Xiendra

EPIQ3D

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

Garden

designs.by.Marcum

The only place you need to go for all of your gorgeous dog kit cards!&nbsp;With these models I set out to do something that was both simple to print and assemble, but also instantly recognizable as your favorite furry friend. This simplicity makes them easy for even the youngest children to slide together, while also keeping a sophisticated look for display on your office / home desk.&nbsp;Current breeds include:<ul><li>Australian Cattle Dog</li><li>Australian Shepherd (P)</li><li>Basset Hound</li><li>Beagle</li><li>Border Collie</li><li>Boston Terrier</li><li>Boxer (P)</li><li>Bull Terrier</li><li>Chihuahua</li><li>Cocker Spaniel</li><li>Corgi</li><li>Dachshund</li><li>Doberman Pincsher</li><li>French Bulldog</li><li>German Shepherd</li><li>Golden Retriever</li><li>Great Done (P)</li><li>Husky</li><li>Labrador Retriever</li><li>Newfoundland</li><li>Nova Scotia Duck Tolling Retriever</li><li>Pomeranian</li><li>Poodle</li><li>Rottweiler</li><li>Saint Bernard</li><li>Saluki</li><li>Scottish Deerhound</li><li>Scottish Terrier</li><li>Shetland Sheepdog</li><li>Shiba Inu</li><li>Shih Tzu</li><li>Vizsla</li><li>Yorkshire Terrier (P)</li></ul>Breeds above marked with “(P)” are located exclusively on Patreon, link below.&nbsp;The kit card connectors were designed to easily snap away, but for the cleanest finish it is recommended to use snips to remove them. Each dog may have a slightly different assembly due to shape and size, but the fundamentals will remain the same amongst all of them.<ol><li>Snap all connectors to free each piece</li><li>Slide the ears into the slot at the top of the head</li><li>Slide the larger connector into the cutout at the front of the body</li><li>Slide the smaller connector into the cutout at the back of the body</li><li>Align to the two cutouts on the legs with the connectors and slide in</li><li>Repeat for the last leg</li><li>Enjoy!</li></ol>If you&#39;d like access to a Commercial License and exclusive designs not seen anywhere else, such as Cat Breeds:<a target="_blank" href="https://patreon.com/designsbyMarcum" rel="nofollow noopener">Join me on Patreon</a>&nbsp;Check out my latest public release in this series<a target="_blank" href="https://makerworld.com/en/models/447508#profileId-354203" rel="nofollow noopener"> Wildlife Kit Card - Multiple Species</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199263/design/2024-05-02_03abe4aac8db1.jpg">&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - White</li><li>Overture Matte PLA - Light Gray</li><li>Overture Rock PLA - Rock White</li><li>Overture Matte PLA - Chocolate</li><li>Overture Matte PLA - Black</li><li>Inland PLA - Marble White</li><li>Inland PLA+ - Bone White</li><li>Inland Matte PLA - Brown</li></ul>

Dog Kit Card - Multiple Breeds

Kit Card

Stag 3D

<h2>Wicked Witch of the East Bookmark</h2>Attention all bookworms, add some fun to your book with this novelty Wizard of Oz bookmark. &nbsp;Nice simple print requiring minimal assembly and no supports. Simply place the shoes over the legs with a dab of glue and push fit the legs onto the main holder. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779574/2024-02-27_7b855f06b1fb9.png"></figure>&nbsp;

Wicked Witch Bookmark

Bookmark

Sevro

Pendant in shape of stylized Manta Ray.For best quality use as low layer height as possible, in print profile I used 0.08 mmScale as you want

Manta Ray Pendant

Pendant/Keychain

TechSavage3D

It&#39;s the Thirst Zapper from Fallout 4!&nbsp;Includes stand.  This is a W.I.P. so the photos may not represent the current state of the model.  This is an old model I designed in my early days of Fusion 360 and Substance Painter, but I decided to return to it and make it fully 3D printable since that was always the original goal. The model is broken into parts based on color and the parts are oriented in the best way for successful printing and very few supports are required.  The only parts that may need the AMS are the main body, and main grip part, and only if you would rather not paint them.

Fallout 4 - Thirst Zapper

Toys

Melix

I started with just the angry ghost earrings version. But I wanted to have some more options so I&#39;ve added those too. If you are missing a variant, please let me know in the comment section! Dimensions (hwd in mm): 24.95 x 25.65 x 1.3 Don&#39;t forget to look at <a href="https://www.printables.com/@Melix/models" rel="nofollow">my other designs</a> too!If you&#39;re happy with my designs, <a href="https://www.buymeacoffee.com/melix3d" rel="nofollow">you will make my day if you buy me a cappucino</a>!

