yogadedra

jdicerchio

Spice up your summer with these strawberry earrings! This print profile is for a 0.04 nozzle and it works great but a 0.02 nozzle gives much better results if you are having issues.&nbsp;Other earrings available here!&nbsp;Strawberry Earrings: https://makerworld.com/en/models/504789#profileId-420444Pencil Earrings: https://makerworld.com/en/models/504778#profileId-420433Orange/Lime/Lemon Earrings: https://makerworld.com/en/models/504776#profileId-420426Avocado Earrings: https://makerworld.com/en/models/504768#profileId-420418Watermelon Earrings: https://makerworld.com/en/models/498705#profileId-413337Firecracker Earrings: https://makerworld.com/en/models/477719#profileId-388811&nbsp;

Strawberry earrings

Earrings

Yarn Bowl

Laura12

Thought as a companion piece to this <a target="_blank" href="https://makerworld.com/en/models/52744#profileId-54540" rel="nofollow noopener">make up organizer,</a> this organizer can also work well as a pen holder or any desk organizer. It has 9 24x24 mm compartments.

(smaller) Make up Organizer

make up Organizer

JamesThePrinter

This coaster's woven appearance was designed to replicate the look of a basket. Because of the woven pattern, your glass will sit about 5mm above the base. This allows any condensation from your glass to easily run off into the weave and keep in away from your tabletop.This is part of my Woven Series. Find all of my woven models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/18924" rel="nofollow noopener">here.</a>Featured on 3DMN:<figure class="media"><div data-oembed-url="https://m.youtube.com/watch?v=biru0swL_yo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/biru0swL_yo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filament used in the pictures above is polymaker PolyTerra Army Beige PLA

Woven Coasters

Coasters, Trays, Bowls

AEKI

I needed a sign for my plants, so i made a customizable plant sign in Make my sign everybody can customize it by clicking on “customize”take a screenshot of the result and post it into the comment section , I&#39;d love to see it !

Customizable plant Label

Garden

Benjamin Kott

Stackable Storage Bin/Box (Fully Parameterized) with Fusion 360 Source Files.&nbsp;Use the available print profiles if you want to have a specific size, if you are more into tinkering fetch the Fusion 360 file and enjoy all the customizable parameters. The model is designed so that all dividers are auto-calculated and evenly spaced, this also applies to an auto-calculated label size. There is no need to fiddle around with manual settings, define the basic parameters, and watch the magic math 😊.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/f96xw8hRov4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/f96xw8hRov4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Features</h3><ul><li>Dividers for width and length</li><li>Insert for a label</li><li>No support</li><li>Reinforced Corners for better stability</li></ul><h3>Customizable Parameters</h3><ul><li>Length</li><li>Width</li><li>Height</li><li>Corner Radius</li><li>Wall Thickness (recommend 1.2mm for smaller / 2mm for big boxes)</li><li>Divider Size</li><li>Baseplate Height</li></ul><h3>Print recommendations</h3>If you are not using the provided print profiles, set the bottom layers to 5 - otherwise, the base can be too fragile. Do not scale the model up and down in the slicer, if you need a different size - ask for it or use the Fusion 360 Raw file to customize it yourself.&nbsp;There are 3 build plates per print profile:<ul><li>Box</li><li>Divider 1 With (left to right)</li><li>Divider 2 Length (front to back)</li></ul>Only print the dividers if you need them, and duplicate them on the plate so you get the amount you need.<h3>Print your labels</h3>The label sizes are noted in the print profiles. If you are 3D Printing your labels, the height of the baseplate of the label needs to be 1mm. Use Make My Sign to create your own: <a target="_blank" href="https://makerworld.com/de/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/de/makerlab/makeMySign</a>But maybe a piece of paper is enough 😉.<h3>Why another Stackable Storage bin model?</h3>It is the same issue with most other models; the designs are static.I need a model flexible, that can easily adapt to any size I need without slicer scaling compromises.I like to build stuff and love solving problems 😅.<h3>Timelapse</h3><figure class="media"><div data-oembed-url="https://youtu.be/So26t3TSLrM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/So26t3TSLrM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>More Fusion 360 Parameterized Models</h3><ul><li>Organizer Box <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li><li>Under Desk Drawer <a target="_blank" href="https://makerworld.com/en/models/145324" rel="nofollow noopener">https://makerworld.com/en/models/145324</a></li></ul>

