臭熊熊

Longracks Labs

<p>Mashup of Dry Pods and Desiccant tray models for using desiccant beads in AMS.</p><p>&nbsp;</p><p>v2 in Raw Model download includes update includes:</p><ul><li>Plate with DryPods (0 degree offset), and trays (same as v1)</li><li>Plate with DryPod at 30 degree offset</li><li>Plate with ‘skinny’ DryPods as needed (with AMS wear preventer, etc.)<br><br> </li></ul><p>Drop a Boost if you are happy with this print!</p>

Dry Pods and Desiccant Trays for AMS

干燥盒

Fyrby Additive

V-Spooler

卷线器

YelTrik Designs - Click FOLLOW

<p>The cable chain that comes with the P1/X1 has only one of these PTFE chain clips to control the PTFE feed tube. Adding two or three of these to the chain keeps the PTFE tube controlled and out of the way of the glass top or side wall of the chamber. Simple to print and install.</p><p>&nbsp;</p><p><strong>Note:</strong></p><ul><li>Install in the open area of the chain link, top of the clip first, and then the bottom clip. Install the PTFE tube once the clip has been installed on the chain.</li><li>Use the filament that meets the demands of your chamber temperatures.  </li><li>Do not install these close to the print head! The PTFE tube near the print head needs to be unconstrained for proper function.</li></ul><p>&nbsp;</p><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/en/u/1072890529" rel="nofollow noopener"><span style="font-size:30px;"><i><strong>Click here to check out other PTFE Accessories</strong></i></span></a></p><p>&nbsp;</p>

PTFE Chain Clips

夹子

radekrac

<p>You can print models while standing.<br>No supports are needed and it is printed nicely using a 0.3 mm layer height.</p><p>Mount on a wall or place on a shelf. Always remove the one that was inserted as the oldest.</p>

Battery tray / holder AA / AAA / 14500

办公

Matthew Ghost

<p><strong>NEW IMPROVED VERSION</strong> <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener"><strong>TILT PHONE STAND V3.0</strong></a></p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(34,34,34);font-size:16px;">The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.</span></p><ul><li>Designed for printing completely <strong>without supported</strong>!</li><li><strong>You will need glue (Superglue for plastics). </strong>It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.</li><li>Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.</li><li>Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.</li></ul><p><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2023-12-16_fe804a401913c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2024-01-10_dac2c51f4fc07.jpg"></p>

TILT PHONE STAND

手机支架

Jorge Rui

<h3>Introduction</h3><p>This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more.</p><p>but it can also be used for anything else, with saving writing material, drawing etc.</p><ul><li>This gray module you see is specific to 100x150mm index-cards (4x6 inches). To get an idea of the dimensions, it allows you to put a little more than 700 cards of 180g/m^2</li></ul><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_xznmnldpwl14.jpg"></figure><p>Of course, in the case of a modular system it is possible to accumulate as many modules as you need, that is, the system will grow according to your needs.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_1adne8yera7t.jpg"></figure><p>You can use colors for each of the groups, thus organizing your workflow.</p><h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_oa9zzg75e1an.jpg"></h4><p>And a new 76,2x127,0mm (3x5 inches) that you can find in “<i>3x5 module.3mf</i>” in files.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_cfcdbdafdbe5d.jpg"></figure><h4>Printing</h4><p>These cards are the second largest, and so as you can see the boxes are not small either (like I&#39;ve said in the beginning, they use almost all the print bed area (PRUSA MK series). You will have to wait a few hours before you can use your slip-box, but you will get it and it look fantastic. If you want other dimensions send a message or change this to your needs.</p><p>It is however a remarkably simple impression, without supports, without anything special. The infill is up to you, the default 15% is ok.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_phzp7i2ry0gj.png"></figure><h2>Change log</h2><p>(<i>26-09-2023</i>) - Added some tabs, maybe they help. Only 2 layer thickness.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_3d743f3b1a109.jpg"></figure><ul><li>Added a 3x5 box to files.</li></ul><p>And a diferente application, board games sleeves and baggies, thanks to <a target="_blank" href="https://makerworld.com/en/@marco.boschetto" rel="nofollow noopener">marco.boschetto</a></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2024-06-27_1e261084396fc.webp" width="1080" height="1440"></figure><h4><strong>Support the designer:</strong></h4><p>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener"><strong>buymeacoffee</strong> </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener"><strong>paypal, </strong></a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</p><p>&nbsp;</p>

