xtiaaaan

FearMePrints

<h3>MTG Deck Box Pro Features</h3><ul><li>100+ double sleeved cards - This deck box has been tested to hold 100 double sleeved cards using Dragon Shield perfect fit inners and Dragon Shield matte and/or art sleeves as well as a handful of sleeved tokens in the main compartment.</li><li>Plastic Card Case - Protect your favorite card or your commander card with a plastic hard case and showcase it in the MTG Deck Box Pro. This deck box has been tested to fit both the GameGenic Slide Card Case and the TCG Full Protective Sleeve.<ul><li>Recommend to go with the TCG Full Protective Sleeve as it fits a double sleeved card and provides a more secure enclosure.</li></ul></li><li>Compact Design - The Pro version has been tested in the GameGenic Dungeon 1100 to fit up to 8 in total. The Pro Max version can fit up to 6. The Pro version can also fit into the GameGenic Academic 133+ XL</li><li>Pro Max Dice/Token Tray - The Pro Max version can also fit a set of dice, life counters, and fits sleeved tokens as well.</li><li>Magnetized Design - The magnetized design provides for a satisfying and secure enclosure. The top lid will securely slide and magnetize into position, which also stays put when tossed around. The top lid can also be magnetized to the bottom of the box for easy storage as shown in the picture.</li><li>Interchangeable Parts - The top lid for both the Pro and Pro Max are interchangeable.</li></ul><h3>Print Options</h3><ul><li>With Embedded Magnets - With this method you will pause the print to add the magnets directly into the 3d print. I recommend that you use a bit of super glue to keep the magnets in place otherwise the magnets may be magnetized to the print head. The 3mf file has pauses already built into the file</li><li>Without Embedded Magnets - With this method you can print all parts without any pauses and add the magnets afterwards.</li></ul><h3>Printing</h3><ul><li>This has been tested with, TPU, PETG, PLA, matte PLA, as well as sparkle PLA.</li><li>15% infill with gyroid pattern recommended.</li><li>Add a brim if you experience curling issues on tight corners.</li><li>Easily add color to your print by choosing a different color for the top and bottom. Could also easily be painted with the Bambu slicer and add multi color with the AMS.</li></ul><h3>Assembly</h3><ul><li>Magnets required are 10x4x2mm, can be purchased here: <a target="_blank" href="https://www.amazon.com/dp/B09M6BJK5N?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B09M6BJK5N</a><ul><li>The Pro model requires 12 magnets, and the Pro Max model requires 16 magnets.</li><li>Pro Tip: take careful consideration when orienting the direction of the magnets as the polarity will affect the usability of the product. Speaking from experience here :)</li></ul></li><li>Plastic Hard Shell Card Sleeve recommended. Tested to fit both GameGenic Slide Card Case and the TCG Full Protective Sleeve. I HIGHLY recommend the TCG Full Protective Sleeves, they are very, very secure, and they will fit your commander (or favorite card) double sleeved!<ul><li><a target="_blank" href="https://www.amazon.co.jp/gp/product/B08J3R2J21/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1" rel="nofollow noopener">https://www.amazon.co.jp/gp/product/B08J3R2J21</a></li><li><a target="_blank" href="https://amazon.com/Slide-Card-Cases-Hard-Shell-Innovative/dp/B0CDM7BWBX/ref=sr_1_2?crid=S4L21I4OMJ5V&amp;keywords=gamegenic+slide+card+case&amp;qid=1707364453&amp;sprefix=gamegenic+slide+card+cas%2Caps%2C112&amp;sr=8-2" rel="nofollow noopener">https://amazon.com/Slide-Card-Cases-Hard-Shell-Innovative/dp/B0CDM7BWBX</a></li></ul></li></ul>

