zaytnax

Reimu

类似tti pitviper的制退器设计（应该）颜值还算能看吧（大概）适用于Glock19 Gen3，或者国内玩家更加熟知的核心X1，导轨固定设计有一定公差，紧实固定需要垫一些餐巾纸增加摩擦或者有大佬愿意给我改改模型加个螺丝固定在格洛克下导轨的凹槽我也很乐意（逃）提供step可修改格式的文件老早之前画的了，这次发出来主要是凑积分兑换礼品卡&nbsp;Design similar to tti pitviper (should) have a decent appearance (maybe)&nbsp;Suitable for Glock19 Gen3 Airsoft, the rail fixing design has a certain tolerance, and tight fixation requires some napkins to increase friction&nbsp;Or if there is a big shot willing to modify the model for me and add a screw to fix it in the groove of the Glock lower guide rail, I am also willing toprovide a file in step modifiable format.&nbsp;I drew it a long time ago, and this time I'm sending it out mainly to earn points and exchange for gift cards

格洛克19类沙漠蝰蛇枪口补偿器Airsoft Glock 19 Gen3 Similar to TTI pitviper Muzzle compensator

zaytnax pc

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Deer Voronoi

apex3D

Convenient cup holder for sim rig.Different mounting options.&nbsp;Fits any 4040 or 8040 profile, mounts with 1 or 2 bolts, so easy to place anywhere you want.&nbsp;Easy to print without any supports

Cup holder for sim rig 8040

sim kokpit

SavageLau

Hey guys, this is my table organizer design for MakerWorld Office helper contest. (3/5)&nbsp;This design have many elements. Please check detail description and print profile break down below:All design is muti-color capable, but takes really long time to print.This design have some big first layer models. Make sure you clean your build plate, and enable bed leveling before prints. Some of the boxes edges might very easy to curve up, if you fail to do so.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_35ec2371ea6de.png"></figure>&nbsp;<h2>Elements:</h2><h3>Tunnel:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_1e83b412309e9.png"></figure><h3>Block box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6d6e9fe944d04.png"></figure><h3>Question box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_f36ac575df8b9.png"></figure><h3>Star and coin container:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_5810c509a6e7e.png"></figure><h3>Bucket:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-26_d13696b40a3b.png"></figure><h3>Holder 4 & 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6b8e4c56fd1e2.png"></figure><h3>Drawer 4 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_b9b71497afbdd.png"></figure><h3>Drawer 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_be968b6848ba9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_54f4281440f91.png"></figure>&nbsp;<h3>Muti-color:</h3>It is very easy to paint the model. But takes way too long to print, so I did not put it on my printing profile. You can try it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_ce2597d7373d2.png"></figure>&nbsp;<h2>Filaments color: </h2>@dprodriguezf was comment regarding filament colors, here is the lists:Tunnel: Bambu Lab PLA (Green)Coin/Start container: Creality Ender PLA (Skin)Questions box: Sovol PLA (blue)Bucket: R3D UV-color change PLA (Pink)Short block: wood, R3D UV-color change PLA (Purple)Longer block: Giantram PLA (Blue Marbel), Giantram PLA (Matte Terracotta)Drawer 3 slots: Creality HP Series (Matte red)Drawer 4 slots: 3DF (Coral)

