Xtalk

TheSirTiger

This is an articulated dog model.Designed for FDM printing - can be easily printed with standard or custom settings - suitable for multicolour printers

Articulated Dog

kids

CopyKnight

With the introduction of the Air-Stream-Freezer, our team set itself the task of developing a model for the Bambulab X series. The biggest challenge was to make it LIDAR compatible. Our team rose to this challenge, further developed the Air-Stream-Freezer and quickly designed the Air-Stream-Turbine. Once again, I would like to thank the entire team, who have once again invested every spare minute for months in the development of the project. Once again, it has been designed, designed, changed and tested. A special thank you to Paul, to whom we tirelessly handed over new designs so that he could check compatibility. Once again, it is expressly stated that remixes of this product design are completely prohibited, as once again no phase or rounding off has been added more than necessary. To ensure that there is something for everyone&#39;s taste, this time there are of course two more versions available in addition to the 7 well-known ones: Firstly, the original: 1: Air-Stream-Turbine (it wasn&#39;t called that for no reason) <a target="_blank" href="https://makerworld.com/en/models/429489#profileId-333824" rel="nofollow noopener">https://makerworld.com/en/models/429489#profileId-333824</a> 2: Bambu Lab logo with lettering <a target="_blank" href="https://makerworld.com/en/models/429475#profileId-333807" rel="nofollow noopener">https://makerworld.com/en/models/429475#profileId-333807</a> 3: Bambu Lab lettering single <a target="_blank" href="https://makerworld.com/en/models/429500#profileId-333837" rel="nofollow noopener">https://makerworld.com/en/models/429500#profileId-333837</a>  4: Bambu Lab logo single <a target="_blank" href="https://makerworld.com/en/models/429494#profileId-333828" rel="nofollow noopener">https://makerworld.com/en/models/429494#profileId-333828</a> 5: Bambu Lab P1S version <a target="_blank" href="https://makerworld.com/en/models/429485#profileId-333817" rel="nofollow noopener">https://makerworld.com/en/models/429485#profileId-333817</a> 6: Bambu Lab P1P version <a target="_blank" href="https://makerworld.com/en/models/429480#profileId-333812" rel="nofollow noopener">https://makerworld.com/en/models/429480#profileId-333812</a> 7: completely without bells and whistles, branding or logo <a target="_blank" href="https://makerworld.com/en/models/429474#profileId-333806" rel="nofollow noopener">https://makerworld.com/en/models/429474#profileId-333806</a> Newly added: 8: Bambu Lab X1C version <a target="_blank" href="https://makerworld.com/en/models/429482#profileId-333814" rel="nofollow noopener">https://makerworld.com/en/models/429482#profileId-333814</a> 9: Bambu Lab X1E version <a target="_blank" href="https://makerworld.com/en/models/429486#profileId-333819" rel="nofollow noopener">https://makerworld.com/en/models/429486#profileId-333819</a> What&#39;s new in this version: The Air-Stream turbine can now be printed completely unsupported. There is a split inlet and an asymmetrical outlet for the air supply. Due to the asymmetrical outlet, it is only possible to speak of 360 degrees in relative terms, which is why we have omitted the degree sign in our illustration and replaced it with an asterisk. In case of doubt, this model can be printed with only two walls and completely without infill with a 0.2 layer height. However, we recommend 3 walls with 10% infill and a layer height of 0.1, or 4 walls and 10% infill with a 0.2 nozzle. For all variants, a corresponding number of upper layers should be ensured. This means 5 layers with 0.2 and 10 layers with 0.1 layer height. The magnets that must be used are the same size as those used in the original Bambu Lab component. (4x2 &amp; 2x2) For design reasons it was not possible to use larger magnets. At the point where the smaller magnet has to be placed, care must be taken when slicing that &#34;recognize thin walls&#34; is selected, as the wall thickness at this point is very small. However, this does not matter, the magnet can still be glued in cleanly without any problems and will hold. With a 0.2 Nozzle there is no problem at all, which is why the High Quality and Ultra pressure profile is specially designed for a 0.2 Nozzle.  