Michas Technik Wiese

t.sladkowski

Da es mich irgendwann gestört hat, das die Babywanne oder der Sportsitz einfach auf dem Boden liegen oder Platz in einem Regal verschwenden, habe ich diese Wandhalterung konstruiert um beides an der Wand aufzuhängen. Gedruckt habe ich es aus ABS, sollte aber auch mit PLA oder PETG halten. Die Halterung ist extra angewinkelt damit man auch den Sportsitz aufhängen kann.  Viel Spaß damit :)&nbsp;Since it bothered me at some point that the baby bath or the sports seat simply lay on the floor or wasted space on a shelf, I designed this wall bracket to hang both on the wall. I printed it from ABS, but it should also hold up with PLA or PETG. The holder is specially angled so that you can also hang up the sports seat.  Have fun with it :)

ABC Design Wandhalterung

orga_children

WizPrint3D

Step into the world of nostalgia with this 3D model capturing the unforgettable moment of choosing your starter Pokémon in Pokémon Red/Blue. Relive the excitement of selecting between Bulbasaur, Charmander, and Squirtle as your first companion on your journey through the Kanto region. This wallart brings back all the feels of those childhood adventures, making it a must-have for any Pokémon fan!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Silver At layer #11 (0.96mm) swap to White At layer #17 (1.44mm) swap to Red for the rest. Optional frame included.&nbsp;If you want to support me and are interested in selling my models, please visit:&nbsp;<a target="_blank" href="https://www.patreon.com/WizPrint3D" rel="nofollow noopener">https://www.patreon.com/WizPrint3D</a>&nbsp;Check out my latest Pokemon Iconic Moments series models!&nbsp;<figure class="table" style="width:98.44%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/422650#profileId-325759" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-12_3c9ccd87edd34.jpg"></a></td><td><figure class="image image_resized" style="width:48.68%;"><a href="https://makerworld.com/en/models/419858#profileId-322546" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-12_23bebe8ce5939.jpg"></a></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/430719#profileId-335256" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-16_9c1b5c09c0523.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/430725#profileId-335261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/863180/2024-04-16_7d0521f4ccfeb.jpg"></a></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Pokemon Iconic Moments - Choose your starter

#to modelling

technic

Infinity 3D Prints

a cup marking station for eventsSome ca glue on the sides of the front plate does a great job on bonding them together . No need for a ton of glue . Less is more  :)

mark your cup and drink up station

party

The Big Greek

<h2>Holder 2x Tea Bag Dispenser</h2>&nbsp;I would like to introduce you to my Holder 2x Tea Bag Dispenser.At the request of the community, I have now made this holder available.&nbsp;This is an accessory for the <a target="_blank" href="https://makerworld.com/en/models/438146#profileId-343486" rel="nofollow noopener">Tea Bag Dispenser</a>&nbsp;Link: <a target="_blank" href="https://makerworld.com/en/models/438146#profileId-343486" rel="nofollow noopener">https://makerworld.com/en/models/438146#profileId-343486</a>&nbsp;<figure class="table" style="width: 786.094px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><h2>Tea Bag Dispenser</h2></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image image_resized" style="width: 145.938px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000464888/design/2024-04-23_0121766e1bc3e.jpg"></figure></td></tr></tbody></table></figure>&nbsp;The holder consists of a total of 2 parts, as everything cannot be printed in one go.&nbsp;Parts:<ol><li>1x holder</li><li>1x Insert</li></ol>&nbsp;On the upper side are recesses for the rubber stoppers of the dispenser, if you have installed any. There are also some on the back so that the holder has a proper stand.&nbsp;&nbsp;Assembly &nbsp;Insert the inserts, if this is a little difficult, place the holder with the inserts on the head and exert a little pressure on the holder. Then the inserts should sit well.&nbsp;NO AMS IS REQUIRED&nbsp;It works great for me. If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or buy me a Coffee</a></li></ul>This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.Have fun printingTBG&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000464888/design/2024-05-15_2998bd7b0e48b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000464888/design/2024-05-15_830799d80a3d9.jpg"></figure>

Holder 2x Tea Bag Dispenser

Household_kitchen

ENIQUE3D

a wall mountable bobble planter with clip in place drip tray&nbsp;this is printed in marble pla from ziro&nbsp;

Wall mounted bobble planter with drip tray

Plants

MatadorPrintor

Ran a couple of test prints to get a nice and easy model to place on cupcakes. A lot can fit on the buildplate in one go!&nbsp;Happy baking.

