user_936938131

giamma933

FILE IS READY TO PRINT&nbsp;I UPLOADED 2 PRINT PROFILES, CHOOSE WITH OR WITHOUT FRAME&nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp; The Model is 165.88x251.75mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Bambulab Basic Gold Transmission Distance: 5PLA BambuLab Matte Ash Gray Transmission Distance: 1.5PLA BambuLab Basic Jade White Transmission Distance: 5&nbsp;This print uses 4 unique filaments&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GoldAt layer #9 (0.8mm) swap to Ash GrayAt layer #12 (1.04mm) swap to Jade White for the rest.&nbsp;&nbsp;&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up. If u want to support my work <a target="_blank" href="https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT" rel="nofollow noopener">https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT</a>&nbsp;For request send me dm

FRAMED MOON KNIGHT MARVEL HUEFORGE FAST PRINT

marvel

wotfan

I recommend printing with a .2mm nozzle at .14mm layer height.&nbsp;The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).

Multicolor Tasmanian Devil Magnet

looney

Robin S

<h4>On platforms like makerworld, printables and co. there are often phonecases to see but for most people it is the wrong phone!</h4>This is a phone case generator,where you can create your custom and individual phone case.&nbsp;You just have to follow the steps and measure out your phone. Then you have to put these measurements into the generator and you&#39;ll get a complete model including all offsets and risks!&nbsp;If you want to have the same look like in the cover picure remove upper and lower layers in your slicer settings and choose your favourite infill!&nbsp;&nbsp;<h3>Introduction</h3>You can create your own phonecase fitting to your phone.First you have to open the customizer web-tool from this model. Then you have to measure out your phone and put the in the web-tool described values in and then click on generate. After that you can download the 3d model.&nbsp;<h4>Special variables</h4>-&#34;cam hole distance&#34;: With these two variables you set the distance to the cam hole from the upper left corner. x means the distance horizantally and y vertically. (Same at “cam hole size”)&nbsp;&nbsp;-&#34;distance to upper button&#34;: You have to set this value to the distance from the upper edge of the phone to the first button on the right side of the phone. Buttons on the left side are coming soon! Offsets are included so don&#39;t change the values just put the exact measurements in.&nbsp;-&#34;text position&#34;: Here you can say where your text on the backplate of the phonecase starts. With xt and yt you can move the text on x aand y axis.&nbsp;&nbsp;<h4>Offset variables description</h4>&nbsp;<img class="image_resized" style="width: 51.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000478570/design/2024-05-31_97b47e74d476.jpg">Offset “o” is the main offset, which makes a little gap between phone and case.I recommend to set this offset to 0.2-0.6 mm.&nbsp;&nbsp;<img class="image_resized" style="width: 50.09%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000478570/design/2024-05-31_03af8a7bd6a57.jpg">The variable “n” sets how strong or how hard the case holds the phone in place.I mostly used 1-1.2 mm.&nbsp;&nbsp;<img class="image_resized" style="width: 49.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000478570/design/2024-05-31_9fe8713d1773b.jpg">With the variable “s” you set the height of the grips that holds the phonein the case. Here you can leave it at 1 mm.&nbsp;&nbsp;-Now I added a new feature where you can add a text on the backplate of the phonecase. Just put for example your name on it and move it to the right position with “text position” variables. You can also adjust the size of the text.&nbsp;-added feature: Buttons can be created on both sides. If the length of the buttons is set to 0 they will be removed.-added left speaker hole&nbsp;print tipp:-enable the feature in the slicer, print infill first. So your printer will print the overhangs better.&nbsp;&nbsp;&nbsp;If you successfully made your own phonecase, great job, please send me an email with your values if it’s not in the following excel sheet yet. Then send me the measurements, the phone name and a picture that you printed it to this email adress:<a href="mailto:3dprint_robin@web.de" rel="nofollow">3dprint_robin@web.de</a>So we can add those values to a big library where everyone has access to the sizes of their individuell phone.Otherwise you can upload a remix to this model to achieve the same.The link to the excel sheet:https://docs.google.com/file/d/1-4dP4UFD8Y4-3RfeF4kMAfZTcvU_xaJY/edit?usp=docslist_api&amp;filetype=msexcel&nbsp;

