whodatxevg

Josh Kenzer

This is a small bowl that is squarish with rounded corners. Very simple quick print.

Small bowl 57.5 mm wide and 30mm tall

Chicken Bowls

Robjohnsilvers

recommended to print with extra perimeters and infill to prevent breaking

Allen Wrench T Handle

Tools

ozenz3D

Hello, &nbsp;My First HueForge : Portgas D.AceStart with BlackAt Layer #9 Swap to Red (0.80)At Layer #14 Swap to Yellow (1.20)At Layer #21 Swap to White&nbsp;Do not hesitate to post your print.&nbsp;Good print !&nbsp;&nbsp;

One Piece Ace Hueforge

Hueforge 

YeetYeet

Break action rocket launcher that shoots rockets propelled by co2 cartridges. Rockets are held in reusable shells and upon firing, they deploy stabilization fins thanks to rubber bands. The rockets use 12g co2 cartridges which are often used for airsoft. That makes them quite affordable and available in any airsoft store. Launcher features picatinny rails on top and bottom of the barrel, making it possible to mount accessories like scope or laser. For more information and assembly guide see assembly.pdf in files.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=DbaiUHjH5wk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/DbaiUHjH5wk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> BOM:<ul><li>M3x8 7pcs</li><li>M3x60 2pcs</li><li>M3x35 2pcs</li><li>M3x25 1pc</li><li>M3x22 1pc</li><li>M4x25 1pc</li><li>M4x22 1pc</li><li>M4x10 4pcs</li><li>M4 nut</li><li>Springs 5,5mm OD, length at least 30mm (<a target="_blank" href="https://www.hornbach.cz/p/pruzina-tlacna-5-5x38-zinek-bily-baleni-8-ks/6488171/" rel="nofollow noopener">Springs from HORNBACH</a>)</li><li>Torsion spring - wire diameter: ~2.5mm, inner hole diameter: 8mm, outer diameter: 13.5mm, height: ~13mm (I got mine from <a target="_blank" href="https://www.globus.cz/cela-nabidka/produkt-01012794000" rel="nofollow noopener">this clamp</a>)</li><li>Nail 2.8mm x 40 (<a target="_blank" href="https://www.hornbach.cz/p/hrebik-do-krytiny-2-8x40-bez-pu-2-5-kg/8718694/" rel="nofollow noopener">HORNBACH link</a>)</li><li>12gram non threaded co2 cartridges</li><li>rubber bands  </li></ul>For additional types of rockets or if you want to create your own see <a target="_blank" href="https://www.printables.com/model/766344-co2-rockets" rel="nofollow noopener">Co2 rockets</a> (<a target="_blank" href="https://makerworld.com/en/models/188133" rel="nofollow noopener">Makerworld link</a>) In the files section you can find honing tool. This is not needed but can be used to smoothen the inside of the barrel. Simply glue sandpaper to it and insert 8mm tube into the center. Mount it onto a drill and use it to smoothen the barrel. UPDATE: Added shorter 167mm barrel so it can be printed on prusa mini or A1 mini. Thanks to <a target="_blank" href="https://makerworld.com/en/u/335516679" rel="nofollow noopener">@Ice_Maniac</a>, who found the correct set of springs and clamps on amazon: <a target="_blank" href="https://www.amazon.co.uk/dp/B0BWY3TY1K?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Clamps from amazon</a> <a target="_blank" href="https://www.amazon.co.uk/dp/B00W93X2IS?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Springs from amazon</a>

Co2 rocket/grenade launcher

Airsoft 

bike

Bambu Lab

The 3D model is a specialized tool designed for use with Bambu Lab 3D printers. The tool is a film sticking hand tool, which assists in the process of adhering a film to the printer's build plate. The tool is expertly crafted to provide a comfortable grip and precise control, making it easy to handle and use for prolonged periods.&nbsp;Below is the instructional video on how to use this tool.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=W1EMD77gOkQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/W1EMD77gOkQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Bambu Film Sticking Fixture

Printer Upgrades

michaelq

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easy removable.You need to remove the small tube part in one of the holes of the FilaDryer to have a better angle of the PTFE tube into the dryer, just push it out. You need the following parts.<ul><li>1x PC4-01 Bowden Connector</li><li>A piece of heat-resistant double-sided foam tape (3M VHB is recommended).</li></ul>

Sunlu FilaDryer S2 PTFE Adapter

Dryer

Asdfgasdfg

Starter handle for rope start engines. Max diameter of rope is 5mm. I printed this in carbon fiber nylon but that might be quite overkill, however if you are gonna use it in hot summer weather you might not want to use simple PLA with low vicat softening temperature. It might work I just didnt want to risk it, I got nylon so rather use it than be forced to dig out the cord from the engine when I want to cut my lawn.Printed with 0.4mm nozzle and 0.2mm layer height, no need to be fancy. Might wanna pump up the infill if you got a lot of force in your pull.

Starter handle

Later

squinn

This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches. The strong & stackable design allows you to meet whatever height is needed.&nbsp;This is an easy print that requires no supports, and the STL is oriented as it should be for printing. Three heights are available at 11 cm, 16 cm, and 21 cm tall (the one shown in the pictures is the shortest of the three). All are 10 cm wide, but this model should also easily support scaling as well if you'd like a different size.