Simple 'Mama' cupcake topper, less than 1g 

Geschenke

Vetleprint

Note: This is the old version. you can find a new refined version here: https://makerworld.com/en/models/192429#profileId-212639&nbsp;Here is my attempt of making a Dremel tool holder. Hope someone else can make use of it too.The screw holes fits Biltema`s peg board.&nbsp;Support: yes.Infill: 20%.

Dremel tool holder ( old version )

Toolbox-Addons

Michael Teeuw

<div><h1>Summary</h1><div>A clip to mount a power strip below a desk (or similar).</div></div>

Power Strip Clip

Organize

Per Mejdal Rasmussen

Cable extension box using the WAGO 221 inline splicing connector.&nbsp;Benefits<ul><li>Compact.</li><li>Very strong strain relief.</li><li>Mountable with countersunk screws.</li></ul>How to make<ul><li>Print in PETG, because it is more fire retardant than ABS or PLA.</li><li>Insert WAGO 221-2401 or WAGO 221-2411 inline splicing connector.</li><li>Secure with M3 screws and nuts. Suggest screws are 14mm with hex head.</li></ul>If this model useful for you, please support me by clicking on the “Boost” button above.<ul><li>At 100 boots, I will make and release a model that can split the connection.</li></ul>&nbsp;Video:<figure class="media"><div data-oembed-url="https://youtu.be/SfNtMvaK5H4?si=KGLEgdQbKCcScEe7"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SfNtMvaK5H4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Extension box for WAGO 221 splicing connectors

Electro

mathiasdela

Introducing the PTFE Chain Clip— Organizing your cables with ease! Say goodbye to the frustration of the PTFE tube hitting the glass. Crafted from PETG material (minimum), this clip offers a simple yet effective solution to keep your cable neatly in place.&nbsp;Simply snap on the PTFE Chain Clip and enjoy. Upgrade your cable management game today with this convenient and reliable accessory!&nbsp;Needed one with a round top part. &nbsp;ENJOY!

