willia75shop

PCHuDSoN

4 colour painted version so can be used with one AMS.&nbsp;It was difficult to paint as they are lots of edges in the roof tiles for example.As it took a long time, I thought I would upload to help others out.It will still be a long print but worth it as a fantastic model.

American Craftsman Bungalow Birdhouse

Outdoor

emmaginn

Yeti Rambler Can Cooler inspired koozie. With a low infill of around 10% it seems to work pretty much just as good as the Yeti version since the cooling relies on the air insulation (double wall). The top fits perfectly on the Yeti one as well in case you lost your top. Hope you like it. Enjoy!&nbsp;Update 06.24.24: I updated the lid to be a little thicker and more secure

Yeti Can Cooler Inspired Koozie

Kitchen

Lexx_3D

This is the inner pot for the Twisted Flower Pot I remixed (by alecs.forms). It has a waterindicator to see how much water is left. You have to stuff the underpart with styrofoam so that it floats. But be careful because this part is very fragile.Before planting:Please make sure that the rod is up to the top line of the cap when the water level is full (water up to the top edge of the inner pot). If this is not the case, then measure approximately the height of the rod from the cap and feel free to contact me! I will send you a new cap.stl with your measurements.Dimensions:<ul><li>inner diameter at the top: ~136mm</li><li>inner diameter at the middle part: ~112.7mm</li><li>inner height: ~106.5mm</li><li>wall thickness: 1.2mm</li></ul>Settings:<ul><li>layer height: 0.2mm</li><li>line width: 0.42mm!</li><li>wall loops: 3</li></ul>Note:As you scale the pot the wall thickness will also change. Feel free to contact me for other Dimensions!!&nbsp;Feel free to upload your makes!

Outdoor

Kitchen

Plants & Garden