user_469747535

Clucky

This is a square top for my circular model display. This model prints without the need for any supports and rotates without the need for bearings. The circular version of this display table can be downloaded here: <a target="_blank" href="https://makerworld.com/en/models/85349#profileId-91236" rel="nofollow noopener">https://makerworld.com/en/models/85349#profileId-91236</a>&nbsp;&nbsp;

Rotating Display Table Square

Garage

Loch

The Warhammer 40k Reminder Tokens of course needed a custom container to have them neatly stored away or securely in a box to take with me in a bag. (Tokens can be found here: <a target="_blank" href="https://makerworld.com/models/480660" rel="nofollow noopener">https://makerworld.com/models/480660</a> ) It can hold 5 tokens of each and 1 of each arrow token. The Box Lid has slits such that the catches are flexible enough to hook the nook on the box counter part. It is best to orient the Box Lid on it&#39;s flat side such that the layer lines are aligned with the with the long bridged section of the lid.  I&#39;ve used snug supports in Bambu Studio, which were fairly easy to remove with a thin metal tool. I used the thin side of a small flat screwdriver.&nbsp;The design on the lid is my own logo, which I&#39;m pretty fond of. I think it looks pretty nice on the box as well. In my case I didn&#39;t use a prime tower when switching to the other color. Which is noticeable. If you want to get a better result I&#39;d advice to add a prime tower.  If for some reason you don&#39;t want my logo on the lid, I&#39;ve added a Lid file without logo.  I hope this box and the tokens can be of use at many tabletop games!  Happy Gaming! and printing!

Warhammer Reminder Token Storage and Travel Box

Antonín Ušelík

Hello, I offer for download X wing Fighter from star wars worldManual included&nbsp;Print plates are named and split by coloursprint with base profile 0,16mm high quality with manual supports, strong bridging&nbsp;PS: if there will be problems with some brick let me know and I will solve it&nbsp;

Star Wars brick X wing fighter

Star Wars

joshua.makes

Hello, healthcare heroes and DIY enthusiasts! It&#39;s time to honor the dedication of Respiratory Therapists with this RT / Respiratory Therapist Lightbox project. Featuring the distinctive RT emblem, with a stylized lung icon encompassed by the letters &#34;RT,&#34; it&#39;s a heartfelt tribute to the invaluable work of respiratory therapists everywhere.&nbsp;Here&#39;s What You&#39;ll Find:&nbsp;RT Emblem: This lightbox proudly showcases the RT emblem, a symbol of expertise and care in the field of respiratory therapy. The stylized lung icon represents respiratory health and the letters &#34;RT&#34; signify the dedication of Respiratory Therapists.&nbsp;Ready for Printing: We provide the 3D printing files to assist you in creating your own RT / Respiratory Therapist Lightbox, making it simple to craft a meaningful piece of decor.&nbsp;Simple Assembly: Concerned about assembly? Worry not! We&#39;ve included links to where we source our LED strips. Simply peel and apply. Rest assured; it&#39;s easier than you think!&nbsp;Personalize Your Tribute: Customize your project by choosing your preferred colors and details. It&#39;s an opportunity to create a unique and personal homage to the respiratory therapy profession.&nbsp;Respiratory Pride: When illuminated, this RT Respiratory Therapist Lightbox illuminates the dedication and expertise of Respiratory Therapists. It serves as a symbol of appreciation and respect.&nbsp;Share the Thanks: Proudly exhibit your finished creation and express your gratitude for respiratory therapists within your community. It&#39;s a heartfelt gesture that acknowledges the invaluable contributions they make.&nbsp;Whether you&#39;re a respiratory therapist yourself, have a respiratory therapist in your family, or simply wish to show appreciation for healthcare professionals, this DIY project provides an ideal means to honor the unwavering commitment of Respiratory Therapists. Create your own RT Respiratory Therapist Lightbox and let your gratitude shine brightly!&nbsp;⚡ USB LED:<a target="_blank" href="https://amzn.to/3S4VnVE" rel="nofollow noopener"> https://amzn.to/3S4VnVE</a>&nbsp;or&nbsp;⚡ USB LED w/ Switch:<a target="_blank" href="https://amzn.to/3RYEImp" rel="nofollow noopener"> https://amzn.to/3RYEImp</a>&nbsp;or ⚡ USB LED w/ Remote:<a target="_blank" href="https://amzn.to/3vs7Uuo" rel="nofollow noopener"> https://amzn.to/3vs7Uuo</a>&nbsp; *If you purchase an item through the links provided, I may receive a commission. This helps support my work and enables me to continue providing valuable content. Thank you for your support!*

