wenhui1984

装修

Hauler

Hoto hot glue gun standPrint with tpu

Hoto glue gun

小米

SH Designs

Celebrate the Year of the Dragon with this colorful and fun rattle drum. Known as a “Bolang Gu”, this spinning drum is decorated with “Happy Year of the Dragon” on the shell while the handle features traditional auspicious symbols for prosperity, luck, longevity, and double happiness. It works really great, is louder than expected and is really fun to spin!&nbsp;The parts are all printed in PLA and friction fit together without glue, but a little dab will help if your parts print more loose.

Rattle Drum - Bolang gu

玩具

DylanRyanDesign

I designed this small container so that I can carry toothpicks with me as I have braces and always get food stuck in my teeth when I eat.I have been using this design made in PLA for over 6 months now without an issue or any damage. It can be attached to a keychain or backpack etc.&nbsp;Fits standard small toothpicks up to 65mm&nbsp;I have uploaded 2 versions, 1 with 10mm of thread and 1 with 5mm of thread for those who like to do less screwing. I will upload some more versions in different sizes soon.&nbsp;<ul><li>PLA or PETG</li><li>.2mm layer height</li><li>Printed with 2 or 3 walls for strength.</li><li>15% Infill (Could probably print without infill)</li><li>Print at a slightly higher temp than usual for good layer adhesion.</li><li>No Brim</li><li>No Support - bridging is sufficient</li></ul>&nbsp;If you have any feedback or requests please let me know in the comments 😁

Container for Keychain, fits toothpicks/Pills/etc.

户外

AdamCraft

Introducing the Sturdy Dashboard Phone Holder Clip!&nbsp;No assembly required - just print and use! 🚀&nbsp;I&#39;ve crafted this 3D model with simplicity and convenience in mind. Whether you&#39;re navigating through bustling city streets or embarking on a road trip adventure, this holder keeps your phone secure and accessible.&nbsp;I opted for ASA for my sample due to hot outdoor temperatures in my country, ensuring durability and reliability in any climate. However, you can also choose PETG or ABS for your printing needs, offering flexibility to suit your preferences and environmental conditions.&nbsp;But wait, there&#39;s more! Not only does this holder secure your phone on your dashboard, but it can also double as a clamp for your computer desktop or transform into a simple phone stand. From your car to your workspace, this versatile accessory has you covered.Say goodbye to fumbling for your phone while driving and hello to seamless navigation and communication. Get ready to hit the road with confidence and ease.&nbsp;Happy Printing! 🛠️

Sturdy Dashboard Phone Holder Clip

工具

SSSR_SH

2 Ballpoint Pens&nbsp;Fast-printing ballpoint pen Using a 107mm length refill Spring: 0.4x4.2x25 (spring wire diameter/spring diameter/spring length)&nbsp;No supports Recommended layer height: 0.1mm Recommended material: PETG Please note the placement angle of the Clickable Pen Body.&nbsp;

2 Ballpoint Pens

办公

DatumCAD

<figure class="image image_resized image-style-side" style="width:38.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_394e64d5f2285.gif"><figcaption>GIF - Exploded View Animation</figcaption></figure>An adjustable handle that can be attached to any existing standard full-size hacksaw blade. This compact tool allows you use the blade in tight / hard to reach areas, and where a full-frame would foul with the material.&nbsp;I also have various other models for various blade types &amp; are yet more compact in size. Feel free to check those out too:<ul><li><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Junior hacksaw handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/400706#profileId-302219" rel="nofollow noopener">Jigsaw blade handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/410315#profileId-312254" rel="nofollow noopener">Reciprocating saw blade handle</a></li></ul>All designs incorporate opposing dual thumb CAM levers with positive snap shut to ensure the blade does not slip once held &amp; it is as safe as possible to use. This took a lot of prototyping &amp; testing but works great. It is quick &amp; toolless to adjust….and satisfying to use as a result.&nbsp;Most standard ‘full size’ hacksaw blades are 0.5&#34; (12.7mm) wide by approximately 0.6 - 0.7mm thick, if you want to double check yours for compatibility as anything this wide (or smaller) should fit fine.&nbsp;Note: The CAM levers have been deliberately designed to be tight fitting to avoid the blade slipping in the tool. That said, if after the first few engagements &amp; releases of the thumb lock it has not eased to a point you are comfortable using it, then you could try printing the smaller CAM levers from the Print profile provided. Additionally, if you have a thinner than standard blade or a loose fit, then you may want to print the Larger CAM Levers profile.&nbsp;If you like this model then you may also like my sliding <a target="_blank" href="https://makerworld.com/en/models/213504#profileId-233069" rel="nofollow noopener">steel ruler limit block</a> which also incorporates a CAM locking mechanism. Or any of my other <a target="_blank" href="https://makerworld.com/en/@DatumCAD" rel="nofollow noopener">DatumCAD</a> designs :)&nbsp;Fasteners: For this model you will need 2x M3 x 30mm fixings which act purely as strong pivot axles to the cam lever.&nbsp;Assembly:<ul><li>Insert the CAM lever into the Housing. Tip: Insert with the level in the closed / horizontal position as the holes will then line up easier.</li><li>Insert M3 Fixings. Tip: The fixings should pass though the handle housing counterbore hole &amp; the CAM lever relatively unhindered, but then will need lightly screwing into far handle hole which has been deliberately sized so as to require some tightening without to much force. (Remember these are just acting as pivot points, no need to tighten down hard, but equally the fixing should not want to fall back out either.)</li><li>Insert Blade. Top Tip: Open both of the CAM levers up around 180degrees from the closed position, so the CAMs don&#39;t grab the blade upon insertion. Once you have in the desired location, simply lock both CAMs fully down.</li><li>Enjoy - your adjustable hacksaw handle is now ready to use.</li></ul>I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough &amp; are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image image_resized" style="width:55.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-21_6e3d9fd6f9586.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Link to Junior version</a></figcaption></figure><figure class="image image_resized" style="width:55.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_278390d1fc3bb.png"></figure>

