Tyson

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

printer addons 

fay3dlab

Here&#39;s a new suspended star wars ship and this time around i&#39;m revisiting one of my famous suspended model the Millennium Falcon..I have just modelled my own version of the Millennium Falcon using tinkercad.. you can watch the fast cut BTS video here  <figure class="media"><oembed url="https://www.youtube.com/watch?v=tF8dECfWOrs"></oembed></figure>So i rewatched the Force Awakens movie again to celebrate may 4th and i got the idea of making a new suspended model for the Millennium Falcon.. so im going to make the frame from debris of the star destroyers.. I got to work on it and i present to you the new suspended Millennium Falcon part2:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460390/design/2024-05-11_6dda8df1a4b05.jpeg"></figure>I was going to use the bambu RBG LED strips but it havent arrived yet and i cant wait to share the new ship with everyone.. so i just used leftover White LED strips.. I might print another one with multicolor and add the RGB LED strips.. we&#39;ll see..<blockquote>If you&#39;re thinking of using <a target="_blank" href="https://shrsl.com/4id36" rel="nofollow noopener">bambulab white LED strip</a>.. please use my affiliate link to buy them from the bambu store..Bambulab RGB LED Strip Light - <a target="_blank" href="https://shrsl.com/4ka5u" rel="nofollow noopener">https://shrsl.com/4ka5u</a>    </blockquote> As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..  P/S: thank you everyone who downloads my models and those who donated their precious boost token.. Every little thing helps me and I hope you&#39;ll have fun 3d printing my suspended model i make..&nbsp;<figure class="table" style="height: 162.344px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">By joining me as a supporter.. you&#39;ll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">And if you&#39;re looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Millennium Falcon Part2

Star Wars 

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

yard

Nerro3D

EspañolMaceta con forma de torre de castillo. Especial para plantas pequeñas como Suculentas, pequeños aloe vera, hierbas aromaticas, etc. Lleva unos pequeños agujeros en la parte inferior para que el agua sobrante caiga directamente al foso. Muy facil de imprimir.&nbsp;EnglishFlowerpot shaped like a castle tower. Special for small plants such as Succulents, small aloe vera, aromatic herbs, etc. It has small holes at the bottom so that excess water falls directly into the pit. Very easy to print.

Maceta torre/Tower pot

Kassidy

Prints & Poops

This a remix of the ‘Vegetable Can Dispenser w/ Labels’ by cbaileyhp here on Maker World. I loved the model and design but it unfortunately did not fit on our existing shelves, so I remixed it to be shorter and remove some of the vertical space within the handles to fit our needs. It holds fifteen canned goods in the size of 14.5-15oz (approximate can measurement 75mm x 112mm) superbly well. Also has labels that can be swapped out as desired if your need for the organizer changes. cbaileyhp has continued to make new labels and the ones made for the original model will also work in this model. The fully assembled model is approximately 12.5 inches (317mm) tall by 15.75 inches (400mm) deep.&nbsp;Examples of what we will be storing is diced tomatoes, corn, green beans, tomato sauce, refried beans, other various beans. We typically purchase from Costco in 8 and 12 packs. This model allows us to restock before being empty and ensures we are always using the oldest cans first as it works in a ‘first in first out’ (FIFO) method which is incredibly handy.&nbsp;Personally, we opted for printing it in PLA+ and it has been holding up well. The connecting joints are tight, secure and sturdy. Additional clips and fasteners are provided on a separate plate for additional reinforcement. Additionally, stability can also be added using M3x10 screws for pre threaded holes (link in ‘Finishing Information’ to Amazon).&nbsp;Additional printing and finishing information below are as provided by cbaileyhp at time of this posting on the original model and accurate for this model as well. Printing Information-Round fasteners slide over center round support to provide additional stability (on fastener plate)-Clip fasteners clip the side components together (on fastener plate)-Textured plate gives a nice, finished look (optional)-Can be printed in any color to match your decor&nbsp;Finishing Information-Gave it stability using 13 M3x10 screws (pre-threaded but a small round file on the hole opening can help start the screws)-I used these: <a target="_blank" href="https://www.amazon.com/dp/B0CHMHYCFV?ref=ppx_yo2ov_dt_b_product_details&amp;th=1" rel="nofollow noopener">Amazon.com: 440 Pcs M3 Small Metric Screws with Nuts, Hex Socket Head Cap and Nut Assortment Kits, Alloy Steel Replacement Machine Fastener Screws and Bolts Nuts (Black) : Industrial &amp; Scientific</a>-Recommend using a touch of super glue on each of the round fasteners and where it joins together are the very top, but neither are necessary-Glue is not used on the clip fasteners, but can be if you wish&nbsp;Thank you cbaileyhp for a great design and allowing others to adjust to their needs. Happy printing all!!

printer addons

Star Wars

yard

Kassidy

Kitchen