RT / Respiratory Therapist Lightbox

Healthcare

Bells

All Attribution to <a target="_blank" href="https://www.printables.com/model/576578-bambu-lab-ams-universal-spool-center-desiccant-hol" rel="nofollow noopener">NeedItMakeIt</a>. Watch <a target="_blank" href="https://www.youtube.com/watch?v=9h51g4tW-Bc&amp;ab_channel=NeedItMakeIt" rel="nofollow noopener">this video</a> which is a great overview of the potential benefit of using this accessory in your AMS to help keep your filament dry! This is a remix of the original model. I printed the original model and found the holder kept slipping out of my Bambu stock spools. In order to make them more secure but still give maximum air flow to the desiccant I have scaled up the base and lid &#39;disc&#39; so they do not slip out. I also noticed multiple people asking for a print profile on MakerWorld for PLA, since there are a few tweaks to the default line widths, bottom shell layers and enabled Spiral Vase mode. I printed with Bambu PLA Basic which came out flawlessly so I wanted to share.

AMS Universal Spool Center Desiccant Holder

Bambu

哼哼哈嘿

This is a desktop storage product where you can store your cosmetics, remote control, parts, or other suitable products in your favorite colors and materials.&nbsp;The entire product does not require support. The side wall has a thickness of 2mm and the bottom layer has a thickness of 3mm to make the product more sturdy.&nbsp;Attention: It is best to increase the printing of the skirt edge, or I personally prefer to slow down on the first layer to prevent the occurrence of failure caused by warping the edge.&nbsp;Finally, I wish you a pleasant printing experience.

Cosmetic storage box /桌面化妆品储物盒

Bathroom

Allar3D

A more compact version of the ‘Universal wall mount - Heavy-Duty. It&#39;s quite a bit smaller and slimmer compared to the original version.&nbsp;Download the Heavy-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/456629#profileId-364531" rel="nofollow noopener">Universal Wall Mount - Heavy-Duty</a>Download the Light-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/464549#profileId-373195" rel="nofollow noopener">Universal Wall Mount - Light-Duty</a>

Universal Wall Mount - Medium-Duty

wall mounts

DIMENSÃO 3D

A model I made for mothers day! enjoy! just delete the text and use your own. Use glue.

