Wallydoggy

Chris1974

<h2>Update 14-2-2024</h2>I have updated the models and print profiles to make room for the exhaust opening on the back op the printers. It was blocking it just for a small ammount but now it is totally clear.<h2>A big Poopchute that prints fast!</h2>Made this bucket to collect the Bambu Lab X1 Carbon droppings at the back of the machine. Made it really thin so it prints fast!Logo does not need support if your printer is dailed in correctly. &nbsp;Beware: the model is thin (0.8mm). It still is plenty strong for collecting the poop and it works great. If you want a thicker version please select the thicker print profile (1.6mm), but it will take about twice as long to print.

Poop chute Carbon X1C - P1P - P1S

Things I made

PartyLime

GEN 12: please see my profile for the GEN 12 ball. There&#39;s a limit of 500mb on one page so I had to make another for the latest Gen. It bounces really well and feels super durable in TPC I wasn&#39;t satisfied with the current models of the airless basketball on here as they only had a single lattice. This took me days make sure the double lattice worked in CAD - SolidWorks was not built for this! As I don&#39;t have $2,500 to spare, I worked from the images available online.I printed it in TPU. It doesn&#39;t bounce as much as a standard basketball in TPU so I suggest a stiffer material.&nbsp;GEN 9: I have added a gen 9 version. It is a little closer to the original and should weigh about the right amount when printed in TPU/PLA&nbsp;GEN 10: I have adjusted the size of the hex holes and increased the filled on them. I&#39;ve also increased the lattice thickness to 8mm to hopefully increase bounce. The logo on the top and the airless gen 10 tag have also increased in size a little to improve how they look. Lastly, the holes around the seam are now pentagons as in the original ball&nbsp;GEN 11: I have added a new version with cut-outs throughout the seams. This will hopefully make the bounce more consistent.&nbsp;The original version I uploaded was removed due to “abnormal download data”. MakerWorld support took all my points but said I could re-upload so here it is again. Hopefully that won&#39;t happen again. MATERIALS:Extrudr Hard TPU (58D) - good durability about 40% bounceOverture Super PLA+ - 100% bounce but broke easilyOverture easy nylon (PA6) - broke almost instantly (the community have suggested “annealing” the print in water to increase durability)BASF Forward AM Ultrafuse TPU 64D - good durability and 60% bounce (BEST SO FAR)BASF Ultrafuse TPC 45D - good durability and great bounce. I recommend annealing this one at 110°C for 10 hours at least.

Things I made

Things to make