Ultimate Hacksaw Handle

SyntaxError6

Organize your MacBook USB-C cable with this simple design that fits over the MacBook charger body.  2 different designs 96W and 140W. The 96W size fits both 96W and 87W.  Instructions: 1) Print 2) Add to charger 3) Wrap cord Design took inspiration from this model but isn't a direct remix. I started over with a new from scratch design. <a target="_blank" href="https://makerworld.com/en/models/178762#profileId-196731" rel="nofollow noopener">https://makerworld.com/en/models/178762#profileId-196731</a>

Apple MacBook Pro Charger Cable Organizer

数码

Brinth

These are pegs for keeping your IKEA Skadis boards off the wall without having to put more screws in the wall. They work and have been tested with white, black, and 3D printed Skadis boards. They are meant to be a snug fit. There are 2 sizes, 15mm and 20mm. The 20mm should be the same size as the pegs that come with the Skadis board. The 15mm was made to fit with these to stop the board from flexing too much against the printer under weight: <a target="_blank" href="https://www.printables.com/model/527051-ikea-skadis-mount-for-bambu-lab-x1cp1s-requires-am" rel="nofollow noopener">https://www.printables.com/model/527051-ikea-skadis-mount-for-bambu-lab-x1cp1s-requires-am</a>&nbsp;For some reason the brown non-coated Skadis boards have thicker holes, so if people want me to resize the peg for those I can. They still fit in the brown boards, but are a little loose. I've also found that using them with these boards it's a very tight fit, but does fit: <a target="_blank" href="https://makerworld.com/en/models/46115#profileId-52091" rel="nofollow noopener">https://makerworld.com/en/models/46115#profileId-52091</a>&nbsp;If you are looking for some wall mounts for the top of a board I have used these pressure fit pegs along with 2 of these at the top to attach it to the wall: <a target="_blank" href="https://makerworld.com/en/models/19480#profileId-32716" rel="nofollow noopener">https://makerworld.com/en/models/19480#profileId-32716</a>&nbsp;Prints with no supports or brims required.&nbsp;Let me know if there is anything you want me to adjust, these are my first ever 3D models and would like to hear any feedback.&nbsp;&nbsp;

IKEA Skadis Pressure Fit Bottom Spacer Pegs

洞洞板

达文西FPV

安装视频：<a target="_blank" href="https://www.bilibili.com/video/BV1i94y1A7Yq/?vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">《3D打印》拓竹料架免费分享，图纸简介，A1mini打印，blender建模！_哔哩哔哩_bilibili</a><figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1i94y1A7Yq/?vd_source=2089e59f0ea7f6d627e58ab3197c5395"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1i94y1A7Yq&amp;autoplay=0&amp;poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1i94y1A7Yq&amp;autoplay=0&amp;poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

A1mini外挂料架External material racks

ai mini

skywolf

龙年特辑：新年剪纸合集

Maker Tom

Beer crate for all types of batteries:&nbsp;The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries&nbsp;Printing without Supports!&nbsp;Happy Printing.

Battery Crate AAA / AA / Box

置物

Deviian

Version 2.1 added with a modified peg for people experiencing issues with complete insertion of the holder. In case version 2.1 is loose in your case, use the original version 2.0. New version of securing the printer head cable to prevent snagging on the Z-axis structure.The cable is routed further away from the Z-axis. The overall design has been modified for a more aesthetically pleasing appearance. Printed using standard settings with PLA.