wokaomccc

matt.pongratz

Printed in PLA 0.2 Layerheight with 15% Infill. Should fit very tightly, but 2 magnets can be used to secure the inlay. If you opt for using magnets use 10x1.5mm

Magnetized Box

apex3D

Hi,I designed imho improved version of spool holder for P1P that works well with Vision enclosure (might work with X1C but did not test it since I do not have the machine).V3 UPDATE:<ul><li>Due to plastic creep I supported it on the top</li><li>Merged 2 parts into 1!</li><li>Utilizes the original metal holder</li><li>still 0 supports and easy prints</li></ul>MAIN FEATURES:<ul><li>Similar dimension to the original</li><li>Less bending of teflon tube thanks to improved geometry</li><li>Using coupler at the exit so the tube doesn't fall of</li><li>Space for bolt head when using Vision enclosure (had issues with my bolt)</li><li>2 slots for boden coupler end or small tube - ideal when you want to print from drybox</li><li>Connect dry box from</li></ul>To make it work you will need:<ol><li>M3 bolts</li><li>Pneumatic fitting PM - bought from <a target="_blank" href="https://vi.aliexpress.com/item/1005003654126453.html?spm=a2g0o.productlist.main.19.5d7236066YWSHY&algo_pvid=6aa4e9c3-f23a-4272-99b7-c35b930e5c15&aem_p4p_detail=20230405120155352424413154630026916843&algo_exp_id=6aa4e9c3-f23a-4272-99b7-c35b930e5c15-9&pdp_npi=3%40dis%21EUR%210.46%210.35%21%21%21%21%21%402100b78b16807213156356075d06f1%2112000026673004089%21sea%21DE%210&curPageLogUid=zJmFOIHEoywG&ad_pvid=20230405120155352424413154630026916843_2&ad_pvid=20230405120155352424413154630026916843_2" rel="nofollow noopener">aliexpress</a></li></ol>PRINTING:<ul><li>PLA works just fine</li><li>No brim</li><li>No supports</li></ul>

tt

打印机配件