It is generally known that the subject of component cooling is viewed with a great deal of skepticism and suspicion. Many people always want proof. But how and with what could you prove something if the evidence proves nothing, because it cannot prove anything, as it could just as well be manipulated? Then there are always many theoretical things that could possibly prove something, but theory and practice are worlds apart. That&#39;s why we won&#39;t try to convince anyone here. Everyone has to convince themselves. We simply want to invite everyone to do a little mini-experiment that they can understand for themselves. Place a glass filled with water under the original fan and everyone will be able to see the same result with their own eyes. The largest bulge in the water surface will not be in the middle under the nozzle, although this is where it would make the most sense in principle. The bulging of the water surface of the Air-Stream turbine, on the other hand, is much more centrally located under the nozzle. Again, these are facts that anyone can see for themselves if they are willing to carry out this simple test. Because let&#39;s not kid ourselves, pictures of a comparison of two 4-sided overhang tests do not seem to be credible enough, which is why we are sparing ourselves a direct comparison this time. Last but not least, it should be noted that the component should only be printed by someone who can dismantle the original and assemble the reprinted one without help. We will not provide any help in this regard, nor will we encourage anyone to possibly destroy the front housing assembly of the printer. Or to put it another way, you dismantle at your own risk. One last point should be mentioned. This model can also be printed without infill and completely without support. Neither the model nor one of the four printing profiles can be held responsible in the event that it should become detached from the build plate during printing. We decided to add a GIF of a print (High Quality and Ultra print profile) to prove that with a clean build plate and well calibrated ABS filament it is possible to print successfully without support and without brim. For anyone else who may have difficulties, a brim could be added. However, this should not be an argument for rating the model or print profile poorly.  What is the difference between the print profiles? Fast Print: Nozzle 0.4 - layer height 0.2 - first layer 0.2 - walls 2 - infill 0 % Medium: Nozzle 0.4 - layer height 0.1 - first layer 0.2 - walls 3 - infill 10 % Gyroid High Quality: Nozzle 0.2 - layer height 0.1 - first layer 0.2 - walls 4 - infill 0 % Ultra: Nozzle 0.2 - layer height 0.1 - first layer 0.2 - walls 4 - infill 10 % Gyroid Thank you and have fun.        Mit der Einführung des Air-Stream-Freezer hat sich unser Team es zur Aufgabe gemacht, ein Modell für die Bambulab X-Serie zu entwickeln. Die größte Herausforderung dabei war es, diesen LIDAR kompatibel zu designen. Dieser Herausforderung hat sich unser Team gestellt, den Air-Stream-Freezer weiterentwickelt und kurzer Hand die Air-Stream-Turbine konzipiert.  Auch heute möchte ich mich abermals bei dem gesamten Team bedanken, das abermals wieder jede freie Minute seit Monaten in die Entwicklung des Projektes investiert hat. Es wurde wieder erneut entworfen, designed, geändert und getestet. An Paul gibt es ein besonderes Dankeschön, den wir unermüdlich neue Entwürfe übergaben, damit er die Kompatibilität überprüfen konnte.  Einmal mehr wird hiermit noch einmal Ausdrücklich erklärt, das Remixe von diesem Produktdesign vollständig untersagt sind, da auch hier wieder keine Phase oder Abrundung mehr als nötig hinein konstruiert wurde. Damit auch diesmal wieder etwas für jedermanns Geschmack dabei ist, stehen diesmal zu den 7 altbekannten natürlich zwei weitere Versionen zu Verfügung:  Zum einen das Original:  1: Air-Stream-Turbine (der wurde nicht ohne Grund so genannt) <a target="_blank" href="https://makerworld.com/en/models/429489#profileId-333824" rel="nofollow noopener">https://makerworld.com/en/models/429489#profileId-333824</a>2: Bambu Lab Logo mit Schriftzug <a target="_blank" href="https://makerworld.com/en/models/429475#profileId-333807" rel="nofollow noopener">https://makerworld.com/en/models/429475#profileId-333807</a>3: Bambu Lab Schriftzug einzeln <a target="_blank" href="https://makerworld.com/en/models/429500#profileId-333837" rel="nofollow noopener">https://makerworld.com/en/models/429500#profileId-333837</a>4: Bambu Lab Logo einzeln <a target="_blank" href="https://makerworld.com/en/models/429494#profileId-333828" rel="nofollow noopener">https://makerworld.com/en/models/429494#profileId-333828</a>5: Bambu Lab P1S Version <a target="_blank" href="https://makerworld.com/en/models/429485#profileId-333817" rel="nofollow noopener">https://makerworld.com/en/models/429485#profileId-333817</a>6: Bambu Lab P1P Version <a target="_blank" href="https://makerworld.com/en/models/429480#profileId-333812" rel="nofollow noopener">https://makerworld.com/en/models/429480#profileId-333812</a>7: komplett ohne Schnickschnack, Branding oder Logo <a target="_blank" href="https://makerworld.com/en/models/429474#profileId-333806" rel="nofollow noopener">https://makerworld.com/en/models/429474#profileId-333806</a>  Neu dazugekommen ist:  8: Bambu Lab X1C Version <a target="_blank" href="https://makerworld.com/en/models/429482#profileId-333814" rel="nofollow noopener">https://makerworld.com/en/models/429482#profileId-333814</a>9: Bambu Lab X1E Version <a target="_blank" href="https://makerworld.com/en/models/429486#profileId-333819" rel="nofollow noopener">https://makerworld.com/en/models/429486#profileId-333819</a>  Was ist neu an dieser Version:  Die Air-Stream-Turbine kann nun komplett ohne Unterstützung gedruckt werden. Es gibt einen geteilten Einlass und einen asymmetrischen Auslass für die Luftzufuhr. Durch den asymmetrischen Auslass kann nur relativ von 360 Grad gesprochen werden, weshalb wir anstelle des Grad Zeichens in unserer Abbildung abgesehen und dies mit einem Sternchen ersetzt haben.Dieses Modell kann im Zweifelsfall mit nur zwei Wänden und komplett ohne Füllung mit einer 0.2 Schichthöhe gedruckt werden. Empfohlen wird allerdings 3 Wände mit 10% Füllung und einer Schichthöhe von 0.1, bzw. mit einer 0.2 Düse 4 Wände und 10% Füllung. Bei allen Varianten sollte auf entsprechend viel obere Schichten geachtet werden. Das heißt 5 Schichten bei 0.2 und 10 Schichten bei 0.1 Schichthöhe. Die Magneten die benutzt werden müssen, haben die selbe Größe wie die, die beim Original Bauteil von Bambu Lab verwendet wurden. (4x2 &amp; 2x2) Konstruktionstechnisch war es nicht anderes möglich größere zu verwenden. An der Stelle wo der kleiner Magnet platziert werden muss, muss beim Slicen darauf geachtet werden, dass „dünne Wände erkennen“ ausgewählt wird, da die Wandstärke an dieser Stelle sehr gering ist. Dies macht aber nichts, der Magnet kann trotzdem ohne Probleme sauber darin eingeklebt werden und wird halten. Mit einer 0.2 Nozzle gibt es dahingehend überhaupt keine Problem, weshalb das High Quality und Ultra Druckprofil speziell für eine 0.2 Nozzle ausgelegt ist.  Im allgemeinen ist bekannt, dass das Thema Bauteilkühlung mit viel Skepsis und Argwohn beäugt wird. Viele wollen immer Beweise. Aber wie und womit könnte man denn etwas beweisen, wenn die Beweise nichts beweisen, weil sie nichts beweisen können, da sie ebenso gut manipuliert sein können? Dann gibt es immer viele theoretische Dinge die womöglich etwas beweisen können, doch zwischen Theorie und Praxis liegen bekanntlich ja auch Welten. Deswegen werden wir hier auch nicht versuchen irgendjemanden zu überzeugen. Überzeugen muss sich schon jeder selbst. Wir wollen lediglich jeden einladen ein kleines für jeden selbst nachvollziehbares Miniexperiment zu machen. Stellt ein Glas mit Wasser gefüllt unter den Originallüfter und jeder wird dasselbe Ergebnis mit seinen eignen Augen wahrnehmen können. Die größte Ausbeulung der Wasseroberfläche wird nicht mittig unter der Nozzle sein, wo es prinzipiell allerdings am sinnvollsten wäre. Die Ausbeulung der Wasseroberfläche der Air-Stream-Turbine hingegen ist wesentlich mittiger und zentraler unter der Nozzle wiederzufinden. Das sind wiederum Tatsachen von denen sich jeder selbst überzeugen kann, sofern er gewillt ist, diesen einfachen Test zu machen. Denn machen wir uns nichts vor, Bilder von einem Vergleich zweier 4 Seiten-Überhangtests scheinen, so wir wir feststellten, nicht glaubwürdig genug zu sein, weshalb wir uns diesmal einen direkten Vergleich ersparen.  Zu guter Letzt sei noch darauf hingewiesen, dass das Bauteil nur jemand drucken sollte, der auch ohne Hilfe, den Originalen demontieren und den neu Gedruckten montieren kann. Es wird von uns dahin gehend keinerlei Hilfe geben, noch werden wir jemanden dazu zu animieren, womöglich die vordere Gehäusebaugruppe des Druckers zu zerstören. Oder nochmal anders ausgedrückt, sie demontieren auf eigene Gefahr. Ein allerletzter Punkt sei noch erwähnt. Dieses Modell kann auch ohne Infill und komplett ohne Unterstützung gedruckt werden. Weder das Modell noch eins der vier Druckprofile kann etwas dafür, für den Fall dass es sich während des Druckes von der Bauplatte womöglich lösen sollte. Wir haben uns entschieden extra eine GIF von einem Druck (High Quality und Ultra Druckprofil) hinzuzufügen, um zu belegen, dass es mit einer sauberen Bauplatte und gut kalibrierten ABS Filament problemlos möglich ist ohne Unterstützung und ohne Brim erfolgreich zu drucken. Für alle anderen, die womöglich Schwierigkeiten bekommen sollten, könnten ein Brim hinzufügen. Allerdings sollte dies keine Argument dafür sein, das Modell oder Druckprofil schlecht zu bewerten.  Worin unterscheiden sich die Druckprofile?  Fast Print: Düse 0.4 – Schichthöhe 0.2 – erste Schicht 0.2 – Wände 2 – Füllung 0 %Medium: Düse 0.4 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 3 – Füllung 10 % GyroidHigh Quality: Düse 0.2 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 4 – Füllung 0 %Ultra: Düse 0.2 – Schichthöhe 0.1 – erste Schicht 0.2 – Wände 4 – Füllung 10 % Gyroid  Danke und viel Spaß.