Modular Mario desk organizer

Ada basmak istediklerim

mat64680

Voici un model de lampe Tour eiffel avec une télécommande très facile à réalisé.&nbsp;Il y aura juste besoin de faire un petit trou avec une perceuse pour faire passer le fils ou vous le souhaité.&nbsp;Model du lumière trouvable facilement sur Tému ou aliexpress . <a target="_blank" href="https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099531853631&_x_vst_scene=adg&_x_ads_sub_channel=shopping&_x_ns_prz_type=3&_x_ns_sku_id=17592195105650&_x_ads_channel=google&_x_gmc_account=742384653&_x_login_type=Google&_x_ads_account=5198328713&_x_ads_set=20478174405&_x_ads_id=153241502112&_x_ads_creative_id=670804270269&_x_ns_source=g&_x_ns_gclid=CjwKCAjw9-6oBhBaEiwAHv1QvGhrEiKVxzmAqU5xKLu2ku_8qSiMxezx5NfNmuIB4oBsg9pWGzpQdxoCgwAQAvD_BwE&_x_ns_placement=&_x_ns_match_type=&_x_ns_ad_position=&_x_ns_product_id=17592195105650&_x_ns_target=&_x_ns_devicemodel=&_x_ns_wbraid=CjkKCQjw1OmoBhDJARIoAJKtPI2xLOkdePQHvfGoWBpBVCr5ZvmlMd9SgnSwnB9ixFGMUXLT4BoCPI8&_x_ns_gbraid=0AAAAAo4mICEp_-Vm-6_8VFOXguLIGG82d&_x_ns_targetid=pla-2107749097830&_x_sessn_id=36aspn3pg4&refer_page_name=bgt_order_detail&refer_page_id=10045_1710243333629_dic02sodri&refer_page_sn=10045" rel="nofollow noopener">ICI</a>J ai utilisé le 10m 100 lumières.&nbsp;======Here is a model of Eiffel Tower lamp with a remote control that is very easy to make.&nbsp;You will just need to make a small hole with a drill to pass the wire where you want it.&nbsp;Light model easily found on Tému or aliexpress. <a target="_blank" href="https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099531853631&_x_vst_scene=adg&_x_ads_sub_channel=shopping&_x_ns_prz_type=3&_x_ns_sku_id=17592195105650&_x_ads_channel=google&_x_gmc_account=742384653&_x_login_type=Google&_x_ads_account=5198328713&_x_ads_set=20478174405&_x_ads_id=153241502112&_x_ads_creative_id=670804270269&_x_ns_source=g&_x_ns_gclid=CjwKCAjw9-6oBhBaEiwAHv1QvGhrEiKVxzmAqU5xKLu2ku_8qSiMxezx5NfNmuIB4oBsg9pWGzpQdxoCgwAQAvD_BwE&_x_ns_placement=&_x_ns_match_type=&_x_ns_ad_position=&_x_ns_product_id=17592195105650&_x_ns_target=&_x_ns_devicemodel=&_x_ns_wbraid=CjkKCQjw1OmoBhDJARIoAJKtPI2xLOkdePQHvfGoWBpBVCr5ZvmlMd9SgnSwnB9ixFGMUXLT4BoCPI8&_x_ns_gbraid=0AAAAAo4mICEp_-Vm-6_8VFOXguLIGG82d&_x_ns_targetid=pla-2107749097830&_x_sessn_id=36aspn3pg4&refer_page_name=bgt_order_detail&refer_page_id=10045_1710243333629_dic02sodri&refer_page_sn=10045" rel="nofollow noopener">HERE</a>I used the 10m 100 lights.&nbsp;&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/zj4bIDxj4iw?si=GqmbL4Lpv6W-ovTd"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=zj4bIDxj4iw"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/zj4bIDxj4iw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Lamp Tour Eiffel / Eiffel Tower lamp 41cm

Gary Riches

The model this was remixed from was great, but had a 12 hour print time. This one is reduced to around 8 and uses considerably less filament. Depending on how your printer is with overhangs you may need supports.

Meta/Oculus Quest 2 Wall Mount

st0rmbreaker179

This is the Karambit from the video game The Cycle: Frontier. We can all finally be Fortunas' Favored. Enjoy!

Karambit from The Cycle: Frontier

valorant

mail.iou

UPDATE11/22/2023 add new profile 150x150mm.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.

