xprimnt

tgsparky77

Loved the original design but needed ones for the 3 and 5 slot version. I would suggest printing them in at least PETG. I printed them in PETG-CF as they come out looking more professional than normal PETG.

WAGO 221 DIN Mount 2-3-5

Tools

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Bearrr

Cover for a 8mm riser bolt that sticks out on many aluminum extrusion rigs for protection. Can be adjusted for different size bolts and heights.

8mm Riser Bolt Protector for Sim Rigs and Aluminum Extrusion Profiles 

Sim Rig

LoReArt3d

headphone stand<ul><li>Hole 12.8 mm adjustable </li><li>Bolts M5</li></ul>

headphones stand

Music

Collecticraft

<h2>Insight Unveiled: The Divine and the Mortal</h2>Step into the realm where divine wisdom meets mortal curiosity with &#34;Insight Unveiled.&#34; This extraordinary project brings together the majesty of Zeus, king of the gods, with the enigmatic allure of the human skull.<h3>Key Features:</h3><ol><li>The Divine Visage: The bust of Zeus, crafted with meticulous attention to detail, exudes the power and authority befitting the ruler of Mount Olympus.</li><li>Mortal Remnants: Nestled within the bust lies a human skull, a poignant reminder of the fleeting nature of mortal existence and the eternal wisdom sought by humanity.</li><li>Symbolic Union: The juxtaposition of Zeus&#39;s divine countenance with the mortal skull creates a compelling visual narrative, inviting contemplation on the intersection of the divine and the mortal realms.</li></ol>Project Objectives:<ul><li>Explore themes of mortality, divinity, and the pursuit of knowledge.</li><li>Challenge conventional notions of power and authority by blending the divine with the mortal.</li><li>Spark introspection and philosophical inquiry into the nature of existence and the mysteries of the cosmos.</li></ul>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> gain exclusive commercial rights to utilize and distribute this unique fusion of divine and mortal symbolism

Insight Unveiled: The Divine and the Mortal

Decorations

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-15_92eaaa9691a14.gif"></figure>The gearbox used in this design is modular and will be released as it's own series soon™, if you have any thoughts or feedback please share so I can continue to improve the design!<h3>Modifications and Add-on Designs</h3><ul><li>[NEW!] Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li></ul><h3>Specifications</h3><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h3>Printing tips</h3><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h3>Launcher Parts</h3><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h3>Launcher Assembly (Gears + Housing)</h3><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don't remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h3>Toroidal Ring Assembly</h3><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h3>Changes</h3><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM launcher featuring compact planetary gearbox

Toys

KYZ Design

Dry up to 7 spool desiccant canisters at once in a filament dryer!&nbsp;<ul><li>Print in ASA, ABS or PETG to prevent the part sagging upon heating.</li><li>You will need two pieces of the same. There are finding features that align the two pieces, and one central desiccant holder will lock them together.</li><li>The external dimensions of this is based on a Bambu reusable spool and will fit in the AMS as well as all filament dryers (that I know of).</li><li>If you are buying indicating silica gel beads, the orange beads are the non-toxic ones and the blue ones are the toxic ones.</li><li>Leave an air gap in your filament dryer to let the moist air out when drying.</li></ul>Please feel free to upload print profiles for any of my uploads - for various printers, materials, etc.&nbsp;The desiccant PACKET holder I use in the pictures is <a target="_blank" href="https://makerworld.com/en/models/72591" rel="nofollow noopener">here</a>. This has a fine thread so they clamp the Bambu spools quite tightly - making “spool shims" unnecessary when refilling your spools.  <figure class="image image_resized" style="width:78.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_15419d570f1c88.png"></figure>&nbsp;The desiccant loose bead holder I use is <a target="_blank" href="https://makerworld.com/en/models/23470" rel="nofollow noopener">here</a>. Note that this remix has holes on the sides of the tube (among other changes) to make drying easier when they are outside of the filament spools - this is the primary reason I made the remix - to make drying easier.<figure class="image image_resized" style="width:78.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_256f89d3ca1f.png"></figure>If you want a loose bead holder specifically for Bambu spools, check out <a target="_blank" href="https://makerworld.com/models/179426" rel="nofollow noopener">this one</a>:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2024-03-18_e9981deb76fe38.jpeg"></figure>&nbsp;That is all, happy printing!

Tools

FPV

Sim Rig

Music

Decorations

Toys

Machine Upgrades