woolzy81

FreshPrints805

Fix for the bad design of the tie wrap they tell you to use on X-Axis will damage cable over time. The tie wrap they tell you to put on the X-Axis to hold the cable crushes the cable and will damage over time. Here is a fix to keep your cable flat and in good condition and not being crushed. Print 100% infill.&nbsp;

Anycubic Kobra 2 Max Tie Wrap Replacement X-Axis

Kobra K2 Max

Collecticraft

<h2>Nobody Balance: Finding Harmony in Stillness</h2>Step into the realm of tranquility with &#34;Nobody Balance,&#34; the latest addition to our &#34;<a target="_blank" href="https://makerworld.com/en/models/389450#profileId-290371" rel="nofollow noopener">Nobody</a>&#34; series. Inspired by the serene art of finding balance on one leg, this project invites you to explore the delicate interplay between strength and grace.<h3>Key Features:</h3><ol><li>Serene Sculpture: &#34;Nobody Balance&#34; captures the essence of inner calm and poise, with a figure delicately poised on one leg, exuding a sense of tranquility and mindfulness.</li><li>Symbol of Harmony: Through the art of balancing on one leg, this sculpture symbolizes the harmony and equilibrium we strive to achieve in our daily lives, both physically and emotionally.</li><li>Mindful Meditation: Embrace the stillness of &#34;Nobody Balance&#34; as you immerse yourself in a moment of mindful meditation, finding solace in the quietude of the present moment.</li><li>3D printing Challenge: Try by yourself to test the boundaries of your 3D printer trying to manage this print in one piece only!</li></ol>Project Objectives:<ul><li>Encourage mindfulness and self-awareness through the practice of balancing on one leg.</li><li>Inspire a sense of inner peace and tranquility in the viewer, fostering a deeper connection with oneself and the world around them.</li><li>Serve as a visual reminder of the beauty and harmony that can be found in moments of stillness and presence.</li></ul>Commercial License: Patrons will get commercial license, allowing them to utilize the design for personal or commercial purposes, enhancing their creative endeavors with ease.&nbsp;NB: with the actual dimension the base doesn&#39;t need glue. feel free to add it!

Nobody - Balance: Finding Harmony in Stillness

Models/Figures

MK 3D

Balloon Dog Sitting Keychain&nbsp;STL, 3MF and STEP Files

Balloon Dog Sitting Keychain

Keychains

Creatività in 3D

<h2>Putin's jointed worm</h2><h3>Jointed, it also screws onto itself</h3>Other worms to the collection: <a target="_blank" href="https://makerworld.com/en/models/385019#profileId-285315" rel="nofollow noopener">https://makerworld.com/en/models/385019#profileId-285315</a>  Netanyahu<a target="_blank" href="https://makerworld.com/en/models/385105#profileId-285431" rel="nofollow noopener">https://makerworld.com/en/models/385105#profileId-285431</a> Trump<a target="_blank" href="https://makerworld.com/en/models/387718#profileId-288315" rel="nofollow noopener">https://makerworld.com/en/models/387718#profileId-288315</a> BidenNo support, easy and quick to print

Putin's articulated worm

Toys

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;🔥 Unleash the Hulk within!!! 💥&nbsp;Get ready to bring the power of the green behemoth to life with our L3GO-inspired 3D printable Hulk figure, standing a towering 10 inches tall! With articulate arms and hands, this masterpiece captures the raw strength and intensity of everyone&#39;s favorite gamma-powered hero.&nbsp;🌈 Key Features:✅ 10 inches of pure Hulk power✅ Articulate arms and hands for dynamic poses✅ L3GO-inspired design for a perfect blend of nostalgia and modernity✅ Printable with just 1 Bambu AMS unit – Easy and Efficient!&nbsp;🚀 Bambu AMS Compatibility: Seamless printing awaits you! Our Hulk figure is designed to be printed effortlessly with just one Bambu AMS unit, ensuring a hassle-free and high-quality printing experience. Let the Automatic Material System (AMS) handle the details while you witness the Hulk come to life.&nbsp;💪 Unleash Your Creativity: Whether you&#39;re a superhero fanatic, a L3GO enthusiast, or a 3D printing pro, this Hulk figure is a must-add to your collection. Create dynamic displays, showcase your printing skills, and let the Hulk take center stage in your masterpiece lineup.&nbsp;Don&#39;t forget to check out our other Marvel L*GO inspired figures to complete your collection!