Custom phone case 

phone

SnaKKo

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please give a 👍 if you like it, it&#39;ll help others discover it! If you&#39;d like to take your support to the next level, please give me a 🚀. Thank you so much!</boostcontent></boostme>With this Openscad 3D model you can easily create and customize your QR Codes by simply clicking the “Customize” button on this page (only available for desktop and mobile browsers).Don&#39;t worry about the QR code stand, I&#39;ve got you covered: <a target="_blank" href="https://makerworld.com/en/models/481160" rel="nofollow noopener">Ultimate QR Code Stand</a> 🎉  You can change the following parameters:<ol><li>QR Code type (Text, Wi-Fi, Phone Call, vCard)</li><li>Background, QR Code and Border dimensions</li><li>Optional hole for attaching to a keyring</li><li>Optional labels (position top/bottom/both and a lot of fonts)</li><li>Optional round blocks</li><li>…and much more!</li></ol>Special characters are not supported by the MakerWorld customizer; you can download the .scad file and open it with OpenSCAD if you need to use them.<h3> </h3><h3>*** Types of QR Codes you can create ***</h3>&nbsp;Text QR Codes: These codes provide a direct link to a plain text message, such as a generic string, email address or website URL. They are ideal for sharing contact information or directing users to specific web pages.&nbsp;Wi-Fi QR Codes: Eliminate the hassle of manually entering Wi-Fi passwords by using Wi-Fi QR codes. Simply scan the code, and your device will automatically connect to the specified network.&nbsp;Phone Call QR Codes: Initiate phone calls with a single tap using phone call QR codes. Scan the code, and your device will automatically dial the specified number.&nbsp;vCard QR Codes: Share your business card details effortlessly with vCard QR codes. Scan the code, and the contact information will be instantly saved to the user&#39;s device.<h3> </h3><h3>*** How to print multi-color ***</h3>&nbsp;If you DON&#39;T HAVE the AMS, configure Bambu Studio to pause the printing process at the exact right moment: immediately after the background color has finished printing and just as the QR code is about to start. This allows you to switch filament colors and achieve the desired multicolor effect.Here&#39;s how to add a pause at the layer:<ol><li>Right-click the green button with the white plus sign in the slicer interface.</li><li>Select &#34;Add Pause&#34;.</li></ol>The right pause layer depends on the thickness of the background.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476280/design/2024-05-22_93f20cb7c05738.png">&nbsp;If you HAVE the AMS and want a greater color control over each individual part, you can go to the &#34;Parts Download&#34; tab and download each part individually (.STL) and then import/merge them in Bambu Studio.Make sure to answer &#34;Yes&#34; to the question “Load these files as a single object with multiple parts?”. &nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476280/design/2024-06-17_38b3b1992bba38.png">&nbsp;Once done you will find the parts already positioned on the plate and then you can decide what color to give to the background, qr code and labels.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476280/design/2024-06-17_32b3d76307a2f8.png"><h3> </h3><h3>*** Changelog ***</h3>&nbsp;UPDATE 17 Jun 2024<ul><li>Added the ability to download individual parts for color selection via Bambu Studio</li><li>Code refactoring </li></ul>UPDATE 15 Jun 2024<ul><li>Now you can use round blocks instead of square ones</li></ul>UPDATE 1 Jun 2024<ul><li>If you need a stand, I&#39;ve created a parametric model in Fusion 360: <a target="_blank" href="https://makerworld.com/en/models/481160" rel="nofollow noopener">Ultimate QR Code Stand</a></li></ul>UPDATE 31 May 2024<ul><li>Added the ability to choose the label font name and style</li><li>Dual top-and-bottom labeling functionality with distinct strings added</li></ul>UPDATE 29 May 2024<ul><li>Revamped UI for a more engaging and efficient UX</li></ul>UPDATE 28 May 2024<ul><li>Label implementation</li><li>Code refactoring</li></ul>UPDATE 27 May 2024<ul><li>Address fields added for vCard type QR Code</li></ul>&nbsp;Special thanks to <a