Ghost earrings halloween

Halloween

Quirkys3dprinting

Fox earrings

Earrings

MalcTheOracle

<h3>Introduction</h3>You are a patriotic person, who is bored and want to enjoy yourself in your off moments. The world has let you down so far, making you unhappy and seeking a solution.<h3>Solution</h3>Meet the United States of America Flag - Textured Gyro Fidget Spinner, yes, it&#39;s a mouthful, but it is also a sizeable package of patriotism and entertainment.&nbsp;It has the flag on both sides, split into three sections, a wonderfully textured edge and a very fast spin rate.&nbsp;It is as beautiful as it is functional. Your friends will be so jealous (half the fun) and will want their own so they can pretend to be as good as you are.&nbsp;This is one of an increasing set of <a target="_blank" href="https://makerworld.com/en/@MalcTheOracle/collections/1340887" rel="nofollow noopener">Flag Spinners</a>.<h3>Specifications</h3><ul><li>45mm diameter</li><li>12mm thick</li><li>3 sections</li><li>Flag on both sides</li><li>7 sections of texture</li><li>Patriotism is off the charts</li></ul><h3>Presentation Trays</h3>The Flag Spinners are compatible with my <a target="_blank" href="https://makerworld.com/en/models/475901" rel="nofollow noopener">Fidget Spinner Trays</a>. You can store 1 to 10 Flag Spinners at a time as there are ten different capacity trays to fit your needs.<h3>Also Available</h3><ul><li><a target="_blank" href="https://makerworld.com/en/models/380712" rel="nofollow noopener">Flag of the United States of America Coaster</a></li></ul>

USA Flag - Textured Gyro Fidget Spinner

Other Holiday/Events

Slowpoke's Workshop

easter eggs decoration

Easter

EzzySziggy

A nice decorative owl vase/tea-light holder with hanger , for indoor and outdoor

Owl tea-light holder/vase

Vase/Plant Pots

mikehurst81

Snowman Christmas Ornament. You'll need two ams to make this ornament

Snowman Christmas Ornament

Christmas

CpRandom

This is one of my design of Bow Ties, perfect for anyone who want to show some particular clothing accessory and be cool at the same time, I will upload other styles and variants…hope you like it!This is the BEST MAN version, like the others you will only need a thin band/ribbon to tie it around your neck.You can choose every color you want, your imagination is the only limitI&#39;m making some different version of this bow tie, they are easily swappable, the center is always the same.HERE ARE THE OTHER VARIANTS:Bow Tie Hearts NO AMS → <a target="_blank" href="https://makerworld.com/en/models/493326#profileId-407065" rel="nofollow noopener">https://makerworld.com/en/models/493326#profileId-407065</a> Bow Tie POIS → <a target="_blank" href="https://makerworld.com/en/models/493352#profileId-407092" rel="nofollow noopener">https://makerworld.com/en/models/493352#profileId-407092</a> &nbsp;

Bow Tie Wedding Best Man Papillon

Housewares

Orion

double circle bracelet

Accessories

Albi27

DescriptionCharms to use with bracelets, shoes, necklaces, key rings or anything else. perfectly compatible with Pandora bracelets.&nbsp;Charms available in the collection&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450501/design/2024-05-01_fb1873b4463bb.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450501/design/2024-05-01_44169cde99caf.jpg">&nbsp;PrintingThe charms are perfect to be printed with a 0.2mm nozzle, some of them can be printed with a 0.4mm nozzle but I don&#39;t recommend it to maintain good quality and functionality of the print.&nbsp;TipsTo reduce waste it is possible to replace the prime tower with simple charms, setting the slicer purge in this object by clicking with the right button on the object.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450501/design/2024-05-01_9f958abc2e4b4.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450501/design/2024-05-01_befaeb705948a.jpg">&nbsp;In the future I will update the collection with new icons and shapes, if you have any suggestions don&#39;t hesitate to write to me.

