precons.&nbsp;The lid is specially designed to hold 6 22mm D20 dice while playing commander! I use 3 D20 spindown counters to track my life and 3 D20 spindown counters to keep track of commander damage. The lid also has a lip which I use as my command zone. The dice do NOT store inside the box. The lid is a perfect command zone!&nbsp;The deck box has a top loader to hold your commander or any other card you choose. You will never forget what is in the deck box again. 4 magnets hold the lid shut. After you shuffle; you can just put the deck box on its back and use it as a card tray.&nbsp;This deck box uses eight 6 mmx 3 mm magnets and one 3 in x 4 in hard top loader.&nbsp;Magnets<a target="_blank" href="https://a.co/d/4IMZo2W" rel="nofollow noopener">https://a.co/d/4IMZo2W</a>&nbsp;Top Loader<a target="_blank" href="https://a.co/d/dgXykSV" rel="nofollow noopener">https://a.co/d/dgXykSV</a>&nbsp;I recommend using loctite gel control or gorilla glue clear for the magnets.&nbsp;Loctite Glue<a target="_blank" href="https://a.co/d/5Irv5LR" rel="nofollow noopener">https://a.co/d/5Irv5LR</a>&nbsp;Gorilla Glue<a target="_blank" href="https://a.co/d/hhCdhW1" rel="nofollow noopener">https://a.co/d/hhCdhW1</a>&nbsp;I find it prints best with the bottom of the deck box and the top of the lid on the build plate.&nbsp;If you would like a deck box and are unable to print yourself; it is available on my Etsy shop. Or just message me.&nbsp;<a target="_blank" href="https://cincinnatisquirrel.etsy.com/" rel="nofollow noopener">https://cincinnatisquirrel.etsy.com</a>

MTG Commander Display Deck Box Magic The Gathering

TS.Makers

It's ya boy the Slimelord Gumoss from PalWorld. I love this guy. Make your own guy. Probably no more Pals in the pipeline though relaxaurus is tempting.

Gumoss from PalWorld 

Palworld

3Dacores

An electrifying addition to illuminate the world of Pokémon enthusiasts! This charming lamp captures the essence of everyone's favorite Electric-type Pokémon, Pikachu, in a delightful and functional design.&nbsp;Crafted with meticulous attention to detail, the Pikachu LED Lamp features a vibrant, Pikachu-shaped silhouette that radiates a warm and comforting glow. Whether you're a seasoned Pokémon Trainer or just starting your journey, this lamp brings the iconic Pikachu to life in a unique and playful way. Whether placed on a bedside table, desk, or as a centerpiece in your Pokémon collection, this lamp adds a touch of whimsy to any space.&nbsp;The Pikachu LED Lamp is not just a source of light; it's a delightful expression of your love for the Pokémon world.&nbsp;Illuminate your surroundings with the cheerful spirit of Pikachu – a must-have for Pokémon fans of all ages. Let the Pikachu LED Lamp brighten up your space and infuse it with the playful energy of this beloved Electric-type Pokémon!&nbsp;<blockquote>Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship. All trademarks, logos and characters are the property of their respective owners. Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders. I respect the intellectual property of all brands and/or characters mentioned or used in this design. If you think this design infringes on the ownership rights of the trademark, please submit a copyright complaint, and this design will be removed immediately.</blockquote>

Pikachu sitting Lightbox | LED Lamp - Pokemon

Light Box's

ExtRuben

a 3D printed counter for tabletop games. counts from 0-99. Required:2x M3 x 12mm1x rollerpen spring

Counter / dnd counter

Pulp Comics

Fat Tony

<h2>V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C X1-E Riser+AMS Stand - Community Build!</h2>&nbsp;AMS Riser with ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.<ul><li>Rises AMS off machine</li><li>Allows visibility through top glass while printing</li><li>Allows access through top glass for servicing without disconnecting/removing entire AMS</li><li>Shelf allows top glass ventilation to prevent heat creep and clogging during PLA prints</li><li>Minimizes sharpness of PTFE bend radius's helping mitigate “failure to retract” errors</li><li>Stops the PTFE tube from rubbing on the top glass</li><li>Easy to add accessories such as lighting and hooks to hang your build plates</li></ul>&nbsp;03/26/2024: Due to being asked multiple times I have added a plate of just the connectors to the .3mf file. These are separated to reduce the risk of the smaller parts dislodging and ruining the larger prints. Feel free to add them to a plate(s) with the risers as they will fit if you wish.&nbsp;&nbsp;Additional accessories found under raw models. For all accessories and more details, see: https://www.printables.com/model/557492-v2-vented-remix-updated-bambu-lab-ultimate-p1p-p1s&nbsp;

V2 Ultimate Vented Riser P1P/S - X1C/E

Printer Mods

Bloxder

Blastoise jumping out of the blue edition gameCan be printed in one piece or top and bottom separately to make it easier to paint If you have any problems or suggestions for new projects, please feel free to write

Blastoise cartridge

pokemon

Secret Santa Gifts 2023

emilskibsted

I wanted to print a game of Ships Battle, but could not find any project files for it on MakerWorld, so thought I'd post it.&nbsp;*** Want another classic game? See my new travel chess game: <a target="_blank" href="https://makerworld.com/en/models/247953#profileId-264188" rel="nofollow noopener">Travel-Chess 2.0 Remixed by emilskibsted - MakerWorld</a> ***&nbsp;Changes: - Resized everything, so it all fits together perfectly on my P1S. - Added some colors where I thought it would be nice. - Added a tweezer for easy pin pickup when lost in the sea :) - Made various settings regarding infill, ironing etc. which worked the best for me.&nbsp;Complete printing time: 21H 5m&nbsp;Wiki about the original game: <a target="_blank" href="https://en.wikipedia.org/wiki/Battleship_(game)" rel="nofollow noopener">https://en.wikipedia.org/wiki/Battleship_(game)</a>&nbsp;Have fun, and please throw a like :)

Ships Battle Game

fun stuff

ShakaStudio

&nbsp;Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mmFilaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Night Gray Transmission Distance: 0.8 PLA+ Creality Orange Fluorescent Transmission Distance: 3.6 PLA+ JAYO Meta White Transmission Distance: 6Swap Instructions: Start with Black At layer #5 (0.88mm) swap to Night Gray At layer #6 (1.04mm) swap to Orange Fluorescent At layer #10 (1.68mm) swap to White for the rest.

Halloween Mansion - 4 Color Hueforge Filament Painting

HueForge

IK3Digital

This adorable Crochet Ghost that will be loved by kids and adults.&nbsp;It can be printed in colors or in a single color.&nbsp;It has been designed with lots of details, but it will also print quickly as it's hollow, and it does not need any supports at all to print!<blockquote>&nbsp;Please don't forget to follow and like my creations to not miss on any new models.</blockquote>&nbsp;*All of my models are for personal use only, if you would like to sell my prints of my models you can legally do so while you are an active member of my Patreon IK3D. You will receive monthly models and a welcome package when you join: &nbsp;<a target="_blank" href="https://www.patreon.com/IK3D" rel="nofollow noopener">IK3D Patreon</a>