votoms_su

Hába97

I have prepared a collection of keychains with the KTM logo for you&nbsp;The whole collection of keychain can be found in Raw Model Files thanks.

KTM keychain collection

moto

Cjwelcome

The Suspended String Art has always been a super cool concept and I figured I'd try my hand at making one. Cubone has always been a beloved Pokémon and my personal favorite, so an SSA model of Cubone's skull helmet seemed like a perfect start. MARPRO_3D on Cults had a great free model to start from in creating this awesome design so shout out to them for their awesome models with their cubone model linked below! I cannot list it as a remix due to the Makerworld algorithm scanning the listing that says “No Derivatives”, however MARPRO_3D has provided me permission to remix and that is why this model is currently licensed the same for No Derivatives and the makerworld team is aware of this.&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/art/cubone-skull-free-3d-printable-model" rel="nofollow noopener">Free OBJ file Pokemon Cubone Skull 🐉・3D print model to download・Cults (cults3d.com)</a> &nbsp;As usual, this needs to print at 0.2mm layer height and wall generator set to Arachne in Bambu Studio.&nbsp;If there's some other object or creature you'd like to see in an SSA piece, then DM me to let me know and I'll see if I can add it to the project list. Happy printing everyone!

Cubone Suspended String Art

模型

3DPrintable.art

Cute little mummy toy, with exaggerated head and round eyes with a playful expression.&nbsp;Please note that printing this model will require supports. Use the easy print profile by default. Just change the scale to print the size you need.&nbsp;Photos of dual color prints, one using a glow in the dark PLA filament. Be creative and share your results!&nbsp;For a more detailed print you might want to decrease the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Cute Little Mummy

人物

Moon_3D

This is a streamlined A1 AMS Lite drying box solution. It can be assembled by drilling a few holes into an IKEA Samla 22L container and using the original A1 screws.After three weeks of practical use, it's running smoothly without any issues.Add a desiccant and it's ready for use. Humidity can be as low as around 15%.&nbsp;Dismantling AMS is not difficult, just unscrew a few screws. You can refer to the following wiki for guidance.<a target="_blank" href="https://wiki.bambulab.com/en/ams/maintenance/ams-lite-com" rel="nofollow noopener">AMS Lite Installation Tutorial | Bambu Lab Wiki</a><a target="_blank" href="https://wiki.bambulab.com/en/ams/maintenance/ams-lite-body" rel="nofollow noopener">AMS lite Body Installation Tutorial | Bambu Lab Wiki</a>&nbsp;You can choose any IKEA Samla drying box solution for modification. I recommend these models because A1 can independently complete them.<a target="_blank" href="https://www.printables.com/model/373111-ikea-samla-22l-clip-never-lost/files" rel="nofollow noopener">https://www.printables.com/model/373111-ikea-samla-22l-clip-never-lost/files</a><a target="_blank" href="https://www.printables.com/model/601058-ikea-samla-22l-dry-storage-box-with-silica-reservo" rel="nofollow noopener">https://www.printables.com/model/601058-ikea-samla-22l-dry-storage-box-with-silica-reservo</a>&nbsp;

A1 AMS + IKEA Samla Drying Box Solution

RETIRED GUY 3D PRINTING

SIMPLE EASY PRINTVALVE STEM CAP.12 LAYERFITS SCHRADER VALVESCAR, BIKE, TRAILER ETC

LUKE SKYWALKER VALVE STEM CAP

figure

Whimsii3D

I do not like any of the HSW hangars and hooks with screw mounting, so I modified Argo's model with the standard hex insert on the back. You'll need a little bit of support under the hex but it's a super easy print. Prints well with either a 0.4mm and 0.6mm nozzle.

Snips/Pliers Hook for HSW Honeycomb Storage Wall

TOOL

juanmedinar20

Here is a solid carbon axle for the GT12 Club Race Hero. You will need a Ø¼" carbon fiber tube. A 110mm long tube will give a 172mm track, you can cut it a little shorter. To secure the wheel to carbon tube you need a M3 nut and grub/set screw. I haven't tested the spur gear and pinion but they have a 64 pitch. I have used 3d printed gears with a 48 pitch and they work perfect with a 0.4mm nozzle. If you have issue and strip the these gears with a 0.4mm maybe try a 0.2mm nozzle. On my car using the 3D printed side pods “search my profile” I ended up suing the 6mm. The axle is designed to use symmetrical bushings. The motor clamp is a model from Ken Ausplund and it should be printed out of a high temp material.

GT12 Club Race Hero Carbon Solid Axle

Troysterr

<h2>Summary</h2><a target="_blank" href="https://a360.co/3Lyhsdb" rel="nofollow noopener">Full 3D View</a>This is an original design, not a replica of any existing car. I wanted to come up with a design with fenders that I could still print in one piece (diagonally) on my 150 x 150 build surface.What is a "pinewood derby car shell"?A <a target="_blank" href="https://en.wikipedia.org/wiki/Pinewood_derby" rel="nofollow noopener">pinewood derby</a> is an event created by the Boy Scouts many years ago. Each scout is given a pinewood derby kit typically consisting of a block of wood with slots for axles, 4 wheels, and 4 nails to be used as axles. The scout (and his dad, usually) will then carve the block of wood into the shape of a car, paint it and apply stickers, install the wheels on the axles, and then race it at the "derby", which involves a sloped track with a timekeeping apparatus.An official scout derby will usually require that the parts in the kit be used for cars entered in the derby. Other organizations (including workplaces) often hold derbies, too, and some of them require the use of the parts in the box, including the block of wood.These "pinewood derby car shells" are intended to be used with an official derby wood block, cut down to size, along with the axles and wheels included in the kit. A printable model of the shaped wood block is provided. You can either use the printed model or use it to accurately cut an official wood block down to size. Notes: Car body: Supports are required. You can choose to print "Body.stl" and add your own raft, or you can print "Body with Minirafts" for a minimal raft-like surface that will aid in keeping the supports adhered to the build surface.Windshield: I printed this using clear PLA in vase mode, with 4 layers on top.Exhaust pipes: Plain versions are provided as well as some with "minirafts", to provide something for the supports to stick to.Everything else is pretty simple and straightforward to print, with minimal or no supports/rafts/brims.<h2>Post-Printing</h2>SmoothingThis car was smoothed with 3d printing resin and baby powder. You can find videos and guides online that describe the process, but here it is in a nutshell:<ul><li>Mix 1 part resin and 2-3 parts baby powder in an opaque container (so that it can be stored without hardening due to UV exposure).</li><li>Using a paintbrush or cotton swab, spread a thin layer of the resin/baby powder mix over the body, wherever you want to smooth print lines and gaps.</li><li>Use a UV flashlight (a cheap one--like the kind used to harden resin finger nail polish, which you can order from Amazon or buy in the pharmacy department of Walmart) to harden the resin.</li><li>Sand the body smooth until there are no thick layers left.</li><li>Repeat over any areas that are still rough.</li></ul>Depending on the infill you use, you should be able to add tungsten weights to the holes in the rear of the body. If you plan well, you can maximize the weights and still end up right at 5 oz. I haven't raced this design, but it seems like it could be pretty fast if you put some effort into it.

Vintage Concept Race Car (Pinewood Derby Car Shell)

Bob so cool

I feel like I've made a lot of progress compared to my first work. What do you think?