Bricks Hulk

Lego

m.parts.3d

Pin Car Replacement

Car Items

squinn

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will best work for your drill bit, and then the cover on the back can be easily removed with a twist to dump the debris when you're done. A protruded pointer is included on the top of the piece to help with alignment.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163361/2023-11-11_s7cilgno7l35.gif"></figure>This model has been designed so that no supports or brim are required, and the STLs are oriented as they should be on the print bed. Post print, the front and middle piece can be simply snapped together, so no glue or other hardware is required. I printed all three pieces of the one shown in the pictures in PLA, but TPU would likely work really well for the bottom “cover” piece if you have it.

Drill Guide and Dust Catcher

Tools

Jackmnb

<h2>3 Slot MLOK covers for your MLOK rails, MANY different designs in the ZIP folder. Uses 2x M4 MLOK screws and nuts, I found mine on Amazon. I recommend you print all my files with 100% infill.</h2>&nbsp;&nbsp;

3 Slot MLOK Covers

Airsoft

DjangoCashflow

Embark on a delightful construction adventure with the "Micro Dump Truck Kit," a finely detailed and interactive model that brings the classic dump truck to your tabletop. This engaging kit is perfect for hobbyists, collectors, and young engineers eager to explore the mechanics of a dump truck in miniature form. Features:Kit Card Assembly: Each part of the dump truck is precision-engineered and laid out on a kit card, making it easy to identify and remove the pieces for assembly.Functioning Parts: The truck comes to life with rotating wheels and a tilting bed, providing an authentic look and feel.High-Detail Design: Modeled with meticulous attention to detail, this micro dump truck is a faithful replica of the real thing, from the chassis to the bed.Filament Hinges and Axles: Utilizing filament for hinges and axles, the assembly is simple and seamless—no screws or glue required.Kid-Friendly Project: This kit offers a fun and educational experience for children, helping them develop fine motor skills and an appreciation for mechanical design.Easy Assembly: Clear instructions make the building process a breeze, ensuring a rewarding and enjoyable construction experience without any additional tools.Pure Building Enjoyment: Perfect for hobbyists, model enthusiasts, or families looking for a creative project.  Assemble your own Micro Dump Truck today and take pride in creating a miniature mechanical masterpiece that's more than just a toy—it's a small-scale celebration of design and craftsmanship. Spare Parts can be found in the RAW Files. Now with Multicolor parts for non AMS Printer Assembly Instructions for Micro Dump Truck - Step 1: Main FramePreparation:<ul><li>Gently cut out all the pieces from the kit card. Take special care not to remove the holding pins as these will be crucial for assembly.</li><li>Straighten a piece of filament to be used as the axle and hinge. The straighter the filament, the smoother the assembly will be.</li></ul>Step 1: Assembling the Main Frame Locate the front axle, front, cabin, lights, exhaust and frame parts: <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_e8c3702aaf87.jpeg">Lights and Exhaust Placement:<ul><li>Locate the small holes on the underside of the cabin piece.</li><li>Align the pins of the lights and exhaust pieces with these holes.</li><li>Insert the lights at the front and the exhaust on the side of the cabin, pressing gently until they click into place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3d9ff77fab1d2.jpeg"></li></ul>Frame Attachment:<ul><li>Take the main frame part and align it with the front grille piece.</li><li>Carefully push the frame into the grille until it is securely attached. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a3cda27a6210a.jpeg"></li></ul>Cabin Installation:<ul><li>Find the slot on the front part of the frame, which is designed to hold the cabin.</li><li>Slide the cabin down through this slot, ensuring that it sits flush with the frame. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_e22830b9be403.jpeg"></li></ul>Front Axle Installation:<ul><li>From below the assembly, position the front axle piece so that it aligns with the corresponding slots in the frame.</li><li>Press the axle upwards, making sure that the push pins engage with the underside of the cabin and the frame, locking everything into place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_813e33188038f.jpeg">  </li></ul>Step 2: Bed AssemblyParts Needed:<ul><li>Top bed part</li><li>Front bed part</li><li>Side bed parts (two pieces)</li><li>Bottom bed part <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a159c4027979e.jpeg"></li></ul>Assembly Steps:Front Bed to Bottom Bed:<ul><li>Start by taking the front bed part and aligning it with the bottom bed part.</li><li>Carefully insert the tabs of the front bed part into the corresponding slots on the bottom bed part. Press gently until they click into place, ensuring they are fully seated. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3b305d910b035.jpeg"></li></ul>Attaching the Sides:<ul><li>Next, take the side bed parts and align them with the assembled front and bottom pieces.</li><li>Gently slide the side pieces into the slots, connecting them to both the front and the bottom bed parts. Be cautious during this step to avoid bending the pins. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_8a7a507492e6f.jpeg"></li></ul>Securing the Top Part:<ul><li>Finally, take the top bed part and align it over the structure you've just assembled.</li><li>Press the top bed part down onto the front bed part, ensuring that the tabs click into the slots securely. It should fit snugly and complete the bed of the dump truck. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3d6ced68ab2a5.jpeg">  </li></ul>Step 3: Securing Bed to Main FrameParts Needed:<ul><li>Main frame from Step 1</li><li>Bed assembly from Step 2</li><li>Filament piece</li><li>Cutting tool <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_8571c0b363389.jpeg"></li></ul>Assembly Steps:Aligning the Bed and Frame:<ul><li>Take the bed assembly you completed in Step 2 and line it up with the main frame from Step 1. Ensure the holes for the hinge on the bed align with those on the frame.</li></ul>Inserting the Filament Hinge:<ul><li>Insert the filament piece through the aligned holes to act as a hinge pin. The filament should go in smoothly but with a snug fit. This will allow the bed of the dump truck to tilt. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3a0e9c3326f5f.jpeg"></li></ul>Securing the Hinge:<ul><li>Once the filament is in place, check that the bed tilts up and down freely. This will simulate the dumping action of the truck.</li></ul>Trimming Excess Filament:<ul><li>Use the cutting tool to trim any excess filament from both sides of the hinge. Be careful to cut it flush with the frame to prevent any sharp edges.</li></ul>Step 4: TiresParts Needed:<ul><li>Six tires (four with a smaller inner diameter and two with a larger inner diameter)</li><li>Rear axle spacer</li><li>Two wheel caps</li><li>Filament piece</li><li>Optional: Glue <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_9866d769fd27e.jpeg"></li></ul>Assembly Steps:Wheel Cap and Filament Axle:<ul><li>Take one wheel cap and slide it onto one end of the filament piece. This will act as a stopper for the wheels. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a607f2ca94359.jpeg"></li></ul>Attaching Rear Wheels:<ul><li>Slide the two tires with the smaller inner diameter onto the filament piece, up against the wheel cap you just attached. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_902ba28f4d0ce.jpeg"></li></ul>Inserting Rear Axle Spacer:<ul><li>Position the rear axle spacer between the frame parts at the rear of the dump truck. It should fit snugly and help to maintain the correct distance between the wheels.</li></ul>Securing Rear Wheels to Frame:<ul><li>Guide the filament axle with the attached wheels through the rear hub area of the main frame.</li><li>Once the axle is through, attach the remaining two wheels to the protruding end of the filament axle.</li><li>Secure the wheels in place by adding the second wheel cap to the end of the filament. Press firmly to ensure it is snug. If the fit isn't tight enough, you may add a drop of glue to hold the wheel cap in place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_4de856e34d4b1.jpeg"></li></ul>Attaching Front Tires:<ul><li>Take the tires with the larger inner diameter and press them onto the front axle pins protruding from the main frame. Ensure they rotate freely for smooth rolling action. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_08aad8271686d.jpeg"> Your Micro Dump Truck is now complete. Well done! It's a neat little project to finish, and I hope you find it a satisfying addition to your collection or as a fun toy. Enjoy your craftsmanship.</li></ul>&nbsp;