Tree of Life / Family - Mother's day

Family

ostat

Varying sized clamps for using has hold downs on CNC table.I find it best print them lying down on the side, support is needed.Generated Clamps<ul><li>Options for bolt sizes M3, M4, M5</li><li>Lengths 25mm-150mm</li><li>Heights 3mm-100mm</li></ul>Resources <ul><li>Official doco - <a target="_blank" href="https://docs.ostat.com/docs/openscad/cnc-clamps" rel="nofollow noopener">https://docs.ostat.com/docs/openscad/cnc-clamps</a></li><li>Repo - <a target="_blank" href="https://github.com/ostat/OpenSCAD-Projects/tree/main/CncClamps_OpenSCAD" rel="nofollow noopener">https://github.com/ostat/OpenSCAD-Projects/tree/main/CncClamps_OpenSCAD</a></li></ul>&nbsp;OpenSCAD/Customiser settingsThe clamps are generated using an OpenSCAD model, you can use the built in customiser . The model is included in the supplied files. CNC hold down&nbsp;<figure class="table"><table><thead><tr><th>Setting</th><th>Description</th></tr></thead><tbody><tr><td>Bolt_Cutout_Length</td><td>Length of bolt cutout (mm)</td></tr><tr><td>Bolt_Cutout_Diameter</td><td>Diameter Length of bolt cutout (mm)</td></tr><tr><td>Bolt_Clearance</td><td>Clearance around the bolt head (mm), default = Bolt_Cutout_Diamater</td></tr><tr><td>Wall_Thickness</td><td>Thickness of the front and side walls (mm)</td></tr><tr><td>Base_Thickness</td><td>Thickness of the base(mm), Default = Wall_Thickness*2</td></tr><tr><td>Base_Relief</td><td>Back relief on base (mm), default = Wall_Thickness/2</td></tr></tbody></table></figure><h2>Front Lip</h2><figure class="table"><table><thead><tr><th>Setting</th><th>Description</th></tr></thead><tbody><tr><td>Front_Radius</td><td>Radius of front lip (mm), default = Wall_Thickness</td></tr><tr><td>Front_Lip_Length</td><td>Length of front lip (mm), default = Front_Radius</td></tr><tr><td>Front_Height</td><td>Height of front lip (mm), default = Front_Radius</td></tr><tr><td>Front_Relief_Angle</td><td>Relief on front (deg)</td></tr><tr><td>Front_Wall_Thickness</td><td>Front wall thickness (mm), default = Wall_Thickness</td></tr><tr><td>Support_Length</td><td>The full height length (mm), default = half length</td></tr><tr><td>Support_Height</td><td>The full Length height (mm) , default = quarter height</td></tr></tbody></table></figure><h2>Back Lip</h2><figure class="table"><table><thead><tr><th>Setting</th><th>Description</th></tr></thead><tbody><tr><td>Back_Radius</td><td>Radius of back lip, default = Base_Thickness*3/4</td></tr><tr><td>Back_Lip_Length</td><td>Extend length of back lip</td></tr></tbody></table></figure>

CNC Hold down clamps (All sizes, OpenSCAD)

JamesThePrinter

Set of trees and trunks that work interchangeably. The pieces thread together. The set includes 3 trunks and 5 trees:Trunks<ul><li>Short Trunk</li><li>Tall Trunk</li><li>Tall Trunk - Textured</li></ul>Trees<ul><li>Spiral Tree</li><li>Lattice Tree</li><li>Scalloped Tree</li><li>Wavy Tree</li><li>Diamond Tree</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>Trunks need no special settings. While the trees do not require any special settings, I recommend the following:Spiral Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>Manually move seams to the back side of each spiral. This will reduce curling of the leading edge.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/5faa24f8-ced8-45b5-83ef-2f7ad102d1ec/spiral.png#%7B%22uuid%22%3A%22cf03bb2c-3622-43a3-87f6-ed5c101cf626%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Lattice Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li></ul>Scalloped Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>Wavy Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li><li>Use the Classic perimeter generator - Arachne leaves some unwanted edges</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/1d56fb74-827a-44e7-ac40-975484e4d77c/wavy.png#%7B%22uuid%22%3A%2228f92ead-6d9a-44c4-aaa3-8459b69435ff%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Diamond Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Spiral Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Simply Green PLA</li></ul>Lattice Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Bambu Lab Matte Dark Green PLA</li></ul>Scalloped Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Opal Green PLA</li></ul>Wavy Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Inland Lutz Green PLA</li></ul>Diamond Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Mystic Green PLA</li></ul>

