wgarcia

Eleazar 3DinPlastic

Poster of the classic Super Mario game to print in full colour, you can use the m600 command or several different gcode files, whatever you prefer, even a multi-extrusion system if you have one.Cartel del clásico juego Super Mario para imprimir a todo color, puedes utilizar el comando m600 o varios archivos gcode diferentes, lo que tu prefieras, incluso un sistema multi-extrusión si posees uno.

Super Mario Singboard

Mario Bros

thesurix

This is compact version of the original model. It has more compact size compared to previous version. You can pick one of the following versions:<ul><li>19mm (22mm stick)</li><li>27mm (29mm stick)</li><li>28mm (32mm stick</li><li>34mm (37mm stick)</li></ul>Print settings: PLA, 2 walls, 25% gyroid infill&nbsp;

Broom stick holder, Shovel holder, Garden holder

organization

jarvizar

Large Square version of my smaller <a target="_blank" href="https://makerworld.com/en/models/95824#profileId-102145" rel="nofollow noopener">Midtown Manhattan miniature</a>!&nbsp;Modeled in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> add-on.&nbsp;Notable included landmarks:<ul><li>Empire State Building</li><li>Times Square</li><li>Madison Square Garden</li><li>Chrysler Building</li><li>Grand Central Station</li><li>Rockefeller Center</li><li>Bryant Park + New York Public Library</li><li>Hudson Yards + Vessel</li><li>And much more</li></ul>Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Larger version of Manhattan including the East River & Hudson River: <a target="_blank" href="https://makerworld.com/en/models/111838#profileId-119762" rel="nofollow noopener">https://makerworld.com/en/models/111838#profileId-119762</a>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try or lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.&nbsp;Framing Details&nbsp;This model measures almost exactly 8.5x8.5in (217.2mm X 217.2mm) and should fit most 9x9 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs, but if the model is shrunk too much smaller features such as roads and vegetation might too small for the slicer to recognize. I plan on uploading an even larger version in the future without these details for more freedom with scaling and sizing.&nbsp;Personally I used this cheap frame from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C9GMB1X8" rel="nofollow noopener">https://www.amazon.com/dp/B0C9GMB1X8</a>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;If you are interested in selling my models, see my <a target="_blank" href="https://www.patreon.com/Jarvizar" rel="nofollow noopener">Patreon</a> page for a commercial license.&nbsp;

New York City Manhattan Square 3D Miniature

MakerVerse Designs

<h2>Updated Version available (V4):</h2><h3><a target="_blank" href="https://makerworld.com/en/models/485576#profileId-398072" rel="nofollow noopener">https://makerworld.com/en/models/485576#profileId-398072</a></h3>---------------------------------------------------------------------------------------------------------------A print-in-place slim wallet that offers space for 7 cards and a drawer for cash. I looked for a long time for a wallet that had enough space for cash, but I couldn&#39;t find one so I made this one myself.  This ist the Updated Version of Slim Wallet (V2)<ul><li>Now its print-in-place so you have to print only two parts and dont have to stop the print</li><li>I added a lever to securely open and lock the cards so that they don&#39;t fall out</li><li>I reworked the drawer mechanism so that it lasts better</li></ul>Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Slim Wallet (V3) - print in place

Gadgets

123cut

Tiny, simple, and handy: I love it!Sometimes, you just need an extra screwdriver, and if you're like me, you have hundreds of little hex screwdrivers lying around that never seem to wear out. Enter the Micro Screwdriver – a perfect solution.With a small and unassuming handle, it makes these little tools incredibly useful without taking up much space in your drawer or pocket. A reliable companion for all your screwdriving needs! This box was created for these screwdrivers. I recommend printing them; they are fantastic. <a target="_blank" href="https://makerworld.com/en/models/135792" rel="nofollow noopener">micro Screwdriver BOX by 123cut - MakerWorld</a>

Micro Screwdriver KIT

Tools

agepbiz

<a target="_blank" href="https://www.instagram.com/p/C0ZsZbDrwg0/" rel="nofollow noopener">https://www.instagram.com/p/C0ZsZbDrwg0/</a>&nbsp;What if Blue Angels used F14?! Tiny 3d printable print-in-place and articulated f14 in colors inspired by the Blue Angles! The built in wingtip support breaks of with a satisfying snap and leaves a nice clean edge&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>Printsettings:No support No raft 0,16mm layer height&nbsp;

Tiny Multicolor Jet Fighters - Print-in-place and Articulated

Toys

theArchitect

Elevate your minifig display game with this revamped hexagon design tailored for larger and more intricate minifigures.Key Features: - Scaled Up Design: Perfectly sized to house larger minifigures, while maintaining the ideal wall thickness. - Baseplate Upgrade: Transitioned from a 3x4 baseplate slot to a more spacious 4x4 baseplate slot, allowing for additional props and dynamic minifigure posing. (Please note: 4x4 baseplate not included) - Enhanced Connectivity: Newly designed connections offer tighter tolerances for a more secure fit. - Seamless Mounting Solution: With a closed-back hexagon design, these are optimized for double-sided Tesa powerstrips, ensuring a clean display on your wall.Crafted with attention to detail, this design will surely make your minifig collection shine. Enjoy building and showcasing!  UPDATE - 28 December 2023<ul><li>added a bunch of new configurations to save on material: 2, 3 and 4 combos.</li><li>added mounting versions for each</li><li>added closed versions for each for those who don&#39;t want to see the wall behind :)</li></ul>UPDATE - 8 April 2024<ul><li>added 4x3 versions for each hexagon so you can use the provided baseplates. I&#39;ve kept the outside dimensions the same so all versions are compatible and can be mixed. </li><li>Renamed to Brick Minifigure Hexagons because… yeah :) </li></ul>&nbsp;

