yeiyiyei

krapouere

Hello, I created this fishing reel a couple of years ago. This fishing reel is aimed to be use with the trout fishing technique called “TOC fishing”&nbsp;Because my english is crap, here a quick comprehensible explanation of what the TOC fishing is (<a target="_blank" href="https://comptoirdespecheurs.com/peche-en-mer/7775-Toc-fishing" rel="nofollow noopener">link of the source</a>) :<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000471023/design/2024-05-21_3a069b2c27ea5.png">&nbsp;As the reel is only a reserve of line for the fishing, no need to add brakes and complicated stuff.&nbsp;Here a video I made :<a target="_blank" href="https://youtu.be/7kuYB_0Mzwo" rel="nofollow noopener">https://youtu.be/7kuYB_0Mzwo</a>&nbsp;&nbsp;Details :<ul><li>The most important thing (because the rod could be long and heavy), it&#39;s only weight 45g !</li><li>The two faces are assembled with the axis and some glue.</li><li>I added two holes ont the body to put two plastic ties, in the case of you haven&#39;t the two rings on your rod.</li><li>The red thing are chenille stem (like on the old french reels), to avoid the line go out of the reel (that could happen).</li><li>The bearing is a 10x4x4 pushed in force in the plastic body.</li></ul>&nbsp;Non-3d printed parts you will need :<ul><li>Bearing 10x4x4</li><li>Screw M4x30 (for the middle axis)</li><li>Nut Nyloc M4</li><li>Screw M3x25 (for the handle)</li><li>Nut M3</li></ul>&nbsp;When I designed this reel I had an old printing machine, so the design may appear not optimised. I think I will re-design it soon since I now have a very precise 3d printer (A1) !

Fishing Reel

Fishing Rod

Dr.Mussy

<h3>Don&#39;t forget to &#34;Click A Like&#34; &amp; check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, PLZ leave a comment what you want next!</h3>V2 is out all the issues fixed  https://www.thingiverse.com/thing:6669713  ACCESSORIES: <a target="_blank" href="https://makerworld.com/en/models/481073#profileId-392736" rel="nofollow noopener">https://makerworld.com/en/models/481073#profileId-392736</a>  -Mongolian Style Release <a target="_blank" href="https://makerworld.com/en/models/486891#profileId-399732" rel="nofollow noopener">https://makerworld.com/en/models/486891#profileId-399732</a> -XBow Sight by Durbanpoisonpew<a target="_blank" href="https://makerworld.com/en/models/490905" rel="nofollow noopener">https://makerworld.com/en/models/490905</a> - Broadhead Organizer (X-Bow Accessories)<a target="_blank" href="https://www.thingiverse.com/thing:2695878/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2695878/files</a> -Fishing Accessories&nbsp;This was requested by one of my followers, its &#34;still in the works&#34; because i wanted a professional archer to give it a go and give me feedback on how well it works as I&#39;m no expert and I only shoot bows for fun.Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn&#39;t affect shooting much so you can def get away with just solid pulley.Print Settings: 25% infill 8 walls on most parts except the pulley, Band Mounts &amp; WB which I used 12 to make sure it does not flex Supports only for the frame, NO Brim or Raft required, Long and easy print ;)BOM: Pully: M6 60mmL Furniture screw x2Optional Flanged Bearings x4 (F696zz)Grips: M3 12mm L x2 3mm 22mm L x2Rubber Holders: M5 30mm L x2Band Aligners: 3mm 14mm L x4 pinsP Rail: M3 20mm L x1Attachments/Accessories: M6 40mmL Furniture screw + Barrel nut (Some require more than one set)Fishing Reel: Winding Handle M6 60mmL Furniture screwSpool M6 60mmL hex screw + Lock Nut Bands cut 50mm from each end to give you the equivalent of a 30lb bow at 28&#34; draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L... <a target="_blank" href="https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html" rel="nofollow noopener">https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html</a>VIDEOS: <figure class="media"><oembed url="https://www.youtube.com/shorts/coq2-F3OdlM"></oembed></figure><figure class="media"><oembed url="https://www.youtube.com/shorts/lVDLl8R8F2E"></oembed></figure>If you are interested in other prop firearms, Airsoft parts and designs or need help with the build then do join our group on Matrix: <a target="_blank" href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow noopener">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I&#39;m always open for suggestion and help on improving the design and proof of concept.!Don&#39;t forget to hit the LIKE! &amp; check out my other Cool designs &amp; Follow my Weekly dose of KooKoo uploads ;)