Micro Dump Truck Kit Card - Liebherr 284 T

Kit Cards

Bambu Lab

This is a spool holder for Bambu filaments.

Bambu Spool

3D Printer Acc.

Davewilhelm

The best way to collect the filament poops is with a poop shaped bin!

Poop Shaped Poop Collector (A1 & A1mini)

Bambu A1 Mini

9arr3tt

Print Profile for P1P 5x5 is the largest size that fits on Bambu build plates

5x5 Gridfinity Box By Pred

Gridfinity

@H_N

请严格按图四五摆放  建议壁厚3层  填充率99%   打印后使用胶水拼接。&nbsp;Please place it strictly according to Figure 45 The recommended wall thickness is 3 layers, and the filling rate is 99% Use glue splicing after printing.

尾翼  empennage

Funny

schuleit

Needed a simple light weight mount for my Meta Quest 3 headset - made a quick prototype in Fusion 360 that would fit a couple of compact round powerbanks . Walls are only 1 mm so intentionally very lightweight - expect the model can be scaled to fit different powerbanks - to make sure the battery does not roll out you could use a rubber band on the mount - potentially the design will be refined but works as intended. Works great printed with a 0.2 mm nozzle - because it is very thin no infill is required. Printed with a non-brand generic PLA on standard settings and that worked out great!&nbsp;UPDATEIncluded a version with 2 mm walls for increased robustness - both in a 0.20 and 0.16 nozzle size

Meta Quest 3 Powerbank mount

Meta Quest

SavageLau

If you want commercial license, check out my bio and get it from Patreon. &nbsp;&nbsp; A very simple hexagon coaster design, the diameter is 100mm, 4mm thickness, very solid one. Printed with two color. You can print it with TPU if you want . Besure to clean your build plate before print. Also enable to ABL feature.