Space Cat (HueForge)

2d art

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project. Update 27/12/2022.I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also added a small L or R on the left and right side parts to help people distinguish between them for the MOD installation.I've also added step and stl files for blank ‘Round Side Parts’ in case anyone would like to add there own logo to them.Check out Uncle Jessy's build!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Gv7w95ECAoE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gv7w95ECAoE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is your new best friend!!!The companion cube mod is a must have for any Bambu Lab P1P owner. And any portal fan.This is purely a aesthetic MOD. You do not need to touch the electronics at all!I've provided a detailed assembly guide as a downloadable PDF. Just download this as you download the STL's. And please please please follow the instructions. It's not a complicated build. Allot of it is common sense. But there will be some instructions that would prove useful to follow in a particular order. I also recommend giving it a quick read before you start printing all of the parts.You will also require superglue for this build.I recommend a couple of spools of grey PETG. A couple of white pla. And a small amount of pink pla. Just refer to the sheet below<figure class="table" style="width:462pt;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border-bottom-color:rgb(191, 191, 191);border-bottom-width:1px;border-left-color:rgb(191, 191, 191);border-left-width:1px;border-right-color:black;border-right-width:1pt;border-style:solid;border-top-color:rgb(191, 191, 191);border-top-width:1px;height:33pt;padding:0.4em;vertical-align:top;width:462pt;" colspan="3">As a reference each 1 KG spool carrys an average of 330 meters</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Totals</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Required Material In Meters ( Approx )</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Grams ( approx )</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">White - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">618.48</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1843.07</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Grey - PETG</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">390.93</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1192.34</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15.75pt;padding:0.4em;vertical-align:top;">Pink - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">47.72</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">142.21</td></tr></tbody></table></figure>All parts are printable on a Bambu Lab P1P.But I did print on the slowest setting on the P1P.If you would like to use an AMS with this MOD, I've been informed you can so with the below additional MODs installed.To sit the AMS unit on top of the printer with the Companion Cube Mod installed.<a target="_blank" href="https://www.printables.com/model/397718-p1p-ams-legs-companion-cube" rel="nofollow noopener">https://www.printables.com/model/397718-p1p-ams-legs-companion-cube</a>To help guide the PFTE tube.<a target="_blank" href="https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket" rel="nofollow noopener">https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket</a> PTFE Tube Y-Splitter. <a target="_blank" href="https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec," rel="nofollow noopener">https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec,</a> this way you can run either AMS or spool.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Companion Cube P1P Mod ( Bambu Lab )

bamx1

Hiko 3D

Death Pixel Keycap ⌨☠&nbsp;a new keycap, easy to print in multiple colors 💚💛🧡💙&nbsp;You can create it to decorate your keyboard ⌨🎨&nbsp;I recommend not using such high speeds and only need supports on the internal part. &nbsp;This design and many more can be found on my patreon 👈&nbsp;

Death pixel Keycap

keycap

Jal Shah

To continue on the previously designed tetrahedron lamp, I designed dodecahedron lamp. I also found tetrahedron lamp to be a bit on a smaller side, so this time I wanted something larger. This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.<h3>Printing</h3>Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.<h5>LED Version</h5><ul><li>11 Frame Pieces</li><li>1 Frame with Hole for LED Strip Wire</li><li>12 Insert Pattern Pieces</li><li>12 Insert Films (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Pendant Light Version</h5><ul><li>12 Frame Pieces</li><li>11 Insert Pattern Pieces</li><li>1 Insert Pattern - For E26_E27 Pendant Lamp</li><li>11 Insert Films (Pattern 1 or Pattern 2)</li><li>1 Insert Film - For E26_E27 Pendant Lamp (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Stand</h5><ul><li>1 Stand Top</li><li>1 Legs Connector</li><li>5 Legs</li></ul><h3>Assembly</h3><ul><li>Glue \ Press fit inserts into frames.</li><li>I used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well.</li><li>Stick printed inserts or vellum paper to the inside of the frames.</li><li>Glue all frames together using alignment keys and keeping the bottom side open.</li><li>Finish led work or pendant lamp before inserting the bottom insert. I used pendant light wiring kit myself.</li><li>Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.</li></ul>