Charms Collection - 40+1 - Ideal for 0.2mm nozzle

Beads

OuijaWitch

Dog Hair Sign

Door Signs

blecheimer

Hey Wastelander!Do you want to get rich? But collecting bottle caps is taking too long? Wanna get rich fast? Then just download my model and print your own bottle caps! What does this shortcut to riches cost, you might ask? Nothing, it is for free. But leaving a &#34;boost&#34; for an old designer is very much appreciated. ;)&nbsp;This is a Nuka-Cola bottle cap from Fallout. It is designed to be printed with an AMS system in two colours. For best results an 0.2mm nozzle is recommended though it can be printed with an 0.4mm nozzle as well. But the 0.2mm version has a sharper look and the logo does not appear to be so washy. Take a look at the pictures and judge yourself what is better.But wait - do you want a bottle for that cap? No problem, <a target="_blank" href="https://makerworld.com/en/models/438005" rel="nofollow noopener">here is my Nuka-Cola bottle</a> that perfectly matches the bottle cap.And for the collectors out there, <a target="_blank" href="https://makerworld.com/en/models/446415" rel="nofollow noopener">here is the Nuka-Cola Quantum bottle &amp; cap</a>.&nbsp;EDIT 2024-04-23: Some users had bed adhesion problems with my 0.4mm print profile. It seems that my first layer setting of 0.1mm height was too aggressive. I changed it back to standard in the print profile. Fingers crossed, that this will help.&nbsp;Print preparation: Make sure that your print bed is clean and grease-free. An unsufficient bed adhesion is in most cases not a problem of the print profile but a cleanliness issue. If you want you can use glue on your print bed but for PLA this should not be necessary. If possible use the smooth textured PEI plate and a bed temperature of 55-60°C. For the print quality it is important that you use a good and calibrated filament. Know your k-factor and use the correct flow setting. Bambu filament makes this step easier but any other quality brand will do the job.&nbsp;Print settings: For a 0.2mm nozzle use the 0.06mm High Quality settings and change the initial layer line width to 0.12mm. Yes, this is smaller than the nozzle but it will work and give you all the fine details. The wall generator should be set to &#34;Arachne&#34;. For the surface patterns I recommend using the concentric version as it has a nice finish. If you want you can reduce the printing speed a little bit to optimze quality. For the same reason I am using a small prime tower.With a 0.4mm nozzle use the 0.12mm Fine settings but set all layer heights after the first layer to 0.1mm. The first layer should stay at 0.2mm height. The initial layer line width must be 0.21mm otherwise the logo will be a mess. The rest is the same as above: Arachne wall generator, concentric surface patterns, slightly reduced speed and a small prime tower.&nbsp;For more detailed print settings take a look at my print profiles. The print profiles can be used with A1, P1 and X1 printers. And now go and print yourself a fortune before the brotherhood finds out!&nbsp;If you want to support me you can leave a tip at <a target="_blank" href="https://ko-fi.com/blecheimer" rel="nofollow noopener">ko-fi.com/blecheimer</a>.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="https://creativecommons.org/licenses/by-nc-nd/4.0/" rel="nofollow noopener">CC-BY-NC-ND 4.0</a>. The shown model is fanart and must not be used commercially. Copying this model to other 3D printing websites is not allowed without my permission.

Nuka-Cola Bottle Cap (from Fallout) 

Magnets

YDesign

<h3>HSW Universal Screwdriver Holder</h3>This design includes 4 different size screwdriver holders to fit handle widths of 30mm, 25mm, 20mm and 13mm. I have designed both standard inserts that require standard adapters present in the honeycomb storage wall and also full inserts that do not require adapters in the honeycomb wall. The two types of inserts are shown below and also in the attached pictures.<h4>Print Settings:</h4>These holders can be printed in either PLA or PETG.<ul><li>Material: PLA/PETG</li><li>Layer height: 0.2mm</li><li>Perimeters/Wall Loops: 4</li><li>Sparese Infill Density: 25%</li></ul>&nbsp;Inserts requiring standard HSW adapters:&nbsp;<figure class="image image_resized" style="width:81.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/846898/2024-04-11_fe0fbf7c5e91d.png"></figure>&nbsp;Full inserts not requiring adapters:&nbsp;<figure class="image image_resized" style="width:81.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/846898/2024-04-11_40dc791ce2d13.png"></figure>

