I designed this little water dish for my jumping spider, Penny, to provide reliable water without disturbing her enclosure as often. It has a natural rocky look, a fully printable 10 ml tank, and anti-drowning gyroid infill with secure footing. The tank alone took over 10 iterations to get the airflow, dispensing, and water level right. I'm so happy to finally share it! Follow my profile for future designs and updates! #petfeeder #Contests #Newmodel

#Mokusystem second place! It's an honor to be selected. Thank you so much to all who download and use my models, and to the @Collecticraft and @SabreDesign team for choosing me 🥳(Edited)

Thank you so much for the support for the Moku Display Stand! I'm honestly blown away by all the love, and I want to keep improving it to show my appreciation. I've added a new Stackable Version, with a rail profile on top so the next bracket can sit directly on the tier below. For multi-tier setups, use it for lower levels and the Bottom Rail Version on top. All 3 bracket versions are in the Customizer. Please share ideas or feedback in the comments! #Contests #Hostedbycreator #Mokusystem

I just submitted my Sci-Fi EDC Slider to the Children's Toy Design contest! It is a fun little magnetic fidget toy with embedded magnets, a satisfying snap from side to side, and a sci-fi control-panel look. I designed it to be simple, playful, and safer for kids by keeping the magnets fully enclosed inside the printed parts. Please check it out, give it a boost, and let me know what you think! #Contests #ChildrensToys

Quick update for my Moku Display Stand: I fixed a MakerWorld Customizer issue where the rail cutout would generate in the wrong position when changing both the stand height and rail row count. The Fusion 360 model was working correctly, but Customizer needed a little extra help. Custom versions should now come out properly, so please give it another try if you ran into this before! #Contests #Hostedbycreator #Mokusystem

I just published Moku Drawers, a parametric storage add-on for the Moku Modular Desk System! There are rail-top drawers for stacking or adding Moku accessories, flat-top drawers for a smooth top surface, and hanging drawers for the Moku Display Stand. Width, height, and rail rows are all customizable, so you can size them for your own setup. #Contests #Hostedbycreator #Mokusystem

#Mokusystem Parametric drawers coming soon... stackable base rail versions in the works too!

I added a new Bottom Rail Version for my Moku Display Stand! This version has cutouts at the bottom of the brackets, so it can sit on another Moku base rail or stack into multiple tiers. It lets you build a raised desktop display with more vertical space while keeping everything tied into the Moku rail system. A second F3D file is now available in the Customizer, along with a separate print profile for this version. #Contests #Hostedbycreator #Mokusystem

What if the Moku base rail could become a little desktop shelf? I designed this to lift the rail off the desk with parametric end brackets, turning it into a warm Japandi-style display stand/riser with space underneath. You can customize the height and supported rail rows to fit your setup, and add a mid bracket to join two rails. Give it a print, share your setup, and follow my profile for drawer modules and Gridfinity base updates! #Contests #Hostedbycreator #Mokusystem

I made a Tesla cupholder adapter with a little more style! Designed for Juniper/Highland models, around the 32 oz Owala FreeSip with a silicone boot, and I also tested it with a Thermoflask. It should fit other similar large bottles too. The adapter is offset so it doesn't block the other cupholder slot, which means you can even fit two side by side. #Contests #Cupholder

Experience Bambu Studio V2.5.3's Color Mixing feature for yourself! Only 4 spools needed to print a full rainbow of colors!