Dodecahedron Lamp

house

3DPrintNovesia

<h3>Print order:</h3><ol><li>Rose Shaft(0,1mm Layerheight for the first 3 Layers)</li><li>Pin</li><li>Blossom (0,1mm Layerheight)</li></ol>&nbsp;<h3>Assembly Instructions: Rose shaft:</h3><ul><li>After Printing the the shaft hold it in the direction it was printed and use heat from a lighter under each green leaf. </li><li>Just a small and quick flame. You will see that the leaf will instantly curl into the right direction. afterwards you will have a leaf “bowl” on top of the rose shaft.</li><li>If you want bigger leafs, just use a brim!</li></ul><figure class="image image_resized" style="width:39.03%;"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/fdb8a623-3de2-45bf-95d8-a25301d8cb9d/ezgifcom-gif-maker-1.gif#%7B%22uuid%22%3A%2242ec431a-2589-4389-83a8-74c4b751d1bb%22%2C%22w%22%3A400%2C%22h%22%3A707%7D"></figure><h3>Blossom:</h3><ul><li>After Printing the Blossom curl it up from the side without the hole. If you have a bit trouble to wind it up, use warm water or a hairdryer to soften the petals! </li><li>The Last piece (Hole) need to be bended under the Blossom as a “base” you can use a bit glue to hold down the Blossom to the Base part.</li><li>If you want bigger Petals, just use a brim!</li></ul><figure class="image image-style-align-center"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/69d203f3-09a3-4f78-bb13-50172dcf1830/ezgifcom-gif-maker-4.gif#%7B%22uuid%22%3A%22aabf3d65-ca76-417b-80b0-4bd0896d944c%22%2C%22w%22%3A320%2C%22h%22%3A320%7D"></figure><h4>If you like, you can also lasercut the blossom out of some thin material. just use the svg file!</h4><h4>Important! Don't print the blossom file thicker than 0,3mm. Otherwise it will be to thick to wind it up! </h4>&nbsp;After these Steps you can push the pin trough the middle of the blossom through the hole in the base of it and mount it (with a tiny drop of glue) onto the shaft! And you are Ready with your realisic 3d rinted rose with filigree petals&nbsp;<figure class="image image-style-align-center"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/5994e66d-ef08-47af-90c0-27183e8f3db6/c1c3c344-5a59-44cd-89e7-3a7e14ecb0a4.gif#%7B%22uuid%22%3A%221c06281a-242d-41c8-8444-2914badee952%22%2C%22w%22%3A270%2C%22h%22%3A360%7D"></figure> Filament used: Redline Raspberryred: <a href="https://www.redline-filament.com/collections/silky-pla/products/silky-pla-himbeerrot" rel="nofollow">Red</a> Redline Apple Green: <a href="https://www.redline-filament.com/collections/pla-filament/products/pla-apfel-grun" rel="nofollow">Green</a>Here is a longer Video how to assemble it: https://www.reddit.com/r/3Dprinting/comments/srkuiz/someone_posted_my_design_of_a_3d_printed_rollup/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Super Realistic Rose (Roll-Up Design)

