yangjichao.1

潦草小狗爱吃雪糕

This is a mold for making spinning top from PLA filament purge. The tops made with this mold are very colorful and spin well. I printed the mold with PETG at 100% infill and did not need to use supports (PC might work even better).&nbsp;What you will need:<ul><li>An unused oven</li><li>A silicone mat (it&#39;s easier to flip and roll the melted PLA into a ball on a silicone mat than on a metal baking tray)</li><li>PLA filament purge</li><li>A 3M respirator or N95 mask (the fumes from melting PLA in the oven are stronger, so please protect yourself)</li><li>Work gloves</li><li>Tongs</li><li>Pliers</li><li>A digital scale</li></ul>Process：1. Accurately weigh 6g of PLA filament purge and place it in the oven.Preheat the oven to 200-230°C and heat the filament purge for approximately 5 minutes.2. Use tongs and pliers to shape the melted PLA into a ball. Evenly folded patterns will look better.3. Place the shaped plastic into the mold and press the mold firmly.4. After approximately 3 minutes, open the mold and remove the top. If the top is difficult to remove, use pliers to take it out.「Twisting and shaking the mold after it has cooled completely can aid in part release. I recently tried using a mold release agent (spray), and it has been very effective in ensuring smooth part separation.20240512」（translate from Google Gemini）&nbsp;&nbsp;这是一个使用PLA耗材废料制作陀螺的模具，制作出的陀螺颜色比较漂亮，旋转的很好。我用PETG 100%填充来打印模具，无需添加支撑（PC可能效果会更好）。&nbsp;你需要：一个闲置的烤箱，一个硅胶垫（需要把熔化的PLA翻折并团成一团，这在金属烤盘中很难操作），PLA耗材废料，3M防毒面具或N95口罩（在烤箱中熔化PLA产生的气味更大，请做好防护），工作手套，取盘夹，钳子，电子秤。&nbsp;压模步骤：&nbsp;1，将 6g（请准确称重）PLA耗材废料放入烤箱中，200～230℃加热约5分钟（烤箱需预热）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_df4dbe446d418.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_74bd4a7599ef7.jpg">&nbsp;&nbsp;2，用取盘夹和钳子把熔化的PLA团成一团（翻折均匀的纹理会更漂亮）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_31b36cc45d107.jpg"></figure>&nbsp;&nbsp;3，把团好的塑料放入模具中，用力挤压模具。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_75a96c8b0fc52.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_06f1d6fa28797.jpg"></figure>&nbsp;&nbsp;4，大约3分钟以后打开模具取出陀螺。如果脱模困难可以用钳子把陀螺取出。<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_07f0433aa2577.jpg">&nbsp;&nbsp;「充分冷却后扭转并晃动模具将有助于脱模。我最近尝试使用脱模剂（喷雾），它很有效，可以确保顺利脱模。20240512」&nbsp;

Spinning top mold   陀螺模具

废物利用

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

园艺摆件

DKprints

Land Rover Defender 110 model! This is a fairly high detail model of the old classic Land Rover Defender. Designed to be printed with 4 different colors in the AMS. Prints flat and press fits together after removal from the frame. Can either fasten together with an adhesive, or leave as a press fit model. Can cut the parts out with flush cutters or a hobby knife and assemble by referencing the pictures for the placement and orientation of the parts. Optional side mirrors can be glued on if you really want that scale look. Parts can be somewhat tough to fit, but once they're in place, the model is super strong. Happy Printing!

废物利用

园艺摆件

载具模型