Survival X-Bow

X Bow

风暴手作

原创3d打印弹射刀，首次发布于2023年8月

弹射刀

knife

3d_printall

Easy to print Ping Pong paddle, designed with regular professional paddle dimensions. I suggest to use PLA and TPU for better results. The paddle works really well! To glue all parts I used biadhesive papers like this one: <a target="_blank" href="https://amzn.to/3xnCJ4p" rel="nofollow noopener">https://amzn.to/3xnCJ4p</a> Check my video here: https://www.instagram.com/reel/C5Y3wbnLsEZ/

Fully 3D Printable Ping Pong Paddle

pingpong

Super_Laserkatz

Die Sonne brennt, deshalb wollte ich ein Sonnensegel spannen, habe aber letztes Jahr die Spannschlösser leider besonders gut weggelegt :D.Darum habe ich mich entschlossen schnell eins zu konstruieren. Mein Ziel war es ein stabiles Spannschloss herzustellen, das mich mit 80kg tragen könnte und damit sicher auch ein Sonnensegel befestigen kann. Gedruckt habe ich aus festigkeitstechnischen Gründen mit 4 Outlines, 40% Infill und ohne Support. Die Haken sind jeweils mit Rechts- und Linksgewinde und stehen in einer leichten und schweren Fassung zum Download. Die schwere Fassung konnte mein Gewicht tragen… die leichte nicht ;) (40kg schafft sie aber auf jedenfall)Für Witterungsbeständigkeit ABS oder ASA nehmen. Getestet habe ich mit PLA.Viel Spaß beim drucken!

Spannschloss für Sonnensegel, turnbuckle

hook

Greg171

These 3D printed clips allow you to easily organize model kit sprues and save table space. Attach the clip onto the sprue (near a corner or the middle) and then place anywhere on the table. The clips will stay on the sprue when you pick it up to cut a part out.Designed with Gundam model kits in mind, though it should work with other model kits.If the sprue is too thin, simply add some tape to the sprue to make it thicker. Model masking tape works well. If the sprue is too thick, shave it down with a hobby knife. If the sprue is unstable when standing up add a second clip to improve stability.

Model Kit Sprue Clip

MODEL

mouse

shinobu

These are clips for attach you vision pro to your cap.<ol><li>take off you light shield</li><li>attach clips at the visor of your cap.</li><li>attach clips to your Apple Vision pro.</li><li>and attach light shield</li></ol>

Vision Pro Cap Clip

vision pro

YeetYeet

Break action rocket launcher that shoots rockets propelled by co2 cartridges. Rockets are held in reusable shells and upon firing, they deploy stabilization fins thanks to rubber bands. The rockets use 12g co2 cartridges which are often used for airsoft. That makes them quite affordable and available in any airsoft store. Launcher features picatinny rails on top and bottom of the barrel, making it possible to mount accessories like scope or laser. For more information and assembly guide see assembly.pdf in files.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=DbaiUHjH5wk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/DbaiUHjH5wk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> BOM:<ul><li>M3x8 7pcs</li><li>M3x60 2pcs</li><li>M3x35 2pcs</li><li>M3x25 1pc</li><li>M3x22 1pc</li><li>M4x25 1pc</li><li>M4x22 1pc</li><li>M4x10 4pcs</li><li>M4 nut</li><li>Springs 5,5mm OD, length at least 30mm (<a target="_blank" href="https://www.hornbach.cz/p/pruzina-tlacna-5-5x38-zinek-bily-baleni-8-ks/6488171/" rel="nofollow noopener">Springs from HORNBACH</a>)</li><li>Torsion spring - wire diameter: ~2.5mm, inner hole diameter: 8mm, outer diameter: 13.5mm, height: ~13mm (I got mine from <a target="_blank" href="https://www.globus.cz/cela-nabidka/produkt-01012794000" rel="nofollow noopener">this clamp</a>)</li><li>Nail 2.8mm x 40 (<a target="_blank" href="https://www.hornbach.cz/p/hrebik-do-krytiny-2-8x40-bez-pu-2-5-kg/8718694/" rel="nofollow noopener">HORNBACH link</a>)</li><li>12gram non threaded co2 cartridges</li><li>rubber bands  </li></ul>For additional types of rockets or if you want to create your own see <a target="_blank" href="https://www.printables.com/model/766344-co2-rockets" rel="nofollow noopener">Co2 rockets</a> (<a target="_blank" href="https://makerworld.com/en/models/188133" rel="nofollow noopener">Makerworld link</a>) In the files section you can find honing tool. This is not needed but can be used to smoothen the inside of the barrel. Simply glue sandpaper to it and insert 8mm tube into the center. Mount it onto a drill and use it to smoothen the barrel. UPDATE: Added shorter 167mm barrel so it can be printed on prusa mini or A1 mini. Thanks to <a target="_blank" href="https://makerworld.com/en/u/335516679" rel="nofollow noopener">@Ice_Maniac</a>, who found the correct set of springs and clamps on amazon: <a target="_blank" href="https://www.amazon.co.uk/dp/B0BWY3TY1K?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Clamps from amazon</a> <a target="_blank" href="https://www.amazon.co.uk/dp/B00W93X2IS?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Springs from amazon</a>