Storage Box / Boxes Stackable

Storage Bins

eclien

This is a <a target="_blank" href="https://www.amazon.com/BIGTREETECH-Compatible-Multi-Printers-Management-Compatibility/dp/B0CSSM5PY2?&amp;linkCode=ll1&amp;tag=eclsnowman-20&amp;linkId=11147335ea17c5ad64420452b42bb1f2&amp;language=en_US&amp;ref_=as_li_ss_tl" rel="nofollow noopener">Bigtreetech Panda Touch</a> Mount and is a remix of the great work by <a target="_blank" href="https://makerworld.com/en/@Pretzel3D" rel="nofollow noopener">@Pretzel3D</a>. The issue I had with the original was it sat too high for the top glass to be removed when I used the AMS Riser by <a target="_blank" href="https://makerworld.com/en/@SpectreGadget" rel="nofollow noopener">@SpectreGadget</a>. So this is my LowRider version which allows the glass to be removed, but still avoids the door below the screen.&nbsp;You will need Qty:5 - 8mm diameter x 3mm thick neodymium magnets to glue into the mount (Unless you want to pull the ones from the factory mount which I wanted to avoid)&nbsp;I also included a cable guide which I printed and double sided taped in place to route the USB-C cable out to the screen.&nbsp;I hope you find it useful. And if you want to do any remixes yourself, I have included a STEP file, and have a link to the Onshape file I used.&nbsp;Onshape: <a target="_blank" href="https://cad.onshape.com/documents/03b72949cd8549f69b760d6d/w/ec728c7d966369d00abf63eb/e/347cb160af7952b600205a07?renderMode=0&amp;uiState=6627cbe9150fda109c1fb9b7" rel="nofollow noopener">https://cad.onshape.com/documents/03b72949cd8549f69b760d6d/w/ec728c7d966369d00abf63eb/e/347cb160af7952b600205a07?renderMode=0&amp;uiState=6627cbe9150fda109c1fb9b7</a>

Panda Touch Lowrider Mount

Syxiaolu94

AMS简易标签 AMS Simple Label<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447163/design/2024-04-29_fe4b4e6225814.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447163/design/2024-04-29_13a95514f64f6.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447163/design/2024-04-29_95c6c0f0495ae.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447163/design/2024-04-29_55d739a771dea.jpg">

AMS Lite Numbers 简易标签

A1 files

Makers.m3D

Nice customizable keychain for Mother&#39;s Day https://linkfly.to/Makersm3D

FLIP KEYCHAIN, CUSTOMIZABLE TEXT. (MOTHER'S DAY)

Keychain

WiscoPrinter

3/8" socket set organizer for toolbox. dimensions are similar to Oslo and other organizers sold on Amazon. Prints in 2 pieces to fit on a <200mm plate, and can be glued together using included pins. &nbsp;SAE from 5/16" to 7/8". Metric from 9-21mm.

3/8" Socket Set Toolbox Organizer

Brett

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Crocks

LiL_PPJ

mini milk crate

Crate

3DMON maker

I like MihaiDesigns' idea and the P1P Armor Modplate. This is a remix of Bambu Lab AMS Stacking Stand with Armor Modplate style.All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet.&nbsp;Updated on Jan. 7th, 2004- The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it.- Also, you can add one more bracing when you use the wall extension for more rigidity.&nbsp;Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended.* If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2.* All pins are redesigned for better strength. Thanks for the great idea! <a target="_blank" href="https://www.printables.com/@djwhouse" rel="nofollow noopener">@djwhouse</a> Now, pins can be printed horizontally.<ul><li>Pin1 v2(13mm) & Lock : for assembling bracing parts.</li><li>Pin2 v2(40mm) : for adding side wall extensions.</li><li>*Pin3 v2(20mm) : for joining bracing assembly and side walls.</li><li>*Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.</li></ul>&nbsp;If you need a build plate holder version, please check the link below.<a target="_blank" href="https://makerworld.com/en/models/62232#profileId-64745" rel="nofollow noopener">https://makerworld.com/en/models/62232#profileId-64745</a>&nbsp;