Brick Minifigure Hexagons

lego

FlorinV

Update 08.12.2023: Thank you all for the appreciations! Because of that, I worked on a version with folding temples. Here is the new improved model for who wants them folding (and other changes, like one plate print with embedded logo, a bit more strength etc):<a target="_blank" href="https://makerworld.com/en/models/86474#profileId-92689" rel="nofollow noopener">https://makerworld.com/en/models/86474#profileId-92689</a>&nbsp;Enjoy !<ul><li>easy and fast to print</li><li>easy snap in of the temples</li><li>smooth fit on the nose</li><li>You can see through them, but looks all black</li><li>THUG logo :)</li></ul>&nbsp;

Thug Life Glasses 

wearable

Emvi 3D

180° Print in Place hinges

printer parts

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I provided in the print profile description. I cannot guarantee the quality of any print profile that hasn’t been uploaded by me.&nbsp;<ul><li>Pokeball Upper</li><li>Pokeball Lower</li><li>Pokeball Top Shell</li><li>Pokeball Bottom Shell</li><li>Pokeball Button</li><li>Pokeball v2</li><li>Pokeball Stand</li><li>Great ball</li><li>Ultra ball</li><li>Master ball</li></ul>&nbsp;SUMMARY: This is a simple pokeball that I designed to print without any additional hardware, and minimal supports. The intent was to make the pokeball as easy to print and assemble as possible, while remaining tough and functional. If you find any issues, leave me some feedback please.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>6 Wall Loops</li><li>Gyroid Infill</li></ul></li><li>Red and White Pokeball Shell:<ul><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly is done by first gluing the top shell and bottom shell to the pokeball internals. There’s a small square tab to help align the pieces. Once the glue is dry, slide a small piece of filament through the hinge while holding the two halves together. Cut the ends flush to the pokeball. I add a drop of glue to the outside pieces of the filament since the center hinge piece is the only one that needs to rotate in order to operate. Finally, glue the button onto the pokeball. There’s a post designed to help align the pieces.&nbsp;The filament piece used for the hinge will be tight, so you might have to take an allen key and hollow out the hole a bit to get it to slide into place.&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/3/2023:Added great ball, ultra ball, and master ball tops. I only added the top because everything else is the same, so I'll include 3 separate print profiles for these.&nbsp;UPDATE 11/26/2023:Added a guide post for the button, revised the connection to fit better, thickened the shells to prevent the banding, added alignment squares to align the shell and internals, added a stand.&nbsp;INITIAL RELEASE (10/19/2023)I created this model because the other Pokeball models I found either used external parts or didn't operate how I wanted. This one is designed to open and close using the button on the front. The button isn't 100% required to open the ball, but the intent was to make it functional so it just makes the ball pop open freely. The inside has a flat spot to aid in aligning the outer shell and make printing easier.&nbsp;

Fully Printable Pokeball Set

Pokémon

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012962/design/2023-11-29_97591cf9b0343.jpg"></figure><h3>__________</h3><h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________  Easy-to-assemble, quick print, kit card of Minecraft Creeper in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>

Minecraft-inspire Creeper Mini Figure Kit/Keychain

Toy Cards

K2_Kevin

<h2>The K2 Clip - WATCH THE VIDEOS BELOW!</h2>The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to &#34;float&#34; on your filament spool while printing. Extra secure storage using the locking center version! NOTE: I recommend taking them off when using the Bambu AMS. &nbsp;⭐️Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;NOTE: All printers are different, and calibrated differently. The K2 Clip has very tight tolerances. Test print one in case you need to scale the X/Y up or down.______________________________________________________________________________________________&nbsp;❤ How-To by FilamentStories ❤  <a target="_blank" href="https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories" rel="nofollow noopener">https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories</a><figure class="media"><oembed url="https://www.youtube.com/watch?v=xv6aaTB9OwY&amp;ab_channel=FilamentStories"></oembed></figure>&nbsp;&nbsp;<h3>JJ Shankles Video: <a target="_blank" href="https://youtube.com/shorts/xuDetHdQee8" rel="nofollow noopener">https://youtube.com/shorts/xuDetHdQee8</a></h3><figure class="media"><oembed url="https://www.youtube.com/shorts/xuDetHdQee8"></oembed></figure>&nbsp;&nbsp;❤ Featured on <a target="_blank" href="https://www.youtube.com/watch?v=koAZ6oNUyHo" rel="nofollow noopener">BV3D: Bryan Vines</a> “3D Printed Tools for 3D Printing” @ 06:15s<figure class="media"><oembed url="https://www.youtube.com/watch?v=koAZ6oNUyHo&amp;ab_channel=BV3D%3ABryanVines"></oembed></figure>&nbsp;&nbsp;<h3>Don&#39;t forget to ❤ Like and ★ Rate!</h3><h3>Q&amp;A:</h3><ul><li>How do I use the K2 Clip?<ul><li>Insert the end of your filament through the center hole and feed the clip around your spool until the end of your filament again meets up with your K2 Clip.</li><li>Press the end of your filament into the top of the K2 Clip.</li></ul></li><li>Why so tight?!?! It&#39;s designed to be tight and hold your filament firmly. The K2 Clip will loosen after some use.</li><li>Why is it a triangle? Triangles are cool! No matter what, there will be a locking point facing up.</li><li>Should I remove the clip while printing? In your AMS, I would, otherwise Heck NO! I took lots of time designing/sizing/shaping/massaging that center hole to float on your spool while printing.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014538/design/2023-11-21_a81da16fabaa3.png"></figure>