Co2 rocket/grenade launcher

cole

Simple tray with raised letters. Hope you enjoy! AMS ready 3 color.

1lego tray

lego

SmarTiks

Articulated Dragon model made by P1lotz at https://www.printables.com/fr/model/331094-articulated-christmas-dragon

Articulated Christmas Dragon

dragon

Stag 3D

<h2>Wicked Witch of the East Bookmark</h2>Attention all bookworms, add some fun to your book with this novelty Wizard of Oz bookmark. &nbsp;Nice simple print requiring minimal assembly and no supports. Simply place the shoes over the legs with a dab of glue and push fit the legs onto the main holder. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779574/2024-02-27_7b855f06b1fb9.png"></figure>&nbsp;

Wicked Witch Bookmark

Bookmark

Gogole

*I am not the author of this masterpiece.I had the original model printed but after 24 hours of printing I saw that some areas were not the right color. So I checked and corrected everything.I also enlarged it a little.&nbsp;No support needed.AMS required.&nbsp;Colors used:Rock: BambuLab Matte Black Charcoalwalls: Ziro Matte woodRoof: Sunlu grayLogo: BambuLab Silk Gold

Harry Potter Hogwarts corrected colors

Harry Porter

agepbiz

Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=izAVVtEN4ik"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/izAVVtEN4ik" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.*edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue)Both the excavator and the egg was each designed to be printed in place without any support structures. The excavator has rotatable wheels, liftable arm and articulated bucket and rotatable body. The egg is hinged<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a> WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>Rafts: NoSupports: NoResolution: 0,1Infill: 40%Notes:3 shells

Surprise Egg #4 - Tiny Excavator

crabstiks

A fridge magnet / Christmas tree ornament design based on Mjolnir, Thors hammer from the marvel avengers movies. It needs 2 magnets 8mm diameter by 4mm deep, the print needs to be paused to insert these inside the model for the fridge magnet. For the Christmas tree ornament it just needs some cotten tying through the handle. Of course you can always do both and use it as a fridge magnet when it's not Christmas. The model is split into objects to allow easy selection of colours in Bambu Studio, if you want a much faster print but with less detail choose the same colour for the handle as the trim, this will result in a solid brown (or whatever colour you choose) handle without the silver bands.

Mjolnir Thors hammer fridge magnet / Christmas tree ornament

Bridge magnetic

Chaoge inventor

需要韧性好的材料Need materials with good toughness首层厚度0.1mm需要先调试好机器The first layer thickness is 0.1mm, and the machine needs to be debugged first使用光面打印板Using a smooth board各零件之间用胶水粘接Glue the parts together&nbsp;

Tetrahedral Kites 四面体风筝

风筝

Hatta_3d

***NEW UPDATE***After numerous requests received in recent weeks, i have inserted a new print profile dividing everything into single parts and adding 2 new print plates to split the black and white parts.IF YOU LIKE IT SUPPORT ME WITH A NICE BOOST.&nbsp;This is a replica of the famous Gundam RX78-2.I recommend printing it using the pre-set profile.Please follow the instructions in the attached manual.Instructions identical to the original model.