Zettelkasten Index boxes (Slip Box)

盒子

Sergej P

<p>🌟 Discover the Ultimate Storage Solution with SKÅDIS box collection! 🌟</p><p>Say hello to an organized life with our premium SKÅDIS storage boxes! Crafted with versatility in mind, our range of boxes comes in sizes of 75mm, 115mm, 155mm, and 195mm, each available in both 60mm and 40mm depths. Mix and match to create your perfect storage setup, tailored to your unique needs.</p><p>Elevate your organization game with our customizable labeling system. With bamboo studio, you can effortlessly personalize labels for each box, ensuring everything finds its place with ease.</p><p>Take your organization to the next level with our universal holders, designed exclusively for SKÅDIS. Attach them to our boxes and unlock a world of possibilities. Securely mount a variety of SKÅDIS accessories, from hooks to containers, maximizing every inch of your storage space.</p><p>Say goodbye to clutter and hello to a beautifully organized home or office with my versatile storage boxes and accessories.</p><p>&nbsp;</p><p>Die SKÅDIS Aufbewahrungsboxen bieten eine vielseitige Lösung für die Organisation von persönlichen Gegenständen, Büromaterialien oder anderen Utensilien in Ihrem Zuhause oder Büro. Mit verschiedenen Größenoptionen, einschließlich 75 mm, 115 mm, 155 mm und 195 mm, sowie Tiefen von 60 mm und 40 mm, können Sie die Boxen kombinieren, um eine maßgeschneiderte Aufbewahrungslösung zu schaffen, die Ihren Bedürfnissen entspricht.</p><p>Die Boxen sind mit einem anpassbaren Beschriftungssystem ausgestattet, das es Ihnen ermöglicht, Etiketten individuell zu gestalten und so die Inhalte jeder Box leicht zu identifizieren. Das Bambu Studio bietet eine einfache Möglichkeit, diese Etiketten zu personalisieren.</p><p>Zusätzlich sind Universalhalter erhältlich, die speziell für SKÅDIS entwickelt wurden. Diese Halterungen ermöglichen es Ihnen, eine Vielzahl von SKÅDIS Zubehörteilen, wie Haken und Behälter, sicher an den Boxen anzubringen, um den verfügbaren Stauraum optimal zu nutzen.</p>

Skadis Box collection

洞洞板

V3 Precision

<p>This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer.  This is a larger sized container than my other design.</p><p>The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick).  The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit.  Might need to super glue the magnets in place.</p><p>The cutaway o n the size serves two functions.  It gives you a recessed handle to grip the poop chute when taking it off.  The angled top of the cutaway helps direct the waste filament across the chute.  Helps to keep the filament from bunching up directly beneath.</p><p>&nbsp;</p><p>Filament - I used PLA+ or PLA Carbon Fiber</p><p>Support - Yes; Hybrid, Auto</p><p>Layer - 0.2mm</p><p>Infill - 15%</p><p>3mf file using Bambu Lab Studio (slicer)</p><p>&nbsp;</p><p>UPDATE:</p><p>The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.</p><p>The new design is poop_shoot_L_magnetic_V2</p><p>&nbsp;</p><p>You can find a finished Poop Chute with the magnets on our website www.v3precision.com.</p>

Poop Chute Large Magnetic for Bambu Lab X1

便便盒

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

干燥盒

卷线器

夹子

办公

手机支架

盒子

洞洞板

便便盒

增高架