夜幕six

Jerryie

&nbsp;&nbsp;This set includes screws, nuts and washers of all kindsISO 4017 DIN 933&nbsp;With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5&nbsp;&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_69ea780efc7e4.png"></figure>&nbsp;<figure class="image image_resized" style="width:25.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_379d07fbbf734.png"></figure>&nbsp;&nbsp;The screws are optimized for easy twisting, but if there is a problem with any type, write it in the comments and I will fix it I tested it from PLA and they worked fine&nbsp;NO SUPPORT!&nbsp;&nbsp; There is a bonus in files for people who often lose their extension :)

Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017

工具

Eagle_92

<h4>Summary</h4>This is a fan-made model of the famous iron helmet from the Bethesda video game: TES V: skyrim.  We shaped the various details of the helm following the ones on the textures and on the normal maps in the game.  The helmet is shaped for a relatively large head, we invite you to follow this table to re-scale it according to your needs.  (NOTE: These values are only indicative, we invite you to take the measurements on yourself and scale it as needed). 94% = Small 97% = Medium 100% = Wide 103% = Extra Large&nbsp;Have a good printing time! By ilcorsaro92 from GliArtigianiDiAvalon Post-PrintingHOW TO COLOR:&nbsp;Just give a tick layer of Black plastic primer, then a Spray Chrome layer. Leave it Dry. Next day give a layer of dark metal spray. Once dried, you can scratch the dark color revealing the chrome from the previous layer. If you wish, you can put some rust in little spot around the rivets or the eyes.&nbsp;For the horns, use at least 3 different shades of sand.&nbsp;We suggest you to darken areas were 2 or more part are close together, in order to recreate a sort of Ambient Occlusion (use dry brush technique or airbrush).&nbsp;Final: Use a Clear Glossy transparent acrylic spray all over the helmet, leaving the horns matte.&nbsp;

Skyrim Iron Helm

面具

EhRabz

Recommend printing in clear PLA so the LED's will shine through , used 5mm ( 3/16" ) steel rods for recinforcement , and the switch to turn lights on / off is built INTO the hilt with magents ( magnets are the contacts )

工具

面具

武器