zensqrl

VegaWoodWorks

A simple modern bird feeder. Everything prints with no supports. I recommend using PETG. Try using the Fuzzy Skin option for a nice finish. You will need a hook and nut to hang it.&nbsp;-Print the body in the orientation shown in the last picture and no supports are needed.

Modern Bird Feeder

Garden

taborskytomas

Wall hanger for my gravel bike with Shimano SPD pedals. It can be of course used also for other types of bikes with a tire width up to ca. 50 mm.&nbsp;For anchoring I used Fischer DuoPower plugs (8x40mm), for tire holders with 5mm wood screws, for pedal holder with 6mm wood screws. &nbsp;Inspired by:<a target="_blank" href="https://www.thingiverse.com/thing:3199106" rel="nofollow noopener">https://www.thingiverse.com/thing:3199106</a><a target="_blank" href="https://www.thingiverse.com/thing:2879289" rel="nofollow noopener">https://www.thingiverse.com/thing:2879289</a>

Bike wall hanger

Bike

a.vdh_1983

If you like my work, i'm open for donations via Paypal. It is much appreciated.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL</a>&nbsp;HueForge Lego Minifig Build Poster&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Bambu PLA Blue Transmission Distance: 5 PLA Bambu PLA Red Transmission Distance: 5 PLA Bambu PLA Yellow Transmission Distance: 5 PLA Bambu PLA White Matte Transmission Distance: 5Swap Instructions: Start with Blue At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #15 (1.28mm) swap to White Matte for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up.

4-color HueForge Lego Minifig Build Poster

Decor

william_edwards_iii

<h2>Summary</h2>The original Espresso dosing funnel by joochung is excellent, however I have the smaller 54mm portafilter used in my Breville Bambino espresso machine. I adjusted the sizing and the cutouts to accommodate my portafilter design<h2>Print Settings</h2>Printer: Bambu Lab X1-Carbon Rafts: NoSupports: No Resolution: .12mmInfill: 15%Filament: eSun PLA+, Black Notes: Printed at 15% infill using black PLA + from eSun at .12mm layer height. Others are obviously fine as well. I went with a smaller layer height to get better resolution on the funnel angle, but I ran test prints at up to .28mm layer heights and it works fine if you don't care about the resolution as much and just want a faster print.<h2>How I Designed This</h2>Updated using solidworks since I hate working with the SCAD files. I converted the original design from joochung into a solidworks file, then updated the dimensions and made 3 cutouts for the 54mm breville portafilter.

Espresso 54mm Dosing Funnel for Breville

Functional & Tools

WE3D Models

<h2>Stoned Snowman Ornament⛄️ </h2>Pre-painted 3MF included, just change filament colors. Use lots of purge for black to white! ** NOT FOR COMMERCIAL USE! ** For commercial use license visit:<a target="_blank" href="https://www.patreon.com/WE_3D" rel="nofollow noopener">https://www.patreon.com/WE_3D</a>

Stoned Snowman Christmas Ornament

Holidays

Fixumdude

Introducing the FDM (Fixum Dude Motors) print in place Jeep.&nbsp;Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Examples printed in PolyMaker Silk Chrome PLA, Eryone Dual Color Blue/Green Silk PLA and an unknown gold silk PLA.

Fixum Dude Motors PIP Jeep 

Kid Toys

tbarzak2018

Jeep Duck! I've seen many with the wrong amount of grille pieces and no rear wheel!&nbsp;Add Color! Add Font!

Jeep Duck - Accurate!

Jeep

Ryzwick

Designed from the ground up to use only as much filament as necessary, this stacking water bottle holder fits most sizes of water bottles. Easily stacks on top of each other with keyed grooves.

Stacking Bottle Holder - Fastest Print!

Organization

TomoDesigns

A unique and eye-catching way to remind you to keep your plants hydrated and healthy. This flower pot, shaped like a little man with a middle finger, is sure to catch your attention every time you see it. Whether placed on your desk at work or displayed in your home, this pot is sure to bring a smile to your face and serve as a constant reminder to care for your plants. This version has feet.&nbsp;It is print in place so no trouble with assembly. You don't need any supports either!&nbsp;Every make will be featured on my Instagram if you add your handle and follow me :) Check out <a target="_blank" href="https://www.instagram.com/tomo_designs/" rel="nofollow noopener">my Instagram</a> if you want to see more designs like this or if you have questions!&nbsp;Do you want to support me or become a reseller of my designs? Go take a look at my <a target="_blank" href="https://www.patreon.com/TomoDesigns" rel="nofollow noopener">Patreon!</a><figure class="image"><a href="https://makerworld.com/en/models/80984#profileId-86145" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/263716/2023-12-13_c21d6acd55375.png"></a></figure>

