yiak65

小宇宙

这个钢琴只能配合任天堂SWITCH游戏机和LABO游戏卡带使用，本身不具有发音功能。This piano can only be used with Nintendo Switch and LABO game cartridges. it does not have the ability to pronounce itself.&nbsp;部分零件较大，A1mini摆不下。A1mini可以尝试在切片软件中将零件切成两部分，打印完成后使用胶水粘接。我没有这样试过，可能会因为贴合有缝隙粘不紧。Some parts are out of the A1mini size.The A1mini can try to cut large parts into two parts in the slicing software and glue them together after printing. I haven&#39;t tried this way, and it may not be successful because of a gap in the fit.&nbsp;白键建议使用50%填充，其他零件使用0.2mm默认配置即可It is recommended to use 50% filling for white keys, and 0.2mm default configuration for other parts is sufficient.&nbsp;下图部分用胶水粘接，其他零件不建议使用胶水。注意joy-con插槽的方向。The parts in the image below are glued together, and glue is not recommended for other parts.Pay attention to the direction of the joy-con slot.&nbsp;<img class="image_resized" style="width: 44.04%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_0eae338dd7f65.png"><img class="image_resized" style="width: 30.69%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-17_a30503ac9637d.png">  需要用到如下配件：The following accessories are required.&nbsp;&nbsp;1.反光贴纸(最好是任天堂LABO原装的，非原装的要买亮度高点的，否则可能不起作用)Reflective stickers (preferably Nintendo LABO original, non-original ones should be bought with high brightness, otherwise it may not work)&nbsp;<img class="image_resized" style="width: 30.73%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_217abfc5a2efe.jpg"><img class="image_resized" style="width: 23.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_7e2caf696ab83.png"><img class="image_resized" style="width: 24.01%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_f942c663aaec3.png">&nbsp;键盘背后和旋钮有凹槽示意贴纸位置There are grooves on the back of the keyboard and knobs to indicate the position of the sticker<img class="image_resized" style="width: 34.9%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_cb9f440ddabbd.png"><img class="image_resized" style="width: 34.52%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_f601248b37b2d.jpg">&nbsp;琴键背后的贴纸需要在游戏中根据使用效果调整位置。例如，你按下3却触发了4，则需要将3的贴纸位置往左调。The stickers on the back of the keys need to be adjusted in-game to match the effects of use. For example, if pressing 3 triggers 4, you need to adjust the position of the sticker of 3 to the left.  <img class="image_resized" style="width: 66.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_f5a9db52471a1.png">&nbsp;2.橡皮筋4条4 rubber bands&nbsp;<img class="image_resized" style="width: 23.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_5812f12c153ee.jpg"><img class="image_resized" style="width: 40.7%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_a00a54dc93dcd.jpg"><img class="image_resized" style="width: 54.43%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-17_509c73b71a272.png">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;3.海绵胶带（它的作用是消除按键时的摩擦声）Sponge tape (it works to eliminate the friction sound when the keys are pressed)<img class="image_resized" style="width: 31.04%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_f707ad971a1d3.png"><img class="image_resized" style="width: 49.34%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_48ac1f48c0219.png"><img class="image_resized" style="width: 57.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_6e4fb0ee2aece.png">&nbsp;白键全部要贴海绵，黑键不需要。All white keys should be sponge taped, black keys are not. <img class="image_resized" style="width: 30.37%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000498257/design/2024-06-16_3cff3c65f62f1.png">&nbsp;&nbsp;

SWITCH LABO钢琴1.0-Nintendo switch LABO piano Ver1.0

LABO

3D Print Masters Hub

<ul><li>220mm Long Metric Ruler for A1 Mini and Larger Bed Size</li><li>Two versions, one with no color and the other with two colors assigned. Assign colors to your preference.</li><li>Easy print and great printer accessory!</li><li>Recommend using Bambu Lab PLA and dark color for the top layer to prevent color bleeding.</li><li>Please like and subscribe! More to come!</li><li>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥</li></ul>

220mm Long Metric Ruler For A1 Mini and Larger Bed Size

Mesure

DetlefGrohs

This is a project created from <a target="_blank" href="https://www.thingiverse.com/thing:4463812" rel="nofollow noopener">D&D Dice Set (Multi-Material Included) by nickr138 - Thingiverse</a>. It has the same license as the original files. I have simply organized it for 2 color printing.

Dice Set 2 Color

Dice

shamrockwood315

One of my many laser-cut heart designs that I converted to 3d print. These are pretty cool and folks seem to enjoy them

HEARTS

Gifts

A1 Printer Simple Waste Poop Bucket<ul><li>Slim walls</li><li>Simple print</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥&nbsp;

A1 Printer Simple Waste Poop Bucket

Printer Mods

schuleit

Beautiful and stable support stand for the Meta Quest 3 and the controllers when not in use. &nbsp;Design and model creator is <a target="_blank" href="https://www.thingiverse.com/roberto_makerbot/designs" rel="nofollow noopener">Roberto Rosa</a> - full credit and all attribution for designing this amazing stand for the Meta Quest 3 stand goes to the creator. Stand also works beautifully with the Meta Quest 2 headset (see included pictures) but respecting the original design Q3 is embedded in the model.&nbsp;The reason why I am sharing the model is here is because I was not able to print the model in one piece, therefore, I had to split the model in two pieces and to ease reassembly I included a dovetail. Bambu Studio print profile included.&nbsp;The model is reshared without any modifications from the original model except for the dovetail split enabling the print to fit on a bambu lab build plate and for easy reassembly to the intended original design.&nbsp;As it turned out it is a snug fit and no glue was needed for reassembly. Printed in PLA and supports needed for dovetail overhang - printed with brim to prevent warping.&nbsp;Timelaps recording of the dovetail piece with overhang:<figure class="media"><oembed url="https://youtu.be/GDi511OssYo"></oembed></figure>Two piece SLT included.&nbsp;For the original model STL in one piece please go to the Creator´s original model here: <a target="_blank" href="https://www.thingiverse.com/thing:6347987" rel="nofollow noopener">Thingiverse</a>

Meta Quest 2/3 Stand

Good Ideas

8BitTitan

BE SURE YOUR PRINT PLATE IS CLEAN! Poor adhesion will give you a spaghetti dragon…&nbsp;We know why you&#39;re here. You want an articulated dragon. You want the longest one you can make without subscribing to a Pateron or having to do funky coil stacking (don&#39;t ask…) Well, you&#39;re in the right place! With a little patience (a lot of patience), this 60&#34; beautiful articulated bone dragon can be yours along with those bragging rights!&nbsp;Also unique to this variant are the rounded edges, making it a tad safer for those young fellows that tend to swing things around.&nbsp;The print is optimized for infill, speed and walls. NOT suggested to go any quicker – let your printer create something amazing for you in time. When you&#39;re committing almost 280g of filament on the big guy, let&#39;s be sure it comes out right.&nbsp;Also included are shorter variants for those that are in a time crunch. &nbsp;IMPORTANT: It is STRONGLY recommended to print the 3-segment dragon to be sure your printer is dialed in before committing to the long ones.

LABO

Mesure

Dice

Gifts

Printer Mods

Good Ideas

Dragons