Gundam RX 78-2.  1/144 Entry Grade (test replica)

gundam

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

lamp

Codyinbody3

I recently designed a multicolor wall mount for my Chiefs and Thor's Hammer. The ones I saw on all the other sites were not long enough out from the wall or were too thin and had nothing to keep it from coming off the front in case of an accident. So I decided I'll make one myself and I think this one turned out pretty good. It fits the hammer I made perfectly and I also made different versions which you'll see in the 3mf. There's a small, medium, and large wall mount for power tools, hand tools, yard & garden tools. I designed it to take just about any drywall screw, now on the smaller one, it takes a smaller diameter screw but will still hold up perfectly. I plan on making more little useful prints like these in the future to go with all the other things I've made to diversify my model. Enjoy!

(No Supports) Tool/Thors Hammer Wall Mount (Multiple Versions)

sand tool

娄见桦

fast turbo funnel漏斗

funnel

Creatività in 3D

<h2>THE BIG REAL HAND</h2> Large Hand created with Revo 3D scanner. The model has a large hand but can be scaled at will. To make the hand more realistic I recommend printing it with this PLA <a target="_blank" href="https://amzn.eu/d/6iMbu7o" rel="nofollow noopener">https://amzn.eu/d/6iMbu7o</a> or a skin-colored PLA.The result is fantastic as you can see from this photo&nbsp;<figure class="image image_resized" style="width:24.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-03-12_cb57ef6b16293.jpg"></figure>Update:User RodT created a wall mount for the hand. You can find it in the press profiles.Personally tested, it fits perfectly in the hand to hang on the wall. (Unscaled hand)<figure class="image image_resized" style="width:22.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-14_4294a6656e61.webp"></figure><figure class="image image_resized" style="width:21.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-14_3662ae8e7bc1b.webp"></figure><figure class="image image_resized" style="width:20.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/858344/2024-04-15_67b8474c8b6a5.jpg"></figure>&nbsp;ENJOY

Real Big Hand

hand

Stampj

Funny tire cap, fits the Shrader valves of our car tires. I recommend using ASA, ABS, PETG or PLA+ only in case you want to prank your favorite friend.

Funny Tyre Cap

tire cap

BlkWgn

This is a remix of a few different designs that I put together to give you a complete package.&nbsp;The main item is a rugged box with inserts from PjotrStrog, you can find the original <a target="_blank" href="https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2" rel="nofollow noopener">here</a>&nbsp;The Hot Iron Stand is from Termiman, you can find it <a target="_blank" href="https://www.printables.com/model/237958-ts100-pinecil-ts80-ts80p-case-with-options-stand-s" rel="nofollow noopener">here</a>. This will need a single 608 bearing, this is an affiliate link to the ones I use on Amazon, but any 608 bearing should work. This is a 20-pack and was less than $9 when I bought them. <a target="_blank" href="https://amzn.to/41FukEs" rel="nofollow noopener">https://amzn.to/41FukEs</a>. It also has a spot for an M3 screw and nut, but mine works fine without it. If you want to put a screw in it, this is the M3 screw set I use <a target="_blank" href="https://amzn.to/3RLf6Js" rel="nofollow noopener">https://amzn.to/3RLf6Js</a>&nbsp;To save screws on the case, and because it is just more fun I used a file from xander to print pins, making the case itself fully 3d printable.&nbsp;I printed the entire setup in PETG on 2 plates. Separated by color to save on color changes. There is an optional 3rd plate with a gasket printed in TPU, I used <a target="_blank" href="https://amzn.to/3H5wG6h" rel="nofollow noopener">Overture High-Speed</a>&nbsp;This also includes the solder spool (2 piece) but I am not super thrilled with it so I am going to look for or model an alternative.&nbsp;The box and accessories was done on a textured plate, and the TPU gasket on the engineering plate&nbsp;

Pinecil Soldering Iron Rugged Case w/ Stand and Spool - No screws needed fully printable

Solder stand

Josh-3D

Check out the other two games I&#39;ve made in this series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/128570#profileId-139240" rel="nofollow noopener">TicTacToe</a>&nbsp;A Travel Chess Game! The follow up to my Tic Tac Toe game. Tic Tac toe is a pretty fun little game, but I think most of us advance past it once we&#39;re out of our kid years. For those wanting a little more, I present Chess! Travel Edition!&nbsp;It&#39;s setup so you can take the board on the go, even mid game if that&#39;s the situation you need to handle. I added a few little notches to help keep the lid secure, but just to be safe and sound, I&#39;ve included a strap much like that made by <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>on the TicTacToe game. The strap comes in two flavors, depending on how you feel. There&#39;s a 2 color version, and a single color version for those that want something a little simpler, faster to print.&nbsp;Enjoy!&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Chess - Travel Edition

chess

E.T.