Middle Finger Happy Plant Pot

Planters

Procs Design

This is a decorative foldable gift box which you can use to gift small presents, decorate your desk, put under a tiny Christmas tree, store candies, and whatever you can think of. This design features a box base and a lid that fit together. I designed it so that it requires no glue, tape or screws; minimal purge waste to print; different designs to choose from; and two sizes, the smaller one being able to fit on an A1 mini. It uses a single layer thin living plastic hinges and tabs that allow you to fold and snap it together to a sturdy box (as sturdy as a thin layer of plastic that is) and is surprisingly strong! Since it prints flat and folds up, the designs can come from Hueforge and only requires multicolor filament changes at layers which significantly reduces purge waste! This also means that an AMS is not required but is helpful. Unfortunately, the sizes are a bit small as you can only fit so much of a foldable design on the print bed.&nbsp;Sizes (interior volume):<ul><li>Normal (Printable on X1C, P1S, P1P, A1): 7.5cm x 7.5cm x 7.5cm (2.95 in x 2.95 in x 2.95 in)</li><li>Small (Printable on X1C, P1S, P1P, A1, A1mini): 5cm x 5 cm x 5cm (1.96 in x 1.96 in x 1.96 in)</li></ul>&nbsp;Print instructions:<ul><li>Designs are separated by profiles, each pattern has two versions. One for the X1, P1, A1 printers, and one for the A1mini. The A1mini can only fit the small size while the X1, P1, A1 versions have both sizes! Read the description carefully and select the correct design you want. Make also sure to select the correct plates of the size you are interested in.</li><li>If you have an AMS, use only the AMS plates in the profiles! If you don't have an AMS, use the pause swap plates. When using the pause swap plates, it will pause at the color changes. Simply unload and load a new color filament and resume the print. The profile description has a description of the order of colors so make sure to read them.</li><li>All you need to do is decide on a pattern to print, then select my appropriate profile. Afterwards choose what plate you want to print, each plate will have a different part, size, and AMS requirement. Do not increase the number of copies as it will auto rotate the models which may cause the living hinges to fail.</li><li>Tolerances are tight for this model due to the living hinges. Please make sure that your printer can handle a 0.15mm gap. Otherwise it may be a bit difficult to bend the hinges or it may fuse together.</li><li>Make sure that your first layer bed adhesion is good, the living hinges are on the first layer and any first layer defect may affect the bend-ability.</li><li>Check back every now and then, I will be updating this box with more designs as I test and print them!</li></ul>&nbsp;Assembly InstructionsWhen removing your print from the print bed, please be gentle and slow. The living hinges are thin and can be torn off if you aggressively remove the print. If using a textured or hot plate, please wait for the plate to cool completely first before removal. If using a plate with high adhesion where you need to peel or pry it off because bending the plate doesn’t work, consider using a medium for easy release like a glue stick or hair spray. Please see documentation for bigger versions of these pictures.&nbsp;<figure class="image image_resized" style="width:50.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2023-12-31_c5d5f24f17c788.png"></figure><figure class="image image_resized" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/531581/2024-01-15_afe3359d3d038.png"></figure>&nbsp;Designs:Spiral Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Red (Spiral stripes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowflake Pattern: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Black (Snowflakes, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Maze: Two colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White (background, can be any color you want)</li><li>PLA Sunlu Blue (Maze walls, can be any color you want)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Poinsettia Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White</li><li>PLA Sunlu Red (Petals)</li><li>PLA Sunlu Grass green or Green (Leaves)</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Ornaments: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green (Ornament color, any base color should work like red or blue)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Snowy Trees: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Grass Green</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Watercolor Snowflake: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Overture Matte Light Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Starry Night: 4 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li><li>PLA Overture Matte Yellow</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Blue Marble: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue (or any base color you want your marble to be)</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;&nbsp;Great Wave: 3 colors, hueforge printPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu Black</li><li>PLA Sunlu Blue</li><li>PLA Sunlu White</li></ul>&nbsp;Swap Instructions:See my print profile description for swap instructions if you don't have an AMS. I have included print profiles with plates that have pauses included for your manual swapping needs, make sure to choose the right one!&nbsp;Hearts Pattern: Three colors, simple and fast printPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used:<ul><li>PLA Sunlu White </li><li>PLA Sunlu Red (lower hearts)</li><li>PLA Sunlu Sakura Pink (upper hearts)</li></ul>&nbsp;Swap Instructions:<ul><li>Start with White </li><li>At layer #5 (1.0mm) swap to Red or Pink (lower hearts)</li><li>At layer #8 (1.6mm) swap to Pink or Red (upper hearts)</li></ul>&nbsp;Basic Box and Basic SLIM Box: The basic box, no design on the walls for easy remixing or customizing.Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmAny color you want.Note the model differences:<ul><li>Basic Box has a wall thickness of the base at 2mm as all lids are designed to fit on a box that size.</li><li>Basic SLIM box has a lip of 2mm for the lid and the rest of the walls are 1mm for your remixing or sticker needs, choose that one if you want to add some depth to your box.</li><li>All lids are 1mm thick in this set, as nothing requires them to be thicker.</li><li>Keep in mind how it bends when adding details to the 3d model.</li></ul>&nbsp;&nbsp;Want to slice these files yourself?While I recommend you use the profiles I have prepared and tested, you can slice it yourself if you follow these recommendations:<ul><li>For all projects, make sure to print at 100% infill, it is thin enough that having sparse infill can cause surface defects with a minor reduction in filament used which is not worth it.</li><li>For all projects, the first layer must be 0.2mm thick, the living hinges are designed based on that thickness.</li><li>For any boxes that include Hueforge designs, please print layer height of 0.1mm with a base layer of 0.2mm.</li><li>Do not rotate the files or change the first layer infill pattern, the infill pattern must be 45 degrees to the walls of the model to allow the thin living hinge design to work well.</li><li>I do not recommend scaling the model, it has tight tolerances on the living hinge and Hueforge designs are optimized at a specific scale.</li></ul>&nbsp;Update Log2023/11/23 Release with 4 designs: Spiral pattern, Watercolor snowflake, Ornaments, Snowy trees2023/11/27 Update with 4 new designs: Snowflake pattern, Maze, Poinsettia pattern, Starry Night2023/12/03 Update with 1 new design and opened remixes: Basic Box + SLIM2023/12/31 Update with 2 new designs: Great Wave and Blue Marble2024/2/11 Update with 1 new design: Hearts Pattern