FMP - MTG Deck Box Pro

3dEvangelist

<h2>The Problem!</h2>I would like to share an observation regarding the production of pultruded PET with a re-creator. The filament diameter tends to vary significantly during the manufacturing process. In our community, to ensure compatibility with modern extruders, we produce filaments with a diameter ranging between 1.6 to 1.7.Upon testing the filament on the Bambu A1mini, it came to my attention that the extruder pulley was not gripping the filament adequately, resulting in slippage. Upon disassembling the components, I identified that a modification to the extruder lever containing the counterforce bearing was necessary. This lever serves as a stop against the extruder structure to prevent complete closure.&nbsp;Some pictures made by <a target="_blank" href="https://forum.bambulab.com/u/amzaldua" rel="nofollow noopener">https://forum.bambulab.com/u/amzaldua</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2024-01-30_73ad834d40307.jpeg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2024-01-30_9d5c0cfaf521b.jpeg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2024-01-30_26b50b9089e6f.jpeg"> <h2>Solution!</h2>I adjusted this aspect of the lever, ensuring that the pulley now maintains proper contact with the bearing.This adjustment has improved the filament extrusion process, addressing the issue of slippage encountered during testing on the Bambu A1mini. I believe this modification will enhance the performance of our PET pultruded filament on a broader scale.&nbsp;&nbsp;<figure class="table" style="width:96.6%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_7ac3a00ac6d23.png"></td><td><ol><li>Extruder wall;</li><li>Extruder leaver;</li><li>Bearing;</li><li>Extruder gear;</li><li>Filament;</li></ol></td></tr></tbody></table></figure>Another issue that this can cause is with the printing of highly flexible filaments such as TPU or TPE with Shore hardness lower than 90 Shora A. This is because the bearing is unable to grip a filament that changes diameter unless it is exceptionally rigid.I have observed similar design choices in other printers, and I am uncertain as to why the designer created this gap. Hopefully, it is not a crucial element that could lead to unforeseen issues in the future. Regardless, based on my initial tests, the modification has proven effective.If you decide to undertake this project, please do so at your own discretion and risk. I do not assume responsibility for any issues that may arise from this modification to your equipment.&nbsp;<h2>How To Print!</h2><ul><li>Infill Density: 25%</li><li>Layer Resolution: 0.16mm</li><li>Material: Preferably PETG or ABS, but PLA is also acceptable.</li><li>Supports: Supports are necessary for stable and accurate printing.</li></ul>These settings have been optimized to achieve high-quality results in FDM 3D printing. A layer resolution of 0.16mm provides fine details, and a 25% infill density balances material economy with part strength.PETG is the preferred material due to its durability and resilience, though PLA is a viable option depending on project requirements.Ensure supports are included as needed, especially for complex geometries or overhangs. This will ensure successful prints and high-quality final parts. I printed mine in ABS on another printer!<h2>How to</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_5b09b130215b6.gif"></figure>&nbsp;&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_cdf853be0f9c3.png"></figure>First, take out the PTFE tubes! second, unscrew the two screens! and save them because they are different! In the end, take out the Splitter carful with the flat cable is to fragile.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_1f71dbef49759.png"></figure>&nbsp;&nbsp;&nbsp;First, take out the hotend!Then the screws that have arrows!Careful taking out the cover because a spring and a screw stopper may fall down!&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_94dedd41f1ba2.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Take out the pin and the bearing from the standart leaver and fit on the one that you printed ! To take out mine I had to use a hammer and some love to take out the pin! careful to don&#39;t damage the parts!&nbsp;At final take it all together again in reverse!&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h2>Material Settings <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-20_ab256749b1701.png"></h2>Like we are controlling the max Volumetric speed we don&#39;t need to change the speeds of the profiles.&nbsp;<h2>Final Thoughts</h2>If you choose to proceed with this modification, I encourage you to thoroughly document your experience and capture the process through photographs. Your insights and visual representation will be valuable contributions to the community&#39;s shared knowledge.Test the modification extensively, pushing its limits, and share feedback on any adjustments you make. This collaborative approach not only validates successful changes but also aids in the ongoing development and improvement of the modification.It&#39;s essential to exercise caution when modifying your printer, as it carries the risk of damaging specific components. Approach the process with care to mitigate potential losses and ensure the long-term functionality of your equipment.Your active participation and feedback play a crucial role in advancing our understanding of 3D printing technologies. Enjoy the experimentation!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000095155/design/2023-12-16_5a01b5bce3e63.png"><figcaption>Cubes made by PET pultruded with these hack</figcaption></figure>&nbsp;<h2>Side Effects</h2>&nbsp;Like I said, the hack improves the printing of TPU, I am testing it right now because I don&#39;t know all the side effects that this hack can create! Use it with Caution! The tests I made with the available filaments here in EU! TPE Filaflex 90ShorA - Basic settings - 02Layer - max flow rate : 6.5mm3 - it can be improved i dont push it harderTPU 3dDfils 85shoreA- Basic settings - 02Layer - max flow rate : 6.5mm3 - it can be improved i dont push it harderTPU Filaflex 70ShoreA - Basic settings - 02Layer - max flow rate : 1.5mm3 and a flow :1.2 - We have to test to be shore but i fell it can be improved.&nbsp;All of them were using retraction !on! with 2mm pull!<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/T2Sa6LFWV5Y"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=T2Sa6LFWV5Y"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/T2Sa6LFWV5Y" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;

A1 Extruder Upgrade - Print TPU TPE SOFT MATERIALS

Bambu

MakePro

Very easy holder for iPhone continuity camera for Dell UltraSharp U3223QE.

