Wieger

JamesThePrinter

This set of squares all rotate independently. Each face has a different pattern to give a varying tactile sensation as you twist and play with it:<ul><li>Spiral</li><li>Sunburst</li><li>Wavy Lines</li><li>Stripes</li><li>Bubbles</li><li>Hexagons</li></ul>&nbsp;This was designed with 0.25mm clearances, so it prints easily with no special settings.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are:<ul><li>MatterHackers Quantum Green Raspberry PLA</li><li>Amolen Purple Blue PLA</li><li>polymaker PolyTerra Pastel Banana PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Fidget Squares

Fidget

3Dimension Customs

SUPER NICE spinning keychain rack with 608 roller bearing for smooth spinning operation. Tight tolerances for sturdy construction. Each tier uses one bearing prints in 3 plates spins beautifully and doesnt wobble when weight is not centered.

Spinning Keychain Display (Stackable with bearings)

random stuff

Willi 3D

Create your own battle droid army and take over the galaxy!&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD remix of my B1 battle droid. I changed the design in many places to make it easier to assemble and allow the figure to stand and pose on its own. Check out the compatible <a target="_blank" href="https://makerworld.com/de/models/13746?profileId=13457" rel="nofollow noopener">STAP speeder bike</a>!Scale 1:9 (90% for 1:10)&nbsp;Improvements:- improved connection points- easier to assemble- improved stand and pose of the figure- Blaster *pio* *pio*- kit cardsMay the force be with you!Roger roger!&nbsp;Update:(21/08/23) <ul><li>optimized base</li></ul>(03/08/23) <ul><li>optimized size for smaller printer and better to print fingers</li><li>addet base and insert to chest </li></ul>(26/07/23) <ul><li>optimized fit of head, thin, pipe, backpack and blaster</li><li>addet thumb to forarm, hole for blaster in backpack</li></ul>(13/07/23) <ul><li>optimized fit of ankle and blaster</li></ul>&nbsp;Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult.It is better to rotate the knee and elbow joints than to push them into place.In order to replicate the design of the B1 battle droid as closely as possible, I was forced to make some parts very fragile. Please be ready to reprint parts in case of breakage. Separate parts are located in the respective folders.

Kit Card B1 Battle Droid Star Wars 

Kit cards

ENIQUE3D

Extremely flexable snake skeleton.&nbsp;really satisfying sounds, incredibly fun to play with&nbsp;34&#34;/86cm long. approx 16 hour print. 120% scale is a full build plate and what I printed.&nbsp;beware going lower in scale as the back end can be small and likely to fail.&nbsp;Also be cautious with silk pla and the ball joints. They do seem to work better in normal pla or matte. &nbsp;&nbsp;

Articulated snake skeleton 

Flexi

mingshiuan99

Practical and cute dinosaur bookmarks. Easy to print.

Cute dinosaur bookmark 03

bookmarks

thatcaddad

&nbsp;I made a good amount of changes to the Fallout Mini Nuke Deck Box V1 I designed so I&#39;m creating this to make the listing alittle cleaner and easier to figure out what you need to print. Here is the link to V1 if you would like to check it out. <a target="_blank" href="https://makerworld.com/en/models/212530#profileId-232194" rel="nofollow noopener">https://makerworld.com/en/models/212530#profileId-232194</a>&nbsp;This deck box holds 100+ double sleeved cards and 2 storage spots for dice. All connections screw together. Below is a youtube video showing how all the pieces fit together.&nbsp;Check out the Mini Nuke Life counter I made as well. <a target="_blank" href="https://makerworld.com/en/models/484651#profileId-397051" rel="nofollow noopener">https://makerworld.com/en/models/484651#profileId-397051</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444126/design/2024-06-04_cb35a24d5816a.jpg"></figure>&nbsp;Here are some painted “mini” nukes that some of the community have done from the V1 version.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444126/design/2024-04-26_e935d7aa8f028.png"></figure>If you like this design please think about supporting me by sending me a boost token or possible buying me a coffee.<a target="_blank" href="https://buymeacoffee.com/thatcaddad5" rel="nofollow noopener">https://buymeacoffee.com/thatcaddad5</a>

MTG Commander Deck Box Fallout Mini Nuke V2

D&D & Card games

Sevro

Pendant in shape of stylized skull arrowheadPrint profile have 0.08 layer thick, and ironing. It is best possible quality. After printing it need to a little sanding to get perfect surface.