PTFE Cable Chain Clip for X1C, P1S and P1P

P1S_PrinterUpdates

Jorge Rui

<h3>Introduction</h3>This organizer was designed with those, like me, who have limited space. It&#39;s a highly versatile and elegant system that allows for the storage of a wide variety of items. Not just for 3D printers, it can be used to store:<ul><li>Office supplies.</li><li>Small tools.</li><li>standardized elements such as screws, nuts, washers, metal inserts, helicoids.</li><li>and more. …</li></ul>Additionally, it can hold:<ul><li>batteries.</li><li>sewing materials.</li><li>diorama supplies, such as inks, brushes, and other material.</li></ul>These are just a few examples of what you can do with this model, which I&#39;ve decided to call &#39;Storage Tree&#39;.This will fo hand-in-hand with the already released <a target="_blank" href="https://www.printables.com/model/802516-prusa-mk25-to-mk4-flexible-steel-sheets-project-le" rel="nofollow noopener">PRUSA Mk2.5 to Mk4 Flexible steel sheets - Project Leaf</a> in a couple of days a Bambulab compatible version will be made available to all. More stuff will rollout very soon, I don&#39;t want to release all at once just in case something goes wrong (hope not).<h3> </h3><h4>Design Statement</h4>&#34;Tree Modular Storage System&#34; — where functionality meets elegance in a harmonious blend of industrial with some biophilic design influence.<blockquote>In the modern era where space is a premium commodity, our design ethos revolves around modularity, offering versatility to adapt to any living or working environment. Almost every module seamlessly integrates into the next, allowing for effortless customization tailored to your spatial needs.The Leaf Modular Storage System transcends mere utility, becoming a statement piece that enhances any room with its graceful presence.Crafted with precision and attention to detail, the system optimizes storage space without compromising on aesthetics. Every element is thoughtfully engineered to maximize efficiency, providing ample room for organization while maintaining a sleek and sophisticated appearance.</blockquote><h3>The project, Storage Tree</h3>Despite its simple appearance, this project presents some interesting technical details.<blockquote>The concept is based on a tree structure, with a strong and stable root that provides stability. The trunk is segmented so that it can grow as needed, then, we have the branches and leaves that can be aligned in any desired way. Like branches of a tree, they also contribute to balance, creating a complex yet harmonious system capable of accommodating numerous &#39;fruits,&#39; which are simply the things you wish to store.</blockquote>As it is a vertical storage system, it is compact. The leaves, when placed in staggered positions, can be covered with a lid, thus helping to protect whatever is inside from dust.<h3>Construction</h3>As previously mentioned, the concept behind the Storage Tree is to create a multi-layered storage system that develops vertically, thereby saving space. This design allows for a minimalist configuration with just the base and one &#34;leaf,&#34; but it also accommodates the addition of more &#34;leaves&#34; as needed.These can be arranged to maintain balance, or aligned as demonstrated in the example where three aligned leaves each have ample material, yet the structure remains stable...<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_3x981zc7qxy6.jpg"></figure>And a little clip to show an example of use.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=ejNGdXAN9wA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ejNGdXAN9wA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Printing process.</h3>The entire project was designed to make the printing of different elements simple, allowing them to be produced on all kinds of FDM printers, even those without multiple material feeding systems.In this project, no one is left out because I want everyone to be able to benefit from this modular system, which also serves as a gateway to the <a target="_blank" href="https://www.printables.com/model/583793-storage-rack-for-the-mmss" rel="nofollow noopener">MMSS</a> I developed a few months ago, which is so successful.For does who use Bambu Studio or Orca slicer, you only need a simple file (Storage Tree_Start.3mf) Band you are done (I hope Prusa Slicer implement multiple plates on their software, this really make things easier, and why not? Bambu Studio and Orca Slicer are branches for Prusa Slicer…<h3>Main Components</h3>This are de main parts that you need to construct a most basic “Storage Tree.”PLA Components<ul><li>1x Tree_base.stl</li><li>1x Tree Top.stl</li><li>1 or more: Storage Leaf_Simple.3mf<ul><li>Regarding part it is necessary to add 2 pauses on the slicer to insert 2 magnets</li><li><a target="_blank" href="https://amzn.to/3SqQU0I" rel="nofollow noopener">4x small neodymium magnets with 6mm diameter x 2.65mm thickness</a> for each storage leaf.</li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_i1h4maihntil.jpg"></figure><ul><li>1 or more: Subdivided Leaf&#39;s:<ul><li>Storage Leaf_Simple 4 divisions.3mf (optional)</li><li>Storage Leaf_Simple 3 divisions.3mf (optional)</li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_dx184728989e.jpg"></figure><ul><li>1 or more: Storage Storage Leaf with Tpu strips.3mf(optional)</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_uj6lq2797duy.jpg"></figure><ul><li>and another one, this adding some modularity to the leaf with boxes that can be added any way you like.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/f7f2cf5f-e709-48a9-849c-44f90a587444.jpg"> Boxes sizes are approximated values:<ul><li>132x63mm</li><li>63x63mm</li><li>63x28mm</li><li>28x25mm</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/0b3e8b60-a63d-4bf3-a79d-490e1b8435b3.jpg"></figure><ul><li>if needed: Trunk Segment.stl<ul><li>You will need this component to grow more leaf&#39;s, or to add a lid on the leaf if you don&#39;t have more space.