Apple iPhone continuity camera holder Dell monitor

Desktop

LegoConstruct

Holds 6 100mm diameter by 2mm high coasters. One version with one notch and one with 2 notches. One holds 6 100mm diameter by 2.7mm high coasters, has 4 notches.

Coaster Holder

House

mrreloaed

Action Camera Magnetic Mount (Pendant)&nbsp;For proper assembly, you need the following items:<ol><li>x8 10x3mm round magnets</li><li>x12 8x2mm round magnets </li><li>x1 M5 20mm screw + x1 M5 nut</li><li>x1 shoelace or any other lace to hold the back under your shirt firmly</li></ol>Feel free to change the settings of the print, pauses are already adjusted as well. First pause for you to insert smaller magnets, then the second pause is to insert bigger corner magnets. I recommend 15% infill gyroid, otherwise, it might get too heavy. It holds up pretty well even through a thick hoodie, tested on a bike, and it feels good.&nbsp;&nbsp;VERY IMPORTANT: You must face your magnet in the right way, or the front and back will reject each other instead of joining.

Action Cam Magnetic Mount

Misc

LoboCNC

This robot arm is (very) roughly styled as an 80% scaled version of the UR3 industrial robot. It uses the same design philosophy of simply placing a motor/reducer actuator unit at each joint, with six actuators stacked up to make a 6-axis arm. Now while the UR3 uses hollow torque motors coupled with harmonic drives ($$$) for the actuators, this robot uses the stepper motor/compound planetary actuators I posted here: <a href="https://www.printables.com/model/132262-robot-actuators" rel="nofollow">https://www.printables.com/model/132262-robot-actuators</a>. Two of the large actuators get used for the first two base joints, one of the medium sized actuators gets used for the elbow joint, and three of the small ones get used for the wrist joints. And the gripper* I've posted here: <a href="https://www.printables.com/model/132264-conformal-robot-gripper" rel="nofollow">https://www.printables.com/model/132264-conformal-robot-gripper</a>.For the controller, I've used seven of Pololu's Tic T500 stepper controllers with custom firmware I wrote to support coordinated motion. You can find the gory details, including a Windows test utility program, here: <a href="https://drive.google.com/open?id=1rKRuWC4jAOekrds_WGUC7DkwlVsk2zdb" rel="nofollow">https://drive.google.com/open?id=1rKRuWC4jAOekrds_WGUC7DkwlVsk2zdb</a>This is very much a work in progress and I'll be filling in the holes as I get time. In the meantime, please feel free to post questions in the comments section if you need details I haven't gotten to yet. Please read through all of the material here and ask me any questions you have before starting to build this - it isnot an easy weekend project!&nbsp;<figure class="media"></figure>&nbsp;And here is an excellent video posted by jlauer of his make of the arm: <a href="https://www.youtube.com/watch?v=tEbJV32GyYU" rel="nofollow">https://www.youtube.com/watch?v=tEbJV32GyYU</a>And another by jlauer with the development of his custom controller board: <a href="https://www.youtube.com/watch?v=RdmdFIhCo4M" rel="nofollow">https://www.youtube.com/watch?v=RdmdFIhCo4M</a>*The gripper shown in the video is slightly different than the one posted.For anyone interested in participating in the continued development of this robot, Thingiverse user jlauer has set up a discussion forum: <a href="https://forum.makerforums.info/c/ChiliPeppr/robot-arm" rel="nofollow">https://forum.makerforums.info/c/ChiliPeppr/robot-arm</a>UPDATE: I've just posted an anti-backlash version of the small wrist actuator that has greater torque, less backlash and runs more smoothly: <a href="https://www.thingiverse.com/thing:3566678" rel="nofollow">https://www.thingiverse.com/thing:3566678</a>Category: Engineering

MTG

Bambu

Desktop

House

Misc

Robotics