Designed at the request of a friend whose child loves these kind of models. Used AI assistance to design the concept and modified in Meshmixer and tweaked print profile. Had a number of failed but this profile works consistently. If you choose to print it be prepared for careful support removal and the possibility of a print failure. Advise high quality PETG or Metallic PLA- silk PLA is likely to fail.

Kitchen Cabinet Over Door hooks V2 mounting screw.This is a modification of my original design found here. https://makerworld.com/en/models/726672-kitchen-cabinet-over-door-hooks#profileId-658071 Based on a suggestion for a hole that will allow you to mount it. I used this excellent parametric screw maker to create a few screws that you can print and use as thumbscrews. https://makerworld.com/en/models/791309-flat-thumb-screw#profileId-729768

Made this for a vegan friend who wanted a funny sheep figure similar to the Chick-fil-A cow. Will print on dual nozzle printers in 4 hrs with 68gm filament. Don't recommend single nozzle as it will take 14 h and 230gm of filament. Made with Makerlab image to 3 d. You can edit the sign in bambu studio if you want

I love skadis pegboards but have run out of wall space! So I designed non destructive mounts I have several poles in the basement 3 inches/ 75.5 mm in diameter so I designed a bracket that can be mounted to the pole with 2 heavy duty zip ties and the skadis rail that you normally screw into the wall snaps into the bracket. You can then mount the board to the rail as if it was screwed into the wall. Another bracket mounted with zip ties can be used to screw in the lower end of the board.

Made a stand for this excellent model https://makerworld.com/en/models/127907-razor-crest#profileId-138431. Its designed in 3 parts for easy printing and the top piece snaps in place on the base as shown in the picture. No glue needed.

The upcoming movie "The Mandalorian and Grogu!" features a beskar rondel, a round armor piece with a mudhorn insignia worn by grogu. My superfan friend requested I make a model of it so I created this set of coasters and a holder in fusion that I am sharing as fanart. You can print these optional antislip bases found here if you wish. https://makerworld.com/en/models/1404693-tpu-anti-slip-base-for-100-mm-round-coasters#profileId-1457341

Just a whimsical container with anatomically correct lung reliefs to keep an inhaler used by people with asthma or other lung disease. Made it for a friends daughter who keeps it on her bathroom counter to keep it off the surface and getting wet. Quick easy print on any bambu printer.

A Nurses Day/ Week gift idea. Show appreciation for the nurses you know. A classic Portrait of Florence nightingale created with Bambu Labs Canvas tool. Created a frame with the portrait should snap fit in. Might need a tiny amount of CA glue. Added a well known quote and her signature. You can optionally use a stand like this excellent design by @PenolopyBulnick-the largest size-https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc#profileId-167215.

A quick and easy to print gift for Nurses Week. Uses standard 3 inch square sticky pads like the Post It brand. Print with the default settings. Worked well both in PLA and Petg . Prints in less than two hours and uses about 50G of filament .Needs AMS. To customize- switch to object mode in Bambu slicer - Customize the colors by selecting each object - Logo, front and back and the filament color. You can customize the text by clicking edit text to spell out the name.

Easy nondestructive way to mount a skadis board to the wall of a cubicle. Made it at a user request (thomasshore @user_518209443) -accommodates a width of 57mm. The hangers are designed to snap into the groove on a skadis mounting rail. The board can then be mounted to the rail with the supplied hardware. I printed in PETG. The top of the hanger is 3 mm thick. Also check

Rocky is the lovable alien from the movie “Project Hail Mary”. This is a static model-printed in Bambu lab metallic copper. Its a relatively quick print- 4 hrs on X1C. and uses 88 gm of filament.

I added perforations on the top of this excellent school bus pencil holder (https://makerworld.com/en/models/604092-school-bus-pencil-case#profileId-1374940) created by @9percent to allow pencils to be kept vertically so that it functions as a desktop pencil holder. Adding the remix at a user request.