wojteq5

Wojciech Kawa

A Minion on the front of the extruder that rolls one eye while printing.Minion on the front of the extruder&nbsp;Please use my profile for printing as I spent some time on it to make sure the print turns out as good as possible. Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know. If you have printed it, please leave a rating. Before installation, the original front and the rotating element must be dismantled. During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper. When assembling, make sure that the top latches are flush with the top edge before pressing from the front.  If you think that standard hooks are too weak and may break, print a version with reinforced fasteners. You will see details in the photos below.  <figure class="image"><a href="https://www.buymeacoffee.com/wojciechkawa" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2024-01-30_46d010488f47e.webp"></a></figure><a target="_blank" href="https://makerworld.com/it/u/3316073328" rel="nofollow noopener">See my other projects.</a>&nbsp;Assembly instructions below. (same as Funy Face)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-27_739987a587726.jpg"></figure><h3>Version with strong top fasteners.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/493400/2023-12-30_15abccd4d578e.png"></figure>

Minion on the front of the extruder.

A1 mini mods

jogu44

Plug for the mysterious hole&nbsp;3D Print The World. For the people by the people. Allowable for remixes.

A1 mini mods

P1P/P1S mods