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_rad3u0no45te.jpg"></figure><ul><li>1 or more: Lid.stl<ul><li>This component can be added in 2 situations, on the last leaf, or for each leaf if you are thinking of placing the sheets at different angles, in order to balance the weight.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_8bblt6nhpbfv.jpg"></figure><figure class="table"><table><tbody><tr><td>Simple Lid.stl</td><td>Lid with Stripes.stl (Not available for PRUSA without MMU</td></tr></tbody></table></figure><ul><li>4 and multiples of 4: Editable_Label.3mf<ul><li>You can edit the text as you need on Prusa Slicer, just doble click on it and change it.</li></ul></li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_4wpum36tqp3n.png"></figure><ul><li>If you are using bambu Slicer, you can edit the texto too. Right Click on field “edit text”:</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_ztzk6z06ll2h.png"></figure>PETG Components<ul><li>1 or more - Bush.stl (see section view above)</li></ul>Flex / TPU Components<ul><li>1x Anti-Slip Ring.stl</li><li>1x pack for each storage leaf: StorageLeaf_TPU-Strips.3mf</li></ul>Material that I&#39;ve used.<blockquote>These are affiliated links that will give me a small support, if you want these items use the following link, it will cost you the same.</blockquote><ul><li><a target="_blank" href="https://shrsl.com/4cvrb" rel="nofollow noopener">Bambu Lab - PLA Matte: Ash Grey</a></li><li><a target="_blank" href="https://shrsl.com/4cvrb" rel="nofollow noopener">Bambu Lab - PLA Matte: Ivory White</a></li><li><a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">Bambu Lab - PETG: Blue Gray</a></li><li><a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">Bambu Lab - TPU 95A HF: Grey and Black</a></li><li><a target="_blank" href="https://amzn.to/4clrJEy" rel="nofollow noopener">4x neodymium magnets with diameter of 6x2,65mm</a></li></ul><h3>Final Note</h3><blockquote>It&#39;s important to note that all of this work has been done voluntarily, with a lot of love and dedication. Tests have been conducted, time and material have been invested, so a small token of appreciation would be greatly appreciated. A simple thank you is enough, but if you&#39;d like, there are other ways you can support this ongoing development. Specific 3D printer storage leaf&#39;s will go under the<a target="_blank" href="https://www.printables.com/@jorge_rui/store" rel="nofollow noopener"> my club member ship</a>, so if you like this, stay tuned.</blockquote><h3>Models already Release that relates to this project.</h3><ul><li><a target="_blank" href="https://www.printables.com/model/802516-prusa-mk25-to-mk4-flexible-steel-sheets-project-le" rel="nofollow noopener">PRUSA Mk2.5 to Mk4 Flexible steel sheets - Project Leaf</a></li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_njoczqo2ap2d.jpg"></figure><ul><li><a target="_blank" href="https://www.printables.com/model/806798-universal-build-plate-support" rel="nofollow noopener">Universal Build plate support</a></li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_538y0wz3ka5f.jpg"></figure><ul><li><a target="_blank" href="https://www.printables.com/model/807958-storage-tree-leaf-for-x1-and-p1" rel="nofollow noopener">Storage Tree - Leaf for X1 and P1</a> (my club and printables store)</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-18_19dis15zwp0x.jpg"></figure><ul><li><a target="_blank" href="https://www.printables.com/model/811366-storage-tree-leaf-for-a1" rel="nofollow noopener">Storage Tree - Leaf for A1</a> (my club and printables store)</li></ul><figure class="image image_resized" style="width:50.43%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-19_6f36e67cfdf8e.jpg"></figure><a target="_blank" href="https://www.printables.com/model/815177-storage-tree-leaf-for-a1-mini" rel="nofollow noopener">Storage Tree - Leaf for A1</a> <a target="_blank" href="https://www.printables.com/model/815177-storage-tree-leaf-for-a1-mini" rel="nofollow noopener">mini </a>(my club and printables store)<figure class="image image_resized" style="width:50.27%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-24_7b1adecdacda3.jpg"></figure><ul><li><a target="_blank" href="https://www.printables.com/model/848169-storage-tree-ams-unit-parts-1" rel="nofollow noopener">Storage Tree - AMS unit Parts 1</a></li></ul><figure class="image image_resized" style="width:49.9%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-04-29_7834d77a1c4a2.jpg"></figure><a target="_blank" href="https://www.printables.com/model/850825-storage-tree-ams-unit-parts-2" rel="nofollow noopener">Storage Tree - AMS unit Parts 2</a><figure class="image image_resized" style="width:49.14%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/4aa033f3-cf03-4df0-973b-c909a53f6980.webp"></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/444408#profileId-350689" rel="nofollow noopener">Storage Tree - Leaf for Bambu Lab Tools</a></li></ul><figure class="image image_resized" style="width:49.2%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/fe568808-fac4-42dc-ad5f-8b1f2c582116.webp"></figure>&nbsp;Some of the leaf&#39;s available - You can find them on printables.com<ul><li><a target="_blank" href="https://www.printables.com/@jorge_rui/models" rel="nofollow noopener">Free Leafs</a></li><li><a target="_blank" href="https://www.printables.com/@jorge_rui/store" rel="nofollow noopener">Premium Leafs</a></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000378024/design/2024-03-31_c2338a92ba4c2.jpg"></figure><h3>Change Log</h3><ul><li>17-03-2024: Added leaf&#39;s with 3 and 4 divisions 3MF for Prusa Slicer.<ul><li>Added Gcode for Prusa Mk4 0.4 nozzle 0.2mm layer Printer Gcode, ready to print</li></ul></li><li>23-03-2024: Added leaf for the A1 and the A1 Mini. Next is the Prusa Mk4</li><li>03-04-2024: Added a base with the column set to a corner instead of the middle. This was a request made by a user. “Base_w_column_set_from_center_to_corner.stl”</li></ul>