Arrowhead Skull Pendant

Cool stuff

jdlap13

Deathstar Gearshifter for car. The thread on the bottom fits a 2011 Rav 4 gear shifter. The thread test part can be used to check if the threads will work with your car.

Deathstar Gear Shifter

Auto

Travis

I&#39;m a big fan of the Fallout game series. The latest release of Amazon&#39;s Fallout series energized the nerd inside of me to create this bit of my very own Vault-tec Pip-Boy techiness to dress-up my Apple Series 7 Watch (45mm).&nbsp;I included pics of the process to install the buttons and insert the button-side of the watch into the Pip-Boy before snapping the rest of the face onto the watch. The included print profiles include snug supports for a few overhanging areas and those are quick and easy to remove without needing tools. Please note that one profile is for a standard 0.4mm nozzle while the other is for a 0.2mm nozzle. The 0.2mm nozzle print profile includes updated tolerances for the supports since they need to be smaller to accommodate the .22mm layer width and 0.1mm layer height.&nbsp;Enjoy and let me know what you think.&nbsp;I used the Facer app for the Pip-Boy screen: <a target="_blank" href="https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179" rel="nofollow noopener">https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179</a>!!! ULTRA version here: <a target="_blank" href="https://makerworld.com/en/models/477933#profileId-389029" rel="nofollow noopener">https://makerworld.com/en/models/477933#profileId-389029</a><h4>You can try uniformly scaling the entire model (with buttons and knobs selected) to the following percentages based on your watch size:</h4><ol><li>44mm: scale to 97.77%</li><li>42mm: scale to 93.33%</li><li>41mm: scale to 91.11%</li><li>40mm: scale to 88.88%</li><li>38mm: scale to 84.44%</li></ol>EDIT: 5/1/2024I uploaded a 44mm version that should fit the Apple Watch SE quite nicely and added two new print profiles to support it. One profile is for a 0.4mm nozzle and the other is for a 0.2mm nozzle, specifically on an A1 mini, but should work on other Bambu Lab printers.&nbsp;EDIT: 5/6/2024I created a version 2 that includes knobs, by popular request.  The knobs have a small amount of threading to keep them firmly attached.&nbsp;EDIT: 5/20/2024I added a new print profile with the version 2 model scaled according to the chart from above.  The print profile is the “38mm to 45mm v2” and there&#39;s a profile for a 0.4mm nozzle (default nozzle size on Bambu printers) and the 0.2mm nozzle for those of us playing with finer detail.

Pip-Boy for Apple Watch

Fallout

Marckkill

Gladiator Helm Keychain

keychains

STL - Factory

A few things have been changed and improved, it's version 88 from the good old days&nbsp;<h2>Wall Holder:</h2><h2><a target="_blank" href="https://makerworld.com/en/models/247091?from=search#profileId-263419" rel="nofollow noopener">https://makerworld.com/en/models/247091?from=search#profileId-263419</a></h2>&nbsp;&nbsp;Instructions:<a target="_blank" href="https://sketchfab.com/3d-models/3d-printable-mg-34-ce8a6e64b78143568ac80c3f740f29e4?fbclid=IwAR18bfXdZqeiEsMUjnfyjidN1V5NK6Ht-_57ec4NdoqjdFjp8nBzZvy7niM" rel="nofollow noopener">https://sketchfab.com/3d-models/3d-printable-mg-34-ce8a6e64b78143568ac80c3f740f29e4?fbclid=IwAR18bfXdZqeiEsMUjnfyjidN1V5NK6Ht-_57ec4NdoqjdFjp8nBzZvy7niM</a>&nbsp;