Christmas Tree Set

Christmas

CrexisEnnex

Create your own version of the Enterprise D Conference Lounge - on your refrigerator! &nbsp;I’ve remixed magnet-compatible versions of the Enterprise D’s Conference Lounge ships display, but have also provided what you need to update it to all on-screen canon Prime universe Enterprises.&nbsp;The ships are all to scale* relative to each other. You could print most of these on a smaller printer - I originally scaled these for my old Ender 2 with a max diagonal lengfth of 225 for the Enterprise E. Then Picard S3 aired and there is no way I could rescale for the F (Jesus that thing was huge!) without rendering everything before the B unprintable. Thus, if you want to print the F on a small printer, you’ll need to cut and rejoin it.&nbsp;Each model includes magnet cutouts that can accommodate 2-3 small, high-strength magnets; I sized the cutouts to use <a target="_blank" href="https://www.amazon.com/gp/product/B09SW9BQ2D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">these 5x2 mm magnets from Amazon</a>, and most ended up inserting securely with pressure and no glue. You could also just apply a magnet strip across the indents instead.&nbsp;ISSUES TO NOTE: <ul><li>*For the STS Orbiter, I couldn’t fit the magnet indents without breaking through the outer layers, so that one’s roughly 10% larger than it would be if it were accurately to scale. I hope you can forgive me. </li><li>FYI: I have not yet personally printed the space shuttle or the F and G, but I used the same process to make those models as I did the others. Once I get around to printing a whole new batch, I'll update the photos.</li><li>The nacelle pylons are ultra thin and fragile on the NX-01, the 1701, the 1701-A, and surprisingly also on the 1701-E. Be gentle when separating supports.</li><li>Since these are all sloping hulls that taper gently, finer layer heights of .12 or .08 will yield much cleaner prints.</li><li>I’ve had mixed results getting the tops of nacelles to print cleanly, especially where there’s fine line detail like on the D. I might recommend a smaller .2mm hotend to address this.</li></ul>Credit due: Just like on my Printables version of this model set, these are remixed from Thingiverse and Printables models: mostly ShannDeMann’s “<a target="_blank" href="https://www.thingiverse.com/thing:3485751" rel="nofollow noopener">Star Trek USS Enterprise Ultimate Collection - Wall Variant</a>”, which is itself remixed from Solid_Alexei’s fantastic “<a target="_blank" href="https://www.thingiverse.com/thing:1423364" rel="nofollow noopener">Star Trek USS Enterprise Ultimate Collection</a>” I’m also remixing CoopTread’s “<a target="_blank" href="https://www.thingiverse.com/thing:3060746" rel="nofollow noopener">Enterprise-D Observation Lounge</a>” for the CVN-65 model. More recently: <a target="_blank" href="https://www.thingiverse.com/thing:1423267" rel="nofollow noopener">Solid_Alexei’s STO Odyssey Class</a> for the Enterprise F, <a target="_blank" href="https://www.thingiverse.com/thing:6074019" rel="nofollow noopener">Cmanyeet77’s Constitution III</a> for the Enterprise G, and <a target="_blank" href="https://www.printables.com/model/248456-space-shuttle-sts" rel="nofollow noopener">Swooshie’s Space Shuttle STS</a> for the STS orbiter.

Enterprise Magnetic Wall Display from Star Trek

Star Trek

Chito

<h2>Summary</h2>Update 4/7/2020: added cork holder, use size 9 corks (most used in commercial wine bottles), screw-down into place and secure with a pin underneath.&nbsp;This is a new version of my miniVICE Miniature holder painting and hobby system. old one: <a href="/thing:2976476" rel="nofollow">https://www.thingiverse.com/thing:2976476</a>&nbsp;This one has 4 jaws allowing support for both round and square bases in the one holder. Additionally, you no longer require the metal pins of the previous version. It is, however, only slightly harder to print, I had to use rafts to print the collets/jaws. It uses a 70mm rubber band. You could experiment with a hair elastic maybe.&nbsp;More details to come with more detailed instructions.For now, it assembles much the same way as the Y-Series version. View its detailed instructions here: <a href="/thing:2976476" rel="nofollow">https://www.thingiverse.com/thing:2976476</a>&nbsp;NOTE: in this version, the collets are numbered because the way in which they are installed matters. install them 1 to 4 sequentially anticlockwise or the chuck will not workThere are also several versions of the collets small collet:<ul><li>25mm - 40mm</li><li>65mm rubberband</li><li>chuck jaws top regular</li></ul>large collet:<ul><li>45mm - 60mm</li><li>90mm rubberband</li><li>chuck jaws top large</li></ul>combo collet:<ul><li>25mm - 45mm and 45mm - 60mm (hollow bases only)</li><li>65mm rubberband</li><li>chuck jaws top regular</li></ul>large collet v2:<ul><li>45mm - 60mm</li><li>65mm rubberband</li><li>chuck jaws top regular</li></ul>combo collet v2:<ul><li>25mm - 40mm and 45mm - 60mm</li><li>65mm rubberband</li><li>chuck jaws top regular</li></ul>would love feedback on these