Modular Storage Tree

Figures

Benjamin Kott

If you desire tailored presets for your boards, kindly download the source file and upload a profile that aligns perfectly with your boards. I will identify compatible boards and provide a list of available profiles. Should you require assistance, feel free to reach out to me. If you're the author of a board and contribute a profile here, it will be marked as recommended.&nbsp;Please refrain from uploading profiles that include boards. This model exclusively addresses the case - kindly ensure matching boards are noted in the description. This model is intended for continual development, fostering openness. If you have suggestions or requests, please share them in the comments or via direct message.<h2>Case for Swatch Display Boards with Fusion 360 Source Files</h2>My Swatch Boards were constantly in disarray, with no proper place to store them. I rarely needed them but wanted them easily accessible when I did. That's why I designed this case—to accommodate the unmodified boards snugly and keep them organized.&nbsp;Capable of holding up to 5 boards, this case features built-in dividers ensuring a secure fit even if you have fewer boards. Plus, a thoughtful hole at the back allows for easy retrieval of middle boards without disturbing the rest. Outer slots provide convenient access to the boards.&nbsp;What's more, there is no assembly needed. Simply place your boards inside and attach the cover—it's as easy as that.&nbsp;Removing the cover is also a breeze. Just press on one side of the marked areas, and it will pop out the connector, releasing the cover effortlessly.<h3>Compatible Boards</h3><h4>Swatch Display Board by Bambu Lab <a target="_blank" href="https://makerworld.com/en/models/14863" rel="nofollow noopener">https://makerworld.com/en/models/14863</a></h4><ul><li>5 Slots <a target="_blank" href="https://makerworld.com/en/models/180158#profileId-198192" rel="nofollow noopener">https://makerworld.com/en/models/180158#profileId-198192</a> </li><li>8 Slots <a target="_blank" href="https://makerworld.com/en/models/180158#profileId-211110" rel="nofollow noopener">https://makerworld.com/en/models/180158#profileId-211110</a></li><li>10 Slots <a target="_blank" href="https://makerworld.com/en/models/180158#profileId-211295" rel="nofollow noopener">https://makerworld.com/en/models/180158#profileId-211295</a> </li></ul><h3>Design Choices - Why I Opted for Fillets Over Chamfers</h3>In the world of 3D printing, chamfers often steal the spotlight for their print-friendly nature, thanks to their ability to tackle overhangs at a 45° angle. However, here's where my design takes a different path. I've meticulously fine-tuned the overhangs in this model, allowing me to embrace fillets instead of chamfers. &nbsp;Why? Because I believe in the power of a smooth, rounded feel along the corners. When it comes down to it, fillets and chamfers offer distinct tactile experiences. And since you're likely to interact with this object frequently, I wanted to ensure it exudes a sense of premium quality with every touch. &nbsp;So, please, let's stick with fillets for now. They are not only easy to print but also elevate the overall tactile feel of the model.<h3>Customizing</h3>The Fusion 360 source file is fully parametric, allowing you to customize the case for your preferred board effortlessly. Simply input the precise dimensions of your board, and the model will handle tolerances seamlessly. Adjusting the radius is as straightforward as lowering the number.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-18_8b4ba30921b21.png"></figure>&nbsp;For instance, let's consider the Swatch Display Board from Bambu Labs with the following dimensions:<ul><li>With: 107.9 mm</li><li>Length: 134.3 mm</li><li>Depth: 3.5 mm</li><li>Radius: 5 mm</li></ul>Transferring these dimensions to Fusion 360 is now a breeze. Set the desired number of boards for storage and refine the model accordingly. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-18_8bb3d2ac175b6.png"></figure>Upon completion, export the components individually.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-18_307bf0a794f7f.png"></figure>Always suggest using step files instead of stl files.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-18_d9b8f44542434.png"></figure>For consistently optimal print settings:<ol><li>Utilize any of my downloadable profiles.</li><li>Choose either the Case or the Cover.</li><li>Right-click on the object and opt for “Replace with STL.”</li><li>Select the corresponding Step-File you've just exported.</li><li>Ensure adaptive layer lines, particularly the top and bottom layers, are smoother for improved layer adhesion and a refined outer finish.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-18_998e0df0fb7cd.png"></figure>Now, simply hit print. 👌<h3>Updates</h3><h4>18.02.2024</h4><ul><li>Fusion 360 Source Files added</li><li>8 Board Version added</li><li>10 Board Version added</li></ul><h4>12.02.2024 - Release v2</h4>The initial version experienced layer adhesion issues, prompting adjustments to ensure optimal layer adhesion. However, these tweaks led to compromised surface finishes and sharp corners. The update rectifies these issues, ensuring smooth surfaces and eliminating sharp edges on the case.<figure class="table" style="width:100%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-12_807dc3ad9ea0e.jpg"></figure>Left v1, Right v2</td><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-12_758f48cda1f33.jpg"></figure>Left v1, Right v2</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-12_4acce29ef3c34.jpg"></figure>Bottom v1, Top v2</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/706201/2024-02-12_5cf5ca830718b.jpg"></figure>Front v1, Back v2</td></tr></tbody></table></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!