MG34 German Weapon/ DLT-19 Heavy Blaster Star Wars

star wars

Mr Hye

Don't Panic light up sign from Hitchhikers guide to the galaxy!Simple and fairly quick print. &nbsp;Printed using Bambu Red, Yellow, and Black.&nbsp;The hole in the back is 4.5mm and DOES fit the bambu LED light strips. It WILL take a bit bending/curling the strip to feed it through, but it does fit….Just barely, but thats the idea. &nbsp;

Don't Panic Light Box

light boxes

vangen81

Bad To The Bone Wireless Mouse Designed to fit with Bambu Lab&#39;s Wireless Mouse Components Kit 002 (<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>) for a simple and easy assembly. In addition to this top shell, you will need to print &#34;Wireless Mouse Botton shell V2.0&#34; from Bambu Lab <a target="_blank" href="https://makerworld.com/en/models/13716?from=search#profileId-14573" rel="nofollow noopener">https://makerworld.com/en/models/13716?from=search#profileId-14573</a> This top shell is printed in dual color with AMS, but feel free to print in single color to save some print time, Its a long print with over 600 color changes. Filaments i used is Polymaker PolyTerra PLA - Charcoal Black for the black and Polymaker PolyTerra PLA - Peanut for the bones.No additional support is required, Optional mousepadAlso made a mousepad to fit with the bone theme. download &#34;Optional BTTB Mousepad&#34; if you like it. If you like what you print, you can always press the little rocket to give me a boost, i will sure need it to make more 3D models and hopefully get better at designing.

Bad To The Bone Wireless Mouse

alexandrecolla54

Rehausse pour cafetiere Delonghi Magnifica S &nbsp;J'ai repris le modèle sur Cult <a target="_blank" href="https://cults3d.com/fr/mod%C3%A8le-3d/maison/bean-tray-extend-for-magnifica-s" rel="nofollow noopener">https://cults3d.com/fr/mod%C3%A8le-3d/maison/bean-tray-extend-for-magnifica-s</a> .&nbsp;Merci au créateur du plan car c'est vraiment top.&nbsp;J'ai imprimé sur X1C en PETG transparent &nbsp;&nbsp;

rehausse café delonghi magnifica s

home

bonfiggy

Perfect fitting antivibration feet printed in TPU with 15-20% infill for best results. No supports needed! Seems to help a good bit as well with the shaking/noise and a lot less printer wobble as well :)

Bambu Lab P1P/P1S/X1/X1C Anti Vibration Feet

Printer

Kopp3D

A complete Pokémon Christmas Village for your holiday mantle! All models are made from scratch in Onshape using Pokémon 3rd generation games sprites for reference and tested on an X1C. Designed to print with minimal color changing waste. All items snap together, no glue or painting required! The buildings have a hole with an optional plug in the back for string lights. ONLY USE LED LIGHTS OR YOUR PRINT WILL MELT.&nbsp;This is a project a month in the making and includes the following holiday decorated models:<ol><li>Pokémon Center</li><li>Pokémon Shop (choose your region's sign: SHOP or MART)</li><li>Pokémon Gym that can be used with or without the roof slide-in. You can put an LED strip on the walls to make it look like stadium lights!</li><li>A general sign</li><li>A Pokéstop with gifts (not 3rd gen but it's a cute addition to your town if you want it!)</li></ol>If you would like me to add a model to this village, feel free to ask in the comments. Can't promise anything, but if I make one, I'll upload it here and reply to your comment.&nbsp;Update: I have now uploaded non-winter versions of these models! You can find them here: <a target="_blank" href="https://makerworld.com/en/models/95737#profileId-102068" rel="nofollow noopener">https://makerworld.com/en/models/95737#profileId-102068</a>