AMS Stacking Stand Remix

ams stand

Mandala

JabHook

*UPDATED FILE 3-7-2024&nbsp;I have worked on this model since it was placed here and am releasing version 2 - The lid has a major update where it now will snap together which enables the tumbler to have a nice clean look and the lid fits flush with the cup brim.  tree supports are added where needed.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_cc0b77770ff58.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_0a351c94d6685.jpeg">Assembly for the lid -  grab a small pliers and remove the little support under the middle of the top lid piece.  place a small dab of glue in there and snap the bottom part of the lid to that.  let it dry and you are all set to go.&nbsp;&nbsp;Here is a replica of the famous Stanley tumbler but in a keychain version.There is storage inside so you can keep your daily pill(s) if you are on the go, a folded bill (money), earrings, or other small items.&nbsp;Have fun!

Tumbler keychain - Stanley version, storage inside for pills, cash, or small item

STLWarehouse

This is to support a strawberry plant through growth. put each half around the core plant and as the strawberries start to grow they will rest on the support instead of the ground. Keeps a lot of ground-dwelling bugs off of the fruit as well.The model is cut right down the middle, with three supports for each half. This allows you to change the size of the internal hole as the strawberry plant grows. Ensure each half is far enough away from the other during the print that they don't fuse.Recommend printing in PETG to ensure the Sun and UV don't ruin it outside over time. These should last several seasons.&nbsp;

Strawberry Growing Supports

Victor

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:<a href="https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm" rel="nofollow">https://www.printables.com/model/280190-thickness-reference-rules-wall-layer-05-to-5mm</a>&nbsp;Thank you for printing my model!If you'd like you can buy me a coffee here: <a href="https://www.buymeacoffee.com/vitim" rel="nofollow">https://www.buymeacoffee.com/vitim</a>

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm - Keychain Version

Helper files

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>

Bamboo Dragon Cinderwing3D X BambuLab

Animals

3DFashionFreak

Original earrings and easy to print.

Letter Heart Earrings

Jewelry

Wiseone

The curious discards from the Bambu 3D printer, left unattended, will litter your desk or floor. Here is yet another "poop chute" to divert the filament effluent into an adjacent receptacle.&nbsp;My design consists of two parts, a chute and a bin or "poop tray". The chute catches the filament waste and diverts it into an easier to get to small bin. The design aims to be minimal in print material, yet functional.&nbsp;The chute secures to the back of the Bambu printer via a 3mm x 7mm self-tapping screw. The screw should be enough to retain the chute in position. Otherwise, double sided tape can assist. The bin comes in two sizes (50 and 100mm widths) and sits freely at the base of the chute and captures the waste.&nbsp;With regards to a replacement screw, here's a couple of suggestions from my followers:    1.  If you got your printer with the AMS, the screw that held it to the print bed is the perfect size to hold this in place.    2.  The screws included with your Bambu printer to make up the scraper fit nicely, too.&nbsp;My print is made in 1.75mm Bambu PLA Green filament, with 0.24mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. Print supports are not required.&nbsp;I hope you can find this print useful, too.&nbsp;UPDATE 12/12/2023 Added a 100mm wide poop chute bin.