Fan Flow 360 Toroidal Air Duct Letter and Logo 风扇

x1c hacks

Toby

Do you find yourself digging through piles of electronics, PCBs, and various bits and pieces in your drawers or storage containers? Let&#39;s put an end to the clutter with Gridfinity!&nbsp;Check out my newest addition: A 1x2x6 Gridfinity ESP32 storage bin. It&#39;s just the right size to organize up to five ESP32s comfortably. I&#39;ve made the slots a little wider so that they can fit items from different makers or batches without a hitch.&nbsp;The model supports friction-mounted 6x2mm magnets.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802381/2024-04-01_6f4f230e65c8f8.png"></figure>My preferred printer settings:<ul><li>Material: Bambu PLA (Tough) on a Textured PEI Plate</li><li>Presets: 0.20mm Standard</li><li>Walls: 3</li><li>Infill: 13% Gyroid pattern</li></ul>You can tweak the wall thickness and infill to use less material, but these settings gave me the most even-looking print.&nbsp;Please share any thoughts or suggestions on this model. I always appreciate your feedback!&nbsp;My other designs:<figure class="image"><a href="https://makerworld.com/en/@jxryk28ntb" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/802381/2024-04-01_9848b86d859d48.png"></a></figure>Please take a look at <a target="_blank" href="https://makerworld.com/en/@jxryk28ntb" rel="nofollow noopener">my other designs</a>, too. If you can&#39;t find what you need, just let me know. I&#39;m here to help fill in the gaps in the collection for you.&nbsp;Happy Printing!&nbsp;&nbsp;Gridfinity by Zack Freedman: <a target="_blank" href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow noopener">https://www.youtube.com/watch?v=ra_9zU-mnl8</a>

Gridfinity - ESP32 Storage Bin (5x)

esp32

cv6Channel

A friend had the idea to make a hodor for everyone. The ones I found didn&#39;t match our wishes, o I did my own. We wanted to have the lower Part at the H and I enlarged the H a bit for a better fit.So, its not really a remix. But there are others out there which are similar.&nbsp;I printed the HODOR upside down, to have my texture appearing at the top. I used 4 outlines and a good Infill to have it stable. Maybe it was too much, but we like it.

HODOR Door Stop - hold the door

Random

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

kids

x1c hacks

esp32

Random

AMS hacks