ada kumsal

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. They are up to date with whatever changes I make. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE 24 Nov 2023</h3>Previous writeup - “…One of the ideas was to attach a bin/basket on the end of the cantilever x-axis. But based on experience with cantilever printers, it is never a good idea to hang a bin/basket at the extreme end of the X-axis extrusion, regardless of how robust the Z-axis linear rail is… ”&nbsp;I was not entirely right. While hanging a bin/basket at the end of a cantilever was never a good idea, attaching a lightweight guide/baffle is a very good idea. I looked at the designs by others and CAD what I think is a combination of what was good. Together with a shorter bin, I added Option 3 - Short Bin with <a target="_blank" href="https://makerworld.com/en/models/72654#profileId-77178" rel="nofollow noopener">Pruge Guide</a>. I have updated this project's 3mf file.&nbsp;The short bin uses the same magnetic docking system. So you will still need to print the magnetic docks D1 (plate 1).&nbsp;In addition, I have also increased the capacity of the bin without an increase in footprint.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_0bf6f9d142792.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_ab21b4e9da909.png"></figure></td></tr></tbody></table></figure>&nbsp;This is the first of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer.<ol><li>A1 mini Poop Management System (PMS)</li><li><a target="_blank" href="https://makerworld.com/en/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.&nbsp;The price is 10€ with tracked shipping at 5€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labour are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. A small royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, software subscription, etc&nbsp;<h3>INTRODUCTION</h3>While unboxing my A1 mini combo, I noticed it needs a Poop Management System (PMS) to collect the filament poop during purging.The simple yet futuristic design of the A1 mini fuels my imagination and hence, my design for the PMS takes on the look and feel of a space station and docking bay.As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing PMS:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use.</li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Will not cause accidental purge clogging</li><li>No support needed</li><li>Printed in PLA.</li></ul>&nbsp;There are 3 PMS options:<ul><li>Option 1 - An eco-friendly design using the filament cardboard box as a ReCycle PMS.</li><li>Option 2A - A fully printed Bin</li><li>Option 2B - For users who print extensively, a printed Chute to guide the poop down into your regular waste bin</li><li>Option 3 - A short bin with a purge guide/baffle that is attached to the purge wiper (recommended)</li></ul>&nbsp;You will need to print a pair of docking bays (D-1) which the PMS will be connected to the A1 mini printer.All the above PMS are magnetically attached with Ø6x3 magnets to the D-1 docking bays.The D-1 will be secured to the A1 mini printer using VHB tapes (or similar mounting tape that is 1mm in thickness).&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-25_64c946113b006.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_7c8a4c70fff1a.png"></figure>&nbsp;<h3>BOM</h3><ol><li>Ø6x3 magnets - 8pcs</li><li>1mm VHB tape (10x20mm) - 4pcs</li><li>Thin double-sided tape - For ReCycle Bin only</li></ol>** Note that the VHB tape (or any double-sided tape) has to be 1mm thick. This is because the recess I made is 0.8mm, allowing the dock to flush with the printer.&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings.The STLs are also available in folders.I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.Print plate 1 - Docking bracket. Both front and back docking brackets are required.Print either Option 1, 2A/2B or 3 depending on the configuration you want.If you are using Option 2A/2B. You will need to print plate 3 - Shield top.If you are using Option 3, you will need to print plates 6 & 7<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_75bf1beab3e79.png"></figure>&nbsp;Docking Bracket (D-1)<ul><li>Press fit the Ø6x3mm magnets into the docking bracket. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_1a49a648dbdd6.png"></figure>&nbsp;<ul><li>Paste the VHB tapes onto the docking bracket.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_4c335b1b1604d.png"></figure>&nbsp;Option 1 - ReCycle Bin<ul><li>Press fit the Ø6x3mm magnets into the ReCycle brackets. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_m65ncfzfjsze.png"></figure>&nbsp;<ul><li>To attach the spool box, place double-sided tapes on the inner side of ReCycle brackets.</li><li>The dimension of the bracket is based on Bambu Lab filament with spool cardboard box. There might be some size differences with other brands' boxes, but the double-sided tape should hold it well.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_vwvwl5p02bed.png"></figure>&nbsp;<ul><li>Cut the spool box according to the dimensions as seen in the image. No more than 55mm from the bottom and no less than 100mm wide.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_3mxezvsmjkis.png"></figure>&nbsp;<ul><li>Install spool box to ReCycle brackets</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_mrjcdjvanqw3.png"></figure>&nbsp;Option 2A Bin & 2B Chute<ul><li>Press fit the Ø6x3mm magnets into the bottom piece. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_1lf2xxu3vhu2.png"></figure>&nbsp;<ul><li>Glue the top and bottom pieces together. The tongue and grove design will assist in alignment.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_fm7yr0fxfedn.png"></figure>&nbsp;Option 3 - Short Bin with Pruge Guide<ul><li>In addition to plate 1, you have to print plates 6 & 7.</li><li>Install the magnets the same way as all the other bins</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li></ul><figure class="image image_resized" style="width:477.812px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_9f22dcecbc243.png"></figure><ul><li>Install image</li></ul><figure class="image image_resized" style="width:477.571px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_6724c482cd6c7.jpg"></figure>&nbsp;&nbsp;Installing to the Printer<ul><li>Home and turn off printer. Push the toolhead all the way to the left of the X-gantry.</li><li>Attach the D-1 brackets to the ReCycle/Bin/Chute.</li><li>Align it with the X-gantry, make sure the poop will drop into the ReCycle/Bin/Chute and stick the D-1 bracket to the printer body.</li><li>Note that part of the D-1 bracket will slide under the printer.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_5900afd4bb049.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_qv4fqhizk58s.jpg"></figure><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_ciofeugx7tly.jpg"></figure>&nbsp;<ul><li>Turn on the printer and do a homing. Watch and check. The poop shooter should not be pressing down on any part during homing.</li><li>Enjoy a neat and poop-less work table.</li></ul>&nbsp;<h3>VIDS & PICS</h3>Modbot showcased the ReCycle bin version on his A1 stream. Scroll to 26 minutes to see how it works.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Fks_nOL2eys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Fks_nOL2eys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Modbot showcased the bin version 2A, the build plate holder and the stylus+scraper holder.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=P4EphELNuw8&t=211s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/P4EphELNuw8?start=211" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like what I designed and want to contribute to my coffee addiction, software subscription and filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells)&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 Mini Purge Bucket Bin Poop Management System Bambu Lab

