Mworks

BamBam Design

<h4>Threading Tool Handle</h4>A handy tool for cut and recut threads.It should fit square shaft from M2-M10 thread cutter (most inch thread as well).The square shank holders are graduated 0.5mm in one single tool.Insert 2,5-4,5mm square shaft in one side and 5-7mm in the other side.&nbsp;The knurled handle is enough to cut threads into printed parts and also recut metal.If you need more grip you can insert 8mm Screws into the side holes as a lever.&nbsp;Happy Printing😃 and don't forget to leave a like👍 and subscribe✔. It's free😉&nbsp;Update V1.1:<ul><li>Added 2,5mm square shaft hole</li></ul>&nbsp;Disclaimer:This work by BamBam Design is licensed under Standard Digital File LicenseStrict non-commercial, personal use only license.You are not allowed to Remix or Copy this model to other 3D printing websites without my permission.&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Threading Tool - Wind Wrench

tool

skvirtl

use with duble sided tape and zip-tie

cable holder

cable

KYZ Design

So I only have metal pegboards - some are metric (25 x 25 x 6mm) and some are imperial (25.4 x 25.4 x 6.35mm). The pegs I got from the hardware store were horrible - sometimes they didn't stay in when taking the tools out and wobbled around a lot - no fun to use.So I designed these to work with both metric and imperial pegboards. I went through at least 10 iterations to get to this, hope you enjoy, they will clip into place with a satisfying click.Sugest printing with PETG/ASA/ABS - at least 1mm of walls/top/bottom, 40% triangular infill.

Peg Hooks for Metal/Steel Pegboards - Metric and Imperial

pegboard

FilliFuu

Tread clicker fidget, taking inspiration from some of the best creations I have seen and creating a satisfying, easy to build toy. Requires no glue and can easily be assembled in under 1 minute. The track clicks either direction and is easy to spin, has been revised multiple times and tested for over a week. &nbsp;I printed this using elegoo pla, using a few supports, due to the spring required for the build its recommended against using silk as has only been tested using basic pla filaments. Please follow the print profiles as closely as possible.&nbsp;How to build -&nbsp;Step 1 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_29c9202f26857.jpg">Remove all supports.Step 2 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_140c47f8bd957.jpg">Gently flex the tracks being careful not to damage the hinge, so the track is able to freely rotate.Step 3 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_da9e4aac60d8c.jpg">Insert the spring as per the orientation in the above photograph (you may leave the spring out if you intend to use without the clicker function.Step 4 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_5c728b88676c5.jpg">Place the wheels inside the track as shown.Step 5 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_964a0a8ccffd9.jpg">Lower the wheels and track simultaneously as shown above, gently moving the spring aside as you lower into the notches on the wheel as shown. Step 6 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_aa1aad41a427a.jpg">Align the base and top with he orientation shown above and then gently click the two pieces together. Step 7 - <img src="https://makerworld.bblmw.com/makerworld/draft/177713/2023-11-16_fa34c2743f881.jpg">Done, rotate the track a few times ensuring the clicker function works - if the track feels stiff, rotate a few times further until the device rotates easily and enjoy.&nbsp;

Tread Clicker Fidget

おもちゃ

3D Schoko

An indispensable tool. This holder helps you keep the tool head cover up and relieve the strain on the cable while changing the nozzle or performing maintenance work. It is aligned so that it fits perfectly in terms of height, depth and width without putting any strain on the cable. And at the same time it is wide enough to avoid wobbling. It is printed without support and brim. If you are not sure how good your bed grip is, activate the brim for better grip.&nbsp;Ein unverzichtbares Werkzeug. Dieser Halter hilft ihnen dabei die Werkzeugkopf Abdeckung oben zu halten, und das Kabel zu entlasten während sie die Düse wechseln oder Wartungsarbeiten ausführen. Er ist so ausgerichtet das er perfekt passt von der höhe , tiefe und breite ohne das Kabel zu belasten. Und gleichzeitig so breit ist um ein wackeln zu vermeiden. Gedruckt wird er ohne Support und Krempe. Wenn sie sich nicht sicher sind wie gut ihre Betthaftung ist aktivieren sie die Krempe für besseren halt.

tool

cable

pegboard

おもちゃ

Accessory