user_938416604

My first self-made sandal. Printed in Men&#39;s size 43 for use with any standard footbed. (But it also works without if necessary.) The pair of sandals costs less than €7.50 (plus electricity) at a TPU price of €25/kg. The filament I use is standard TPU 95A or high speed TPU&nbsp;I have added a conversion table as a picture.If you are unsure about the size, print a version in cheap PLA first and test whether the size fits.  That&#39;s what I did.The straps can be adapted to your own Foot height and glued on accordingly.I use cyanoacrylate superglue that is waterproof and achieves excellent results.  (Cyanoacrylate adhesive is the best for bonding TPU)&nbsp;Here are a few tips:<ul><li>Don&#39;t fasten the straps too tightly. Then they can become uncomfortable. It is best to wear thick socks when attaching them. </li><li>The high speed filament feels harder than the standard TPU. This makes the sandals slippery at first on smooth ground. I took them for a walk outside and afterwards the grip was normal again.</li><li>The Tynmorry Standart TPU feels more comfortable than the Overture HS TPU</li><li>Alternatively, you can use PU artificial leather for the straps. This is softer, but will stretch a little over time.</li><li>The sandals are designed for over 100 kg.  For lighter people, I recommend reducing the infill and lowering the number of upper layers. Perhaps first make a 1 cm thick test print with the selected filament.</li><li>I recommend gluing the strips to the outside first and then attaching them to the inside. Any excess can easily be cut off afterwards.</li></ul>The sandal is still under development. I want to continue to improve the comfort and convenience and ultimately release a good, wearable and affordable shoe.I hope you have fun with the slippers, please write me your experiences and suggestions for improvement.&nbsp;- In the current version, I have reduced the infill to 11% and rounded off the edges of the belts.&nbsp;

3d printed ergonomic sandal

Shoes

3D Art

Ich habe das Spiel 4 gewinnt selbst Konstruiert in einem Harry Potter Look.Die Chips sollten mit einer 0.2er Düse gedruckt werden um ein sauberes Ergebnis zu erzielen.Die 2 Basis Platten müssen mit Hilfe der 4 Stifte zusammen geklebt werden.&nbsp;Wünsche Viel Spaß beim Drucken &nbsp;

4 IN A ROW / 4 GEWINNT Harry Potter Edition

Games

michal0082

Do you also have a baby at home and someone keeps disturbing him? That's why I made this simple door tag. Everyone knows right away if it's good to enter. The dimensions are 180x67x2 mm. Fully compatible with AMS. If you can think of a funnier sign, please leave a comment below!  Other signs can be found here:<a target="_blank" href="https://makerworld.com/en/u/1621874954/collections/297433" rel="nofollow noopener">https://makerworld.com/en/u/1621874954/collections/297433</a>&nbsp;

DO NOT DISTUR I´m sleeping (Door tag)

signs

goodnessforest

This is a night light model that is relatively easy to make. You need to buy LED lights, switches, and wires. You can also add a human body sensor photosensitive switch like me, which can automatically turn on the night light at night. When you need to get out of bed at night, he will automatically turn on the night light, which is beautiful and practical.&nbsp;I also encased the moon relief in resin and made it more delicate. I also sealed the moon relief part in resin to make it more delicate.

The Moon Relief Night Lamp

lights

OMMO

Do you have some l e g o minifigures laying around? You can use their heads to decorate your bicycle tire valve :) Caps are for Schrader and Presta valves, these are the most common on bicycle tires.Schrader valve have inner thread too fine, so it’s recommended to use layer heigh below 0.2mm

L E G O valve cap for bicycle tires 

Bike

Williams Industries

Wifey wanted some bats to decorate around the house. These print nice and thin, and do great with the adhesive putty below. I added a few different profiles so please check them out and select the one to your liking. Happy printing.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Adhesive putty: https://a.co/d/8lO3yU1

Bat Decor

Halloween 

SYST3M_OVERIDE

An alternate solution to the "joystick hanger" type PS5 controller under table holder.

Under Table PS5 Controller Holder

electrontics

KubiV_

Print with Flex/TPU filament! Depending on your filament hardness you can choose a wall diameter of the lens blower.

Lens Blower

tools

Dortumnd-reus

我上传了两个模型—橙子果盒、西瓜果盒，文件格式都是设置好参数的bamboo studio格式，可以直接开始打印。&nbsp;两个模型可以用作春节时招待客人的果盒，也可以作为简单的收纳盒，建议用pla打印；橙子果盒适合放一些瓜子花生等小物品，西瓜果盒可以放一些糖饼干之类物品。&nbsp;打印不需要任何支撑。西瓜果盒的盒盖需要双色，其他都是单色。&nbsp;设计灵感来源于https://platform.stlflix.com/product/citrus-vibes，请多多支持原创。

橙子果盒/西瓜果盒  Orange/watermelon fruit box 

toys

MaxTee

<a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/328354/rich_content/bf7410f2-4e3d-4409-b318-6bc4c2cb3f55/thumbs/cover/800x225/png/bmc-button.webp"></a><a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener">https://www.buymeacoffee.com/maxt</a>&nbsp;----------------------<h4>2 versions in one package:</h4><ol><li>Without a recycle logo on the side</li><li>With a recycle logo on the side</li></ol><h4> Why should you use this model and not the others?</h4><ul><li>It won't break, ever (as long as you use it for the trash bag rolls)</li><li>The bag roll will never fall out through one of the sides</li><li>The bag roll is very easy to pick up</li><li>Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls</li><li>Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll)</li><li>Can be mounted using double-sided tape or screws</li><li>Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered!</li></ul> The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 (much more important vs infill percentage!) Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Support Cubic Happy Printing!

Slightly Over Engineered Trash Bag Roll Holder

household

ctcarlton

This is the 12 hole Ocarina designed by nimaid, calibrated by RobSoundtrack and cleaned up by TheRapidPro. Very easy to remove supports. Just print and start playing. Main profile is set to 25% infill which is sufficient for a playable ocarina. I've found that 100% infill just feels nicer in the hand.&nbsp;Here is RobSoundtrack's demo of actual playing:  <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=TvEI7b8xlbU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TvEI7b8xlbU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;YouTube URL <a target="_blank" href="https://www.youtube.com/watch?v=TvEI7b8xlbU" rel="nofollow noopener">https://www.youtube.com/watch?v=TvEI7b8xlbU</a>Stand - <a target="_blank" href="https://www.thingiverse.com/thing:3876177" rel="nofollow noopener">https://www.thingiverse.com/thing:3876177</a> by MystikalCollar - <a target="_blank" href="https://www.thingiverse.com/thing:3874501" rel="nofollow noopener">https://www.thingiverse.com/thing:3874501</a> by Mystikal&nbsp;Note: Main picture is one I printed with the seam set to “Aligned” instead of “Back”. The uploaded profile is correct and will not put seams on the front face.

12 Hole Ocarina with "Legend of Zelda - Ocarina of Time" inspired Collar. Includes Organic stand.

instruments

R3DPanda

I felt obligated to improve and redesign the model. This version fixes all the small problems that the first version had and makes pulling out the PTFE tubes super easy. Additions:+Slimmer. Doesn't collide with the other tubes. +No more slipping off after removing a tube. +Looser fit. Doesn't squeeze the tubes. +Better design with less sharp edges.