<h2>Airless Ping Ball 3.0!</h2>&nbsp;New mesh, new strength.&nbsp;Prints with a 3 layer raft for ease of adhesion and easy support removal!&nbsp;While this ball is a little heavy for table tennis, it DOES work (slams not guaranteed). Other uses include: Works as a fantastic cat toy if you toss a bell in at 60% print completion (or by itself).&nbsp;If you wish to sell this commercially, look <a target="_blank" href="https://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0" rel="nofollow noopener">here</a>&nbsp;Thanks!

Airless Ping Pong Ball 3.0

ball

lovelowpoly

Pla 0.2mmCan be attached with double-sided tape&nbsp;

Wall Flower Pot

flower van

<h2>THE FLY</h2><figure class="image image_resized" style="width:33.3%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429296/design/2024-04-15_5e37d25e671f6.png"></figure><h2>******UPDATE PRINT PROFILE V2******</h2>New, more reliable printing profile released for everyone. Updated orientation and supports, easy removal always with delicacy.Fixed some issues2 minutes fasterPrint with the updated profile&nbsp;<figure class="image image_resized" style="width:20.35%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429296/design/2024-04-17_d3d1dd9d2e251.jpg"></figure><figure class="image image_resized" style="width:19.48%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429296/design/2024-04-17_26076bf1fa7ab.jpg"></figure><figure class="image image_resized" style="width:19.04%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000429296/design/2024-04-17_d9791d54c7bb9.jpg"></figure>&nbsp;Fly to be printed with 0.2 nozzle, the total length of the fly is 23 mm. Remove the paw supports gently &nbsp;Enjoy

The Fly 

虫子

Gcod3D

Reproduction of F 16-c. This is a multi-role aircraft with a maximum reachable altitude of around 15,000 metres. It has been chosen by the air forces of 25 nations[4]. The F-16 is the largest Western fighter aircraft project, with over 4,500 examples built since production began in 1976[4]. Although it is no longer purchased by the US Air Force, newer versions of it are still produced for the foreign market. In 1993, General Dynamics sold its entire aircraft manufacturing business to Lockheed Corporation[5] which then became Lockheed Martin after its merger with Martin Marietta in 1995.&nbsp;Note: use only this settings. This model needs post production and glue.

F 16-c

模型

toilet

The3DHobbyist

After making some other “airless” models, a commenter on one of my Tik Toks said he wanted to see an airless disc golf disc….it was so absurd that it needed to exist. After some time, this is what I came up with. It isn't perfect but I think I achieved my end goal of it looking like it belongs in a disc golf bag. Printing:<ul><li>Model is already oriented in the correct way for printing (brim up laying on it's face)</li><li>Recommend to clean build plate well before attempting print as there are several small contact areas.</li><li>Have Arachne on</li><li>Standard print settings will work (2-3 walls with 15% ish infill will be fine) </li></ul>