bambu a1

Jorge Rui

<h2>Introduction</h2>Disclaimer: This model is part of the Creator Program, when you purchase the Wireless MouseComponents Kit-002 through the links below, creators may earn an affiliate commission as a reward of theirwork.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cpnt" rel="nofollow noopener">Wireless Mouse Components Kit 002</a>Recommended filaments: <a target="_blank" href="https://shrsl.com/4cvrb" rel="nofollow noopener">Matte PLA</a> or if you prefer <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Basic PLA</a>, that said, you can use <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">any filament</a> you like as long is not TPU ;)&nbsp;<h2>Characteristics</h2><ul><li>With anthropometric dimensions between medium and large, it should be good for anyone with hands within this percentile;</li><li>It is oriented towards right-handed people;</li><li>In addition, to the usual rest area for the thumb, I also provided a rest area for the little finger, something that unfortunately the mouse I usually use does not have (MX Master 3);</li><li>4 button: Left, right and middle (on the scroll wheel) and a top middle button.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-10-21_706551f6f8569.jpg"></figure>&nbsp;You can find a monocolor and a multicolor version on the print profile. I advise you to test print the monocolor and see if it is ok for you, it is a fast print more or less 2 hours in total.&nbsp;<h2>Note</h2><ol><li>The mouse needs to be functional and tolerances are not the same has an injection mold part, so some zones have to be adjusted to better fit the 3D print process, on of does zones is the gap between the buttons and the rest of the shell.</li><li>The mouse needs to be 3D printed with the least amount of supports, and none or almost none supporting the external shell, this to limits the design</li><li>Last, this fits on bambu lab kit (version 002), I&#39;ve opted not to change their internal chassis, this way you can change tops easily :)</li></ol><h2>Change Log</h2><ul><li>08-11-2023 - Added a version without logo to the 3MF profile file.</li></ul><figure class="image image_resized" style="width: 39.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-11-08_532c0ee336a62.jpg"></figure><ul><li>26-05-2024 - A new mouse was released, the “Ergo Mouse”. You can find it here: <a target="_blank" href="https://makerworld.com/en/models/469851?designId=469851#profileId-385684" rel="nofollow noopener">Ergo Mouse I1</a></li></ul><figure class="image image_resized" style="width: 38.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2024-05-26_19eade05c2864.png"></figure>&nbsp;