Filament Swatch Display Board Case

FilamentSwatches

OLD_FART

Simple Gridfinity compatible tray for the Bambu Labs Scraper. Modeled to be as short as possible, but still possible to stack without scraper inserted.

Gridfinity 1x4 Bambu Scraper Holder

Gridfinity

mgm86

A dishwasher container for small parts. It can be clicked onto the rods. Tested with a Bosch dishwasher.I use it for small skewers. Inner dimensions: 70mm (height) x Ø36mm.&nbsp;It should be printed with PETG because of the heat.

Dishwasher container for small parts

kitchen

#toPrint

Harald Geisler

<div><h1>Summary</h1><div>Ein kleiner Helfer ob Cerankochfeld oder 3-D Druckplatte. Der Schaber besteht aus zwei Teilen. Die Unterseite wird als Arretierung gesteckt. Bei der kleinen Ausführung werden die Teile verklebt. Kleber: Uhu Hart Spezialkleber Transparent Klingen: <a href="https://www.pearl.de/a-NX7668-3010.shtml" rel="nofollow">https://www.pearl.de/a-NX7668-3010.shtml</a><hr>A little helper whether ceramic hob or 3-D pressure plate. The scraper consists of two parts. The bottom side is plugged as a lock. In the small version, the parts are glued. Glue: Uhu Hart special glue transparent Blades: <a href="https://www.pearl.de/a-NX7668-3010.shtml" rel="nofollow">https://www.pearl.de/a-NX7668-3010.shtml</a></div></div>

Pressure bed scraper, Hob scraper

P1S_PrinterCabinet

tsubus

IMPORTANT: you cannot use the profiles that some people have posted, you must use the raw files (click download STL and select the appropriate 3mf file). Makerworld removes any custom gcode from posted profiles.&nbsp;Simple temperature towers for the Bambu Lab P1S created with Tinkercad. The files already contain the necessary g-code to print correctly with Bambu Studio.&nbsp;Currently the following towers have been added:  <ul><li>190-230 (PLA) (steps of 5)</li><li>230-190 (PLA) (steps of 5, reversed)</li><li>230-270 (PETG) (steps of 5)</li><li>270-230 (PETG) (steps of 5, reversed)</li><li>240-280 (ABS) (steps of 5)</li><li>280-240 (ABS) (steps of 5, reversed)</li><li>210-240 (TPU) (steps of 5)</li><li>240-210 (TPU) (steps of 5, reversed)</li></ul>

Bambu Lab P1S Temperature Tower PLA,PETG,ABS,TPU

P1S_Calibration

DAVEfromCZE

If AMS has problem with new model of the prusament spool print this is reusable

New Prusament Spool AMS fixer (NPSAF)

P1S_AMS

LayerLux3D

This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don&#39;t know how it works with other M3 bolts, but feel free to try. :)&nbsp;I also added a Gridfinity version.