woodworkingstl

RB_Project

Libellula da ritagliare e assemblare senza collaalla coda andrebbe applicata una goccia di colla per renderla stabile

Dragonfly_3D

household 

masks

AP Engineering

This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print.3 parts to print:1x “G29_Center”1x “G29_Handles_Back”1x “G29_Handles_Top”&nbsp;For assembly, check this video: <figure class="media"></figure>&nbsp;Original model belongs to Flashbang: https://www.thingiverse.com/thing:4177079

Logitech G29 - F1 Style Steering Wheel (Center part in 1 piece)

games

clockspring3d

I really love that 3D printing lets us create tools and solutions for anything and everything!If you're making a full-size box or picture frame, you'd use a mitre box or something similar. Cutting angles precisely needs tools and jigs, or things just don't look good. But what if you're a miniatures artist?That's where this miniature mitre cutting jig comes in! Sized to take a 1mm blade (e.g. standard utility knife), slots are arranged at 30, 45, 60 and 90 degrees.You might also be interested in <a target="_blank" href="https://www.printables.com/model/507966-mini-craft-corner-clamp" rel="nofollow noopener">https://www.printables.com/model/507966-mini-craft-corner-clamp</a>Have fun!

Mini Craft Miter Box

tools

gwenhidwy

**Update 1/3/2024**I noticed a small number of people having issues with fit of the trays. I fixed a small defect that may have been causing this. I have replced the old versions with V2.&nbsp;**Update 12/29/23**I added a profile for the A1 Mini, with trays of slightly reduced width and length.&nbsp;**Update 12/20/23**I added a single profile with multiple plates.&nbsp;I use these to sort lego when building or sorting bulk but they could be used for just about anything.There are three different sizes in this set plus a lid and they stack:<ul><li>Large</li><li>Medium</li><li>Small</li><li>Lid</li></ul>I also have plates with multiple copies of the smaller trays on the build plate, for connivence<ul><li>Medium x 2</li><li>Small x 4</li></ul>These can be printed without supports.&nbsp;Please checkout some of my related models:<figure class="table"><table><tbody><tr><td><h2><a target="_blank" href="https://makerworld.com/en/models/122893#profileId-132376" rel="nofollow noopener">Bento Stax</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/61141#profileId-63332" rel="nofollow noopener">Nesting Trays - 2U Tall</a></h2></td><td><h2><a target="_blank" href="https://makerworld.com/en/models/16636#profileId-15428" rel="nofollow noopener">Stackable Funnel Trays</a></h2></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/350807/2024-01-04_b544c2c49c185.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/350807/2024-01-04_375d3f7708a92.jpeg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/350807/2024-01-04_1e3a115bbe906.jpeg"></figure></td></tr></tbody></table></figure>

Nesting Trays

organization 

fay3dlab

&nbsp;A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini bicycle card came to fruition..The whole kit card was modelled using Tinkercad and 3d printed using Bambulab P1p..Assembly video can be found here: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=LcFwJKVBVuo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/LcFwJKVBVuo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><a href="https://www.buymeacoffee.com/fay3dlab" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/arial-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 109px !important;" ></a>

Mini bike kit card

models & toys

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

household

masks

games

tools

organization

models & toys

office