yanne

jkmayfield26

simple hook with screw coverstrong and reliablePrint in separate color for lots of fun looks&nbsp;

Wall Hook And Screw Cover

Casa

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

Plantas

hi_im_sean

Wall mount cat suspension bridge, for use with regular 550lb/4-6mm paracord. &nbsp;You should not need supports for any piece, print as oriented. Print very thick walls, PLA suggested to avoid warp. &nbsp;I highly suggest you screw at least 1 of the 3 landing screws into a stud (using a #6x2&#34; drywall screw), preferably the 2 in line and use a good drywall anchor for the 3rd. 8-9 rungs will span 1 set of 16&#34; studs, and it takes 17-18 rungs to span 2, or roughly 32&#34;. You can adjust the rung spacers height in slicer to fine tune the span distance. Find a pair of studs, mark them and test fit the assembled bridge before you drill any holes in your wall, adjust spacers and rungs as necessary. &nbsp;The drop rods snap into the rungs, refer to pictures for rope path. The bridge as pictured took about 1kg of filament, and 10ft of 4mm paracord.&nbsp;The cat step is designed to mount onto 1 stud and I do not suggest you use them at all with regular drywall anchors, maybe toggles on 5/8&#34; drywall, its your call depending on your chonker.

Cat suspension bridge and steps, wall mount

Gato

enricoRE

Joker LithophaneYou need 0.2 nozzle and 4 colors: CMYK Cyan Magenta Yellow WhitePrint at 100% infill with a layer height of 0.10 mm with a base layer of 0.15 mm

Joker Lithophane 0.2 nozzle CMYK

Diversos

designs.by.Marcum

The perfect way to bring your favorite wildlife species into your home!&nbsp;Wildlife Conservation is a topic that has been very near and dear to my heart since I was a small child, so it was only a matter of time for me to expand my Kit Card series to include various wildlife species. As the same with all of my others Kit Cards, these designs are simple and easy to print, but instantly recognizable as your favorite animal.<blockquote>In the universe are billions of galaxies, in our galaxy are billions of planets, but there is Only One Earth. It is important to remind ourselves that we only get one chance to protect and conserve the natural beauty of this world, and it is my absolute pleasure to bring awareness and life to some of the species that are most endangered of never being seen again.</blockquote>Current species included:<ul><li>African Forest Elephant</li><li>African Lion (Male and Female)</li><li>Dromedary Camel</li><li>Giant Panda (P)</li><li>Hippopotamus</li><li>Linnaeus&#39;s Two-Toed Sloth (P)</li><li>Llama (P)</li><li>Meerkat (P)</li><li>Mountain Gorilla</li><li>Polar Bear</li><li>Ring Tailed Lemur (P)</li><li>West African Giraffe</li><li>White Rhinoceros</li></ul>Animals above marked with “(P)” are located exclusively on Patreon, link below.&nbsp;The kit card connectors were designed to easily snap away, but for the cleanest finish it is recommended to use snips to remove them. Each animal may have a slightly different assembly, but the fundamentals remain the same amongst all of them.<ol><li>Snap all connectors to free each piece</li><li>Slide the ears into the cutout at the top of the head<ol><li>There are animals (such as the Lion and Gorilla) that use pegs and holes instead. For these you simply place the peg through the hole in the body and then squeeze the other side onto the peg.</li></ol></li><li>Slide the larger connector into the cutout at the front of the body</li><li>Slide the smaller connector into the cutout at the back of the body</li><li>Align to the two cutouts on the legs with the connectors and slide in</li><li>Repeat for the last leg</li><li>Enjoy!</li></ol>&nbsp;If you&#39;d like access to a Commercial License and exclusive designs not available anywhere else:<a target="_blank" href="https://patreon.com/designsbyMarcum" rel="nofollow noopener">Join me on Patreon</a>&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - Black</li><li>Overture Matte PLA - Light Gray</li><li>Overture Matte PLA - White</li><li>Overture Matte PLA - Light Brown</li><li>Overture Matte PLA - Chocolate</li><li>Overture Rock PLA - Rock White</li><li>Prusament PLA - Galaxy Black</li></ul>This community generated approximately $179 worth of points and boosts during the Animal Frenzy contest! On behalf of you all, I have donated $200 to the Fort Worth Zoo to assist in their conservation efforts. Thank you for all who took the time to show their love and support for my work.<blockquote><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447508/design/2024-05-26_df146c068f725.png"></blockquote>

Casa

Plantas

Gato

Diversos

Toys