Poop Chute (Yet Another) - UPDATED

CodingWagon

Heart Shaped Double Spinner with the word “Love” in the middle! &nbsp;Only 3 filament changes&nbsp;Perfect for Valentine's Day gift exchange in schools or as a small gift for friends and family.&nbsp;Also, don't forget to check out my “Love is” Spinners:<a target="_blank" href="https://makerworld.com/en/models/154562#profileId-169007" rel="nofollow noopener">https://makerworld.com/en/models/154562#profileId-169007</a>&nbsp;

Dual Color Heart Double Spinner

Fidget

ihateu3

This is a stackable glueless rack system for storing your filament spools and boxes. The assembly of the rack is pretty self-explanatory through the pictures. You connect a male part to a female part, do this two times to assemble a rectangle. The diameter of the part is .725 and is designed to use low-cost and easily available 1/2 EMT conduit which has an OD of .706". Keep this in mind if you would like to source something else. In my example, I bought 10ft pieces of EMT (for around $5.00) and cut them down to 2ft sections. You can use whatever length you want, but you may need to use the printed pieces in between long stretches of conduit. These can be glued if needed/wanted, but the included dowel is a fairly nice friction fit, but that will depend on how well your printer is dialed in.

Filament Spool Rack - Stackable - Glueless

Filament Helper Files

Buzzzz

<h2>Desk Name Plates</h2>&nbsp;Select one of the four holder to print and build your own name plate using Makerworld MakeMySign <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/en/makerlab/makeMySign</a><ol><li>50 x 250 mm</li><li>50 x 200 mm</li><li>50 x 150 mm</li><li>Vertical 50 x 200mm</li></ol>Plate tickness 1 mm&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/420863/2024-01-14_f752e6481963f8.png"></figure><figure class="image image_resized" style="width:23.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/420863/2024-01-14_2dab352ffd9eb.png"></figure>&nbsp;

Desk Name Plates

personalized

I3ddruckmarc

This is the Bambu Lab lithophane frame. I cut off the top and added connectors (in Bambu Studio) for a easier print with less support. I also removed the Bambu Lab lettering to lay the top flat on the build plate.Use some glue and put the pieces together.

Bambu Lab lithophane frame - less support

Lithophane box

Foxart

I reverse engineered the filament swatches that come with the A1 mini from pictures from youtube video's.&nbsp;They are an perfect fit with the “Swatch Display Board” by Bambu Lab: <a target="_blank" href="https://makerworld.com/en/models/14863#profileId-14645" rel="nofollow noopener">https://makerworld.com/en/models/14863#profileId-14645</a>&nbsp;I also made a version with PRUSAMENT, POLYMAKER,REPRAPWORLD and SUNLU on the back (printing with a smaller nozzle is recommend for these)&nbsp;Special Thanks to Bryan Vines for the clear video of these and the temporary cover photo!Check him out he's great: <a target="_blank" href="https://www.youtube.com/@BV3D" rel="nofollow noopener">https://www.youtube.com/@BV3D</a>&nbsp;Enjoy!

Bambu Lab filament swatches

Filament Sample

ARTICAT

Check out another amazing addition to your kitchen, PEPPER SEED REMOVER:<a target="_blank" href="https://makerworld.com/en/models/143388#profileId-155917" rel="nofollow noopener">https://makerworld.com/en/models/143388#profileId-155917</a>&nbsp;&nbsp;Summary:Elevate your kitchen organization with our 3D printed Kitchen Utensil Holder.This versatile stand is designed to elegantly hold wooden spoons, cooking utensils, and even hot pot lids, bringing both style and functionality to your culinary space.&nbsp;Features:Multi-Functional Design: Accommodates various kitchen tools and pot lids.Stylish and Durable: Enhances your kitchen decor while providing a durable solution.Easy Access: Keep essential utensils within reach for seamless cooking.&nbsp;Transform your cooking experience with this practical and chic Kitchen Utensil Holder - where form meets function! 💡🍳✨

Kitchen Utensil Holder

Kitchen

vajcnerd

CARS Offroad HUMMER H1, easyprint, with suspension! Print from PLA, the body is connected by pins and glue. Put the supports in the space for the axle of the wheels. Help photo in the gallery! NO SUPPORT!NEW version 2024 added filler neck, body interior recess

Earrings

Yarn Bowl

make up Organizer

Coasters, Trays, Bowls

Garden

Storage Bins

P1S

A1 files

Keychain

Brett

Crocks

Crate

ams stand

Mandala

Cup

Garden

Helper files

Animals

Jewelry

x1c

Fidget

Filament Helper Files

personalized

Lithophane box

Filament Sample

Kitchen

Vehicle Toy Model