Airless Frisbee

frisbee

ThePrintsGioUniverse

APEX 5' FRAME 

drone

tr3dcreations

Frame

frame

LutraVulgaris

Another one? yes, another one… BUT! this one has a slot to slide in a (printed) diffusor, or a piece of paperstrip cut to the right specs.<blockquote><ol><li>if you plan to use the gridfinity add on, you can print the file with gridfinity add-on, this houses some 6x2 magnets (they press fit but to be sure use a drop of glue)</li><li>if you plan to use the gridfinity add-on but still need more light? you can use the gridfinity add-on with extra LEDstrip, this houses some 6x2 magnets (they press fit but to be sure use a drop of glue) so you can use another ledstrip to house underneath the gridfinity part. this LED shines down on the buildplate and you can use the 24v AMS psu as a source. it also has a vutout on the front to house a 12mm push button</li></ol></blockquote>I made the LED riser to fit in 12mm WS2812b 5v strips but can easily house other ones ofcourse. you might want to use the 24v hack and using the PSU from bambulab itself.I printed with these settings:<ul><li>PLA 220/55 </li><li>layer height 0.2mm</li><li>walls 2</li><li>bottom 2</li><li>top 5</li><li>infill gyroid 15%</li><li>support automatic with top/bottom-Z on 0.1mm</li></ul>I also made a Gridfinity addon:<ul><li>made one with an option for an extra ledstrip accessible via a 12mm power button getting its power off the AMS 24v psu</li><li>all gridfinity files are in seperate files WITH or WITHOUT cutout in the bottom</li><li>magnets used is 6x2mm</li></ul>quite some support but I saw no chance of cutting the design in two pieces to avoid this.for the connectors, they are press fit with no tolerance. if you have trouble let me know.for the diffusor you can use plain paper or you can print the diffusor file, it is a 13.5mm wide strip that fits into a 14mm wide slot, if it is too tight you can cut a shimmer off using a ruler and exacto/utility knife. It is 0.3mm thick and needs to fit in a 0.4mm slot. I recommend these settings to secure a 3 layer piece:<ul><li>fine setting .12mm</li><li>first layer height 0.1mm</li></ul>this way you get 3 layers (0.34mm) making it sturdy enough to fit through and diffuse lightwhen sliding in the diffusorstrip: connect every connector except the front, you can slide the diffusorstrip in, when all are in you can cut the excess and close the last connector from the top!&nbsp;SEAL: I used a 2mm foam seal on the rim but you can also just print someting from TPU (file included) or use whatever you have on hand&nbsp;optional: there is an optional cable holder included, it houses a 5.5mm cable and screws on the back of the X1C with a m3x10 bolt&nbsp;<figure class="image image_resized" style="width:44.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/154203/2023-11-08_fa008e848cdc9.jpg"><figcaption>cable holder</figcaption></figure><figure class="image image_resized" style="width:43.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/154203/2023-11-08_99c75daa6f982.jpg"><figcaption>you can also use ziptie to the PTFE entrance</figcaption></figure>&nbsp;&nbsp;&nbsp;other questions, problems, design changes let me know!

X1C LED riser with (or not) diffusor and gridfinity!

ams tool

Buzzzz

8 different wall hooks in different size and sturdiness.&nbsp;

Wall hook

Regarnogal

simple sanding stick to rework printed parts much easier.added Bambu Logo to better fit the Maker World :D&nbsp;Need a sanding paper of1,5 cm width14 cm length<img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_ee343ecc90525.jpg">&nbsp;&nbsp;Also have a look on the bigger Version with 2,5 cm:<a target="_blank" href="https://makerworld.com/en/models/171216#profileId-187972" rel="nofollow noopener">Sanding Stick Bambu Style V2 (Big version) by Regarnogal - MakerWorld</a><img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_88f299a34118c.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_e96db8f2379a7.png">&nbsp;Details for this Version:tick_width_in_millimeter = 15 base_height_in_millimeter = 12 base_length_in_millimeter = 50 end_1_option = wedge end_1_height = base_height end_1_wedge_angle = 23 end_1_wedge_round_tip_diameter_in_millimeter = 2.0 end_2_option = round end_2_height = base_height end_2_wedge_angle = 10 end_2_wedge_round_tip_diameter_in_millimeter = 3.0 screw_thread_dia_in_millimeter = 6.0 screw_head_dia_in_millimeter = 12.0 screw_thread_hole_dia_in_millimeter = 6.4 screw_hole_dia_in_millimeter = 6.6 screw_head_space_in_millimeter = 15.0 screw_head_teeth = 8 extra_screw_head_height_in_millimeter = 0.0 max_thread_height_in_millimeter = 3.5

Sanding Stick Bambu Style

bearing

Emvi 3D

180° Print in Place hinges

Hinge

Celestin

You&#39;re tired of seeing your desk cluttered with 3D printing debris or various waste!&nbsp;The solution is here: a trash can that attaches directly to your desk. Simply slide it on, and your waste will now be confined to one place.&nbsp;It&#39;s as simple as that: you print it and screw it onto your desk. It can be adapted to desks up to 3.5 cm thick. I&#39;ve added a piece of TPU to ensure better grip under constraint.&nbsp;I made 2 versions of my trash can, one large which you can see in the photos with a height of 160 mm, and another smaller one with a height of 115 mm, for those with less filament and who want to print faster. (The assembly remains the same.)&nbsp;And there you have it, problem solved! With its large capacity, you won&#39;t need to empty it every day; it can hold a lot for a long time.&nbsp;IMPORTANT NOTE: There may be a slight lack of grip for the trash can to hold well. To remedy this, you can apply a bit of hot glue on the top of the trash can that is in contact with the table.  After several tries, I found that the best solution was to put the trash can under constraint with the TPU. To do this, you screw the trash can normally to the table, then you remove it and tighten it a bit more. This way, when you put the trash can back in place, it will be well secured and will hardly move at all. Good impression!

