xrockinmarkyx

3DPrintyi

Tips for printing:<ul><li>Supports: Yes (tree)</li><li>Layer height: 0.16mm (optimal)</li><li>Wall loops: 3</li><li>Infill: 15%</li><li>Seam position: back</li><li>Wall generator: -</li><li>Detect thin walls: No</li></ul>Colors and filament I used (5 Color Version):<ul><li>PLA / Dark Brown - for the fur and feet</li><li>PLA / Light Brown - for the body</li><li>PLA / White - for the horn</li><li>PLA / Black - for the eyes</li><li>PLA / Pink - for the snout</li></ul>But you can print it in 4 colors too if you like! Here the (4 Color Version):<ul><li>PLA / Brown - for the body and fur</li><li>PLA / White - for the horn</li><li>PLA / Black - for the eye and feet</li><li>PLA / Pink - for the snout</li></ul>Or decide for yourself which colors and how many you want to use!&nbsp;When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!&nbsp;Happy printing!

Little Highland Cow

Random

enricoRE

Pokemon Pikachu Puzzle Jigsaw print in placeHi guys this is my new Pokemon Jigsaw Puzzle print in place.follow layer swap settings below.I hope you like it.Thank you&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest. Don&#39;t scale Z height

Pokemon Pikachu Puzzle Jigsaw print in place

pokemon

HG_Design

Dragon egg box

dragons

mrhiab

Another Harley LightboxSwap at layerNo ams needed4 layers white3 orangerest black with ironing top surface, flow at 22%&nbsp;

Harley Lightbox

light box

GuyH77

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it&#39;s purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. &nbsp;Alternative Design: Only tested by me so far: <a target="_blank" href="https://makerworld.com/en/models/507985#profileId-423740" rel="nofollow noopener">https://makerworld.com/en/models/507985#profileId-423740</a>&nbsp; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.&nbsp;I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.&nbsp;The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.

X1C P1P P1S base insert | Ramp for debris removal

Mods

highland cow planter