Honeycomb Coaster 100mm dia

HOUSE ITEMS

DuckMeat

What is it?This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in black TPU.&nbsp;How to print itFeel free to use the default settings specified for the material for your printer. If you experience any warping, some sanding or shaving will be required around the inner edge to make the glass fit inside.I've printed everything in TPU with an previous version and was happy with it so that's always an option as well, never had TPU warp on me. It also helps with durability since layer adhesion at least with what I used was much better than PLA or ABS/ASA. Stuff is basically indestructible.&nbsp;Installing the light stripAs far as attaching the light strips, I cut mine in 4 parts (beware they are not all the same length) and soldered them with small pieces of electrical wire, then hot glued each of the corners where the wires go around in case the adhesive back fails and to also to add some strain relief to the solder points. It can be difficult to solder to the strips, I have seen people successfully bend COB LED strips around the corners but I think cutting it has the cleanest look. I also put some black electrical tape around the solder points to keep it looking clean.LED Strip I used from amazon <a href="https://www.amazon.com/gp/product/B09YRCZ3WR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow">HERE</a> (I just chose the plain 1.5m 5000k without the RGB for the added brightness and ease of soldering but feel free to get what you prefer)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/user/767965805/draft/2023-09-27_8x7tv3kpur2j.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/767965805/draft/2023-09-27_yeylih54amv4.jpg"></figure>&nbsp;Why did I make it thicker?When using the default presets for ABS or ASA on bambu printers, the speed it goes and the cooling it uses severely limits the layer adhesion. This is fine for little things here and there but with thin walls like in the original model I remixed, it has a habit of just snapping off. I'd rather not have to replace parts after gluing and soldering stuff into the printed model so I decided I needed to make it stronger.

Bambu X1/P1S Chamber Light LED Riser Upgrade (Reinforced)

Bambu X1C

3DFolio

If you enjoyed this, please leave a like and review!&nbsp;This model includes local roads, and building information.&nbsp;If you are importing with a STL, please note that the file may need to be cleaned up in your preferred slicer program. If you are importing the .3mf file directly into your Bambu slicer, you can skip this step.&nbsp;This model is a work in progress. I'll add additional profiles here when changes occur

Great Pyramid of Giza - Tiny 3D City 

Architecture

CATIAV5FTW

1/2/2024 UPDATE: I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the Jet Engine Model for Kit-006 print profile. This is the latest and greatest profile, so I highly recommend using this from now on. The parts from the previous release, now renamed (OLD) Jet Engine Model for Kit-006, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.&nbsp;Overview:A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!&nbsp;I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.&nbsp;Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.&nbsp;===The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener">Jet Engine Model Components Kit - 006</a>. <ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:<ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener">PLA Basic Jade White</a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener">PLA Basic Blue-Gray</a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener">PLA Basic Black</a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener">PLA Metal Cobalt Blue Metallic</a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener">PLA Metal Iron Gray Metallic</a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.) ===&nbsp;Good luck and happy printing! Message me with any questions!