Desk trash bin

trash bin

lindh3d

I designed this to be printed without support and as one piece.It will take about 1kg of plastic and over 24 hours to print. But I think this is a super nice practical print to have at home or in the garden or when camping etc…&nbsp;Made a small update to my print-in-place portable stool. I also made an instruction video on how to open it up the correct way without breaking it or cutting it open.Perfect print to use up all those leftover spools with just a few grams of filament on.The weight limit is not tested to its full potential.My weight is 85kg and a friend of my have tested it and his weight is 90kg. No problem at all. I guess it will be able to withstand 120-150kg if you sit perfectly in the center and don't wiggle on it <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t80/1/16/1f92a.png">. It's a print-at-your-own-risk thing <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t83/1/16/1f60e.png">&nbsp;Rekommended printsettings:0.4 nozzle4 Parimiters0.16 layer height15-20% infill gyroid5 top/bottom layersSupport yes : Snug Support from build platePrint mode: Arachne&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/PND58IzI9xc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/PND58IzI9xc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/VZa5Ko11Rl0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/VZa5Ko11Rl0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;EDIT: 231003More pegs for more weight support.0.1mm z offset for rings. this will make them tighter at first when printing making for easier and successful print. But more force when using the stool the first time is needed.&nbsp;EDIT: 231005 Added an extra chamfer on the inside ring to be able to take more force when disassembling the first time.&nbsp;EDIT: 231022 Larger holes on the top and bottom part for larger fingers :)Removed support for holes, new design can now use regular snug support for the top holes&nbsp;EDIT: 231203 After requests, I have now made a smaller kids version. This will also fit the A1 mini printbed size.

Portable stool (twist an sit)

家具

Aoaobear

Sanxingdui (Chinese: 三星堆) stands as a significant archaeological site and a major representation of Bronze Age culture in modern Guanghan, Sichuan, China. Its discovery was largely made in 1986, following initial findings in 1927. Through excavations, archaeologists uncovered artifacts dating back to the twelfth–eleventh centuries BC, as determined by radiocarbon dating. This archaeological site serves as the type site for the Sanxingdui culture, attributed to the ancient kingdom of Shu. The artifacts excavated from Sanxingdui are now showcased in the Sanxingdui Museum near the city of Guanghan.&nbsp;Sanxingdui is included on the UNESCO list of tentative World Heritage Sites, alongside the Jinsha site and the tombs of boat-shaped coffins. The discovery of Sanxingdui challenges the conventional narrative suggesting that Chinese civilization originated solely from the central plains of the Yellow River. Some even speculate that the culture represented by the Sanxingdui ruins has extraterrestrial origins.&nbsp;In March 2021, over 500 artifacts were unearthed at the Sanxingdui site, located 4.6 square miles outside the provincial capital of Chengdu. Among these artifacts was a gold mask with a history spanning 3000 years. During excavation, archaeologists carefully removed a fragment of a bronze sacrificial vessel from Pit No. 3, revealing a severely deformed gold object. Initially resembling a crumpled piece of paper, the gold artifact's shape was difficult to discern. Restoration experts spent two weeks meticulously repairing the mask.&nbsp;Measuring 37.2 centimeters in width, 16.5 centimeters in height, and weighing approximately 100 grams, this gold mask features hollowed-out eye sockets, rounded ear contours, a prominent nose bridge, and a slightly open mouth. Its majestic and sacred appearance makes it the most intact gold mask unearthed during the Sanxingdui archaeological excavations to date.&nbsp;The unearthed objects exhibit unique shapes and superior techniques, confirming the extraordinary creativity of the ancient Shu people and their desire to connect with the heavens and understand the universe.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=TJknwAL8Dsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TJknwAL8Dsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<ul><li>There is more than one gold mask unearthed in Sanxingdui. They are all for reference when making models; <img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-07_3a8d84ded8f74.jpg"></li><li>The model is much smaller than the real thing. Real mask size: approximately 40cm wide x 28cm high;</li><li>In order to facilitate printing, low poly style is used;</li><li>Requires support (not complicated and easily removed);</li><li>In addition to the gold filament, the bronze color is also very good. Sanxingdui Bronze Mask:<img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-07_b8b01281ca1e.jpeg"></li></ul>We sincerely invite you to learn about China’s archaeological history and culture!&nbsp;<figure class="image image_resized" style="width:39.89%;"><a href="https://makerworld.com/en/models/242397" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/673058/2024-03-10_77e86713eb7fa.jpg"></a><figcaption>For other ancient Chinese cultural relics, click on the picture</figcaption></figure>