HSW Universal Screwdriver Holder

XentoBi

<h3>Model Description</h3>“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions.The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being able to see how much filament is left on your spool, having passthrough holes for respooling, and more places to stick the loose end of your filament. The original locking mechanism is unchanged, and these will work interchangeably with the original version if you only want to do one side or something. The lock tab is still there for accepting the Bambu Lab refills and the original shims work as well if you want the extra locking power. I would recommend you print this in something that can withstand a dehydrator. I used ASA.I printed in 0.2mm layers without supports, with a light glue coating on the bed for ASA. &nbsp;<h3>Descrizione Modello</h3>La versione "v2" non ha un'area per l'etichetta nel caso in cui desideri risparmiare ancora più filamento. Altrimenti stampa le versioni “v3”.Il porta bobina originale Bambu Lab funziona bene ma richiede molto filamento e manca alcune caratteristiche interessanti, come la possibilità di vedere quanto filamento è rimasto sulla bobina, avere fori passanti per il riavvolgimento e più posti dove attaccare il filamento sciolto estremità del filamento.Il meccanismo di bloccaggio originale è invariato e funzionerà in modo intercambiabile con la versione originale se vuoi fare solo un lato o qualcosa del genere. La linguetta di blocco è ancora lì per accettare le ricariche Bambu Lab e anche gli spessori originali funzionano se desideri un potere di chiusura extra.Ti consiglierei di stamparlo in qualcosa che possa resistere a un disidratatore. Ho usato l'ASA.Ho stampato in strati da 0,2 mm senza supporti, con un leggero rivestimento di colla sul letto per ASA.

Bambu Lab Reusable Spool Holder

Bambu Labs

Amalthea

Paw Patrol cookie cutter

Cookie Cutters

Williams Industries

Made some of these planter decor pieces for our various planters. I have added the stick portion in Bambu Studio so you can edit it to your liking. There is also a profile of just decor piece without the stick, these hang well with <a target="_blank" href="https://amzn.to/49il4Z7" rel="nofollow noopener">THESE</a> (affil. link) &nbsp;I did the stick portion in bambu studio in case you would like to make it longer or shorter.&nbsp;For personal use, commercial use in the Patreon below&nbsp;See my other planter decor <a target="_blank" href="https://makerworld.com/@WilliamsIndustr/collections/1013644" rel="nofollow noopener">HERE</a>:&nbsp;<figure class="image image_resized" style="width:72.67%;"><a href="https://makerworld.com/@WilliamsIndustr/collections/1013644" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/828523/2024-04-03_5ba5644efc7aa.jpg"></a></figure>We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/828523/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;

Humming Bird Planter Decor

Toppers

3D Manufacturing

Version 2 of my plantsupport&nbsp;stack several on top of each other to support taller plants. now with printable rods to stay 100% 3D printed and easier use.you can scale down everything for smaller plants like i used for my chili or my herbs.&nbsp;&nbsp;Here is version 1 with round rods: <a target="_blank" href="https://makerworld.com/en/models/417819#profileId-320247" rel="nofollow noopener">https://makerworld.com/en/models/417819#profileId-320247</a><figure class="image image_resized" style="width:38.43%;"><a href="https://buymeacoffee.com/3dmanufacturing" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000445177/design/2024-04-30_5a356e9d83f16.gif"></a></figure>

Plantsupport V2

Useful

3D Prints This Week

Load black and white into the ams.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Coffee / Beer / Coaster / Funny / Gift Idea / 

Coasters

piranha

Elevate Your Bathroom to Award-Winning Status!&nbsp;Introducing the ultimate in bathroom accolades: The 5-Star Review Poster! Transform your humble restroom into a critically acclaimed masterpiece with this unique and hilarious poster, showcasing rave reviews from the most discerning of guests. Featuring enthusiastic endorsements like “Amazing experience!” and “Would poop here again,” alongside accolades such as “Nominated Room of the Year,” this poster guarantees to add a layer of prestige and humor to your loo.Crafted for those who appreciate a blend of quality, style, and a good laugh, this poster includes unforgettable praises such as:<ul><li>“I laughed... I cried.”</li><li>“Best 45 minutes of my life!”</li><li>“Life-changing. Mesmerizing. Jaw-dropping.”</li><li>“Endlessly inventive.”</li><li>“I could NOT believe what I was seeing!”</li></ul>Perfect for personal use or as a quirky gift, the 5-Star Review Poster is not just decor—it’s a statement that your toilet is more than a facility; it&#39;s an unforgettable experience. Make your bathroom the talk of the town (for all the right reasons) and give your guests a chuckle they won&#39;t forget. Get ready to bask in the glory of having the most talked-about toilet in your circle.&nbsp;Who knew a visit to the bathroom could be so rewarding?&nbsp;Versions with and without AMS. Arachne, no purge tower.Ignore the error with floating areas.&nbsp;Please consider gifting a boost, if your toilet looks better thanks to this sign.

5 Star Toilet Award - Funny Poster

Wall Art

3DeepPrinting

Don&#39;t Lose Your Head Fallout Sign&nbsp;Yes there is one similar already posted. But this one is much better. I designed this from scratch first in Adobe Illustrator and then in Fusion 360. &nbsp;Prints very easy with AMS.I always print signs at 0.28 and they look great.&nbsp;Enjoy.