3D Printable Jet Engine

DIY 

AnnIsMax俺叫Max

&nbsp;This mouse uses a “VXE R1 SE” gaming mouse's internal electronics as the inner workings.本项目使用 “VXE R1 SE” 鼠标的电路板作为内核&nbsp;Extra hardware: 额外五金件：&nbsp; (3x) m3*6 hex screw (3x) m3*6 内六角螺丝钉 (3x) m3*4*4.2 heat set inserts (3x) m3*4*4.2 滚花螺母&nbsp; (1x) Omron B3F-4055(12*12*7.3) tactile switch (1x) Omron B3F-4055(12*12*7.3) 轻触开关 (2x) Omron B3F-6052(6*6*7.3) tactile switch (2x) Omron B3F-6052(6*6*7.3) 轻触开关&nbsp; (many x) Mouse Feet (任意x) 鼠标脚垫&nbsp;&nbsp;Installation Tips:安装提示：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_db0a1801d4a4c.jpg"></figure>Cut away the protruding “flag shaped” bit from the 6*6 tactile switches.将6*6 轻触开关上的“旗型” 突起如图所示修剪掉&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_d02c743011195.jpg"></figure>Insert tactile switches as shown. （solder the wires onto the switches before hand）如图所示安装开关 (先将导线焊至开关上会更容易安装)&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_0bcc53a4ce9a7.jpg"></figure>Add heat set inserts in to the Body parts as shown.在背部底端3个孔洞处用烙铁加上滚花螺母&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_0987064e7ed1d.jpg"></figure>Cut away all excess bits from the encoder as shown in the picture.Install the encoder in the opposite direction comparing to the the original direction on the board. (protruding blue ring should face the wheel)将编码器取下后切除多余的金属部分（结果见图）安装编码器时旋转180度（侧面突出的蓝色环应接触滚轮）&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_debeceb9f7ed1.png"></figure>&nbsp;Because the encoder has been turn around, exchange the wiring of the “A” and “B” Pins (or the wheel will scroll the screen in the opposite direction)因为编码器旋转了180度， “A” 和 “B” 脚的接线需要调换（不然滚轮输入会反过来）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/351432/2024-01-04_ef1be30b92a2a.jpg"></figure>Install the micro switches here.将微动开关安装在篮圈所示位置&nbsp;Align these 3 holes from the logic board to both the body and base parts then tighten with screws from the underside.将底板，背板和电路板上的红圈处3孔对齐上螺丝。&nbsp;&nbsp;Misc:&nbsp;2 sizes of side buttons were provided, install them to your liking.侧边前进后退按键提供了2个高度，可根据自己喜好打印安装

Max's Ergonomic Mouse (using VXE R1 SE's internal electronics)

Electronics

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">

Double Action OTF Knife/Comb

Random

KefmaDE

"4 IN A ROW" is a strategic two-player board game, also known as "Connect Four." The game board consists of six rows and seven columns, where players take turns dropping their tokens. The objective is to be the first to connect four of one's own tokens horizontally, vertically, or diagonally. Players must strategically plan their moves to either create their own four-in-a-row or simultaneously block the opponent. I designed the game in a compact box, making it convenient for on-the-go or travel gaming.

4 IN A ROW - Travel Edition

Games

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

Model Cars

Jaatinen3D

Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a chain of appropriate length (I&#39;m using length 14, it feels nice) and attach the Ring and End to the chain. Ready to spin!&nbsp;Prints nicely without supports!&nbsp;---Check out the new <a target="_blank" href="https://makerworld.com/en/models/151261" rel="nofollow noopener">Ringchaku Wall Hook</a> to display and store your Ringchaku!---&nbsp;---Update 2024-19-01: I&#39;ve added three smaller versions of the ring: 22mm, 20mm and 18mm. Let me know if you need even smaller!---&nbsp;<figure class="media"></figure>&nbsp;<h3>Check out the special editions too:</h3><figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-22_5e3d7929a825c.jpg"></figure></td><td>Valentine&#39;s Day Edition NEW! FREE!</td><td><a target="_blank" href="https://makerworld.com/en/models/152374" rel="nofollow noopener">MakerWorld</a></td></tr><tr><td style="padding: 0px"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_491754b41e8de.jpg"></figure></td><td>Thanksgiving Edition</td><td><a target="_blank" href="https://than.gs/m/964381" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629286" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_91dffdceaa6a6.jpg"></figure></td><td>Mace Edition</td><td><a target="_blank" href="https://than.gs/m/969867" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629291" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_be36c48d89bf9.jpg"></figure></td><td>Blade Edition</td><td><a target="_blank" href="https://than.gs/m/973197" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1631360" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_ab638babd38a6.jpg"></figure></td><td>Christmas Edition</td><td><a target="_blank" href="https://than.gs/m/975683" rel="nofollow noopener">Thangs </a>/ <a target="_blank" href="https://cults3d.com/:1648164" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_a4dc599028daf.jpg"></figure></td><td>Kusarigama Edition NEW!</td><td><a target="_blank" href="https://than.gs/m/992237" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1711103" rel="nofollow noopener">Cults</a></td></tr></tbody></table></figure>&nbsp;Don&#39;t forget to check out my Instagram and YouTube channel for more interesting projects!<a target="_blank" href="https://www.instagram.com/jaatinen3d" rel="nofollow noopener">https://www.instagram.com/jaatinen3d</a><a target="_blank" href="https://www.youtube.com/@Jaatinen3D" rel="nofollow noopener">https://www.youtube.com/@Jaatinen3D</a>

Ringchaku Spinning Fidget Toy

Fidget

M3D_Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu White Transmission Distance: 5Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #14 (1.2mm) swap to White for the rest.

RS6 Avant 2DArt (Hueforge)

Pictures

LemonArts

Makita 18V Battery Wall Mount for 3 Batterys.01.11.2023 Update NEW VERSION with more space between the Batteries