Sanxingdui gold mask  三星堆黄金面具

面具

t.schafer

A model of the queen elizibeth tower that i have created in sketchup. Model should not require any supports but use your own judgement regarding brims dependant upon your setup.

BIG BEN (Queen Elizibeth Tower)

建筑

LemonArts

My first 3D Scan Object from a Eye Glasses Nose Mouth Kiss Holder.Looks very cool. <figure class="image image_resized" style="width:72.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/777738/2024-03-28_ca46bfb3a8069.jpg"></figure>

Eye Glasses Holder Sculpture

stand

mikolaj.mazik

I present to you the result of 3 weeks of work, the Liebherr T284 mining dump truck, which is designed in a way that allows it to be printed entirely in 3D. This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct. Assembly instructions will appear within 2 days.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Liebherr T284 mining Dump Truck- Fully 3D printable (version without CAT excavator)

car toy

ikea

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

drinkware 

KYZ Design

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

storage

grecdel

Hi everyone&nbsp;This is my first contribution to makerworld.A Spiderman's portrait worked on HueForge.&nbsp;<ul><li>Bambu Lab Black to layer #5</li><li>Bambu Lab Red to layer #12</li><li>Bambu Lab Blue to layer #18</li><li>Bambu Lab White to layer #24</li></ul>&nbsp;Enjoy!

Spider man (HueForge)

hueforge

SmashD

If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! Slice it, print it, done.&nbsp;&nbsp;If you are not using the one-click printing method, or are not using a Bambu printer, read on:<h4>Print Instructions (manual settings):</h4>print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<h4>Filament Swaps:</h4><ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Fire Engine Red</li><li>At layer #15 (1.28mm) swap to Beige</li><li>At layer #24 (2mm) swap to White for the rest.</li></ul><h4> Filaments I've used:</h4><ul><li>Black: <a target="_blank" href="https://amzn.to/486FCDo" rel="nofollow noopener">Extrudr PLA NX2 matt schwarz</a>*</li><li>Fire Engine Red: <a target="_blank" href="https://amzn.to/42yHYtu" rel="nofollow noopener">PLA+ Esun Fire Engine Red</a>*</li><li>Beige: Bambu Lab PLA Basic “Beige”</li><li>White: <a target="_blank" href="https://amzn.to/4blLxaA" rel="nofollow noopener">Extrudr PLA NX2 matt weiß</a>*</li></ul>&nbsp;Notes:<ul><li>*The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)</li><li>I am not affiliated with the Coca Cola Company or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.</li></ul>

Coca Cola Coasters - Vintage (incl. Holder)

杯垫

Reclip

Collection of brackets and braces of different sizes and types.Designed for 4mm screws.&nbsp;Non-countersunk version here:<a target="_blank" href="https://makerworld.com/en/models/167900" rel="nofollow noopener">https://makerworld.com/en/models/167900</a>&nbsp;Print settings:layer height: 0.12-0.16 for max strenghtperimeters: maxsupports: no&nbsp;In case you're missing any type or size, please let me know and I will create a new model and add it to this collection.

Fishing Rod

X Bow

knife

pingpong

hook

MODEL

mouse

vision pro

gun

lego

dragon

Bookmark

Harry Porter

egg

Bridge magnetic

风筝

gundam

lamp

sand tool

funnel

hand

tire cap

Solder stand

chess

ball

flower van

虫子

模型

toilet

frisbee

drone

frame

ams tool

hook

sand tool

bearing

Hinge

trash bin

家具

面具

建筑

stand

car toy

ikea

drinkware

storage

hueforge

杯垫

function tools

3D