Foldable Gift Box Decorative

Gifts

NUKDDD

please give me a 👍🏻 if you like this, even if you don't download this, it’ll help more people discover this. thanks so much! Follow me for more.&nbsp;New STL and print profile now available for larger tea lights, up to 39mm.&nbsp;Teeny, the Tiny Tree is a simple but elegant lamp to sit on your shelf. Can be displayed all year anywhere in the house, day and night.&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfwi" rel="nofollow noopener">Silk</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;Assembly is straight forward, there are 2 parts. Simply put the tea light in the tree trunk and screw it to the bottom of the tree, and you're ready to go.&nbsp;Overall size of the tree plus stump: 100x128mm. The original trunk included with the tree will hold all LED tea lights up to 37mm. Download the trunk only if you have a larger light. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3vkDKtx" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;Have you met <a target="_blank" href="https://makerworld.com/en/models/95343#profileId-101704" rel="nofollow noopener">Stumpy</a> and <a target="_blank" href="https://makerworld.com/en/models/105102#profileId-112159" rel="nofollow noopener">Patty</a>?<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748279/2023-12-16_496e412673af1.gif"></figure>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Tiny Tree Lamp

Lights

jayburd

I have tried various splitter designs and none worked as reliably as I would have liked. This design utilizes the A1 AMS Lite Filament Hub ($6) sold on Bambu store as the splitter for AMS and external spool. As such, you end up with 4 usable inputs.&nbsp;The model is the splitter holder. It can be attached to the printer body using M3x6mm or M3x8mm screw. The A1 filament hub should sit snugly in the holder but with some play. The single tube side of the hub plugs into the PTFE connector as if it is a PTFE tube, it is a little tight so push it in as far as you can. &nbsp;In my testing, this has performed flawlessly. It would not be surprising as this design uses the OEM part that's designed specifically for the same purpose of multiplexing multiple filament input into one.&nbsp;Update: <a target="_blank" href="https://makerworld.com/en/models/35839#profileId-48557" rel="nofollow noopener">New angled holder</a> added based on feedback from <a target="_blank" href="https://makerworld.com/en/u/2841498950" rel="nofollow noopener">@BenjDavison90</a>. Listed as second print profile&nbsp;Update: revised the angled holder based on feedback from <a target="_blank" href="https://makerworld.com/en/u/2841498950" rel="nofollow noopener">@BenjDavison90</a>. Thanks again Ben&nbsp;Update Oct 26: added new print profile Straight V2, this version has two screw holes for mounting to the upper right corner of the rear panel of P1P, P1S, X1C&nbsp;To purchase the A1 AMS Lite Filament Hub (shown in the second picture)US: <a target="_blank" href="https://us.store.bambulab.com/products/ams-lite-filament-hub" rel="nofollow noopener">https://us.store.bambulab.com/products/ams-lite-filament-hub</a>EU: <a target="_blank" href="https://eu.store.bambulab.com/products/ams-lite-filament-hub?skr=yes" rel="nofollow noopener">https://eu.store.bambulab.com/products/ams-lite-filament-hub?skr=yes</a>UK: <a target="_blank" href="https://uk.store.bambulab.com/products/ams-lite-filament-hub?skr=yes" rel="nofollow noopener">https://uk.store.bambulab.com/products/ams-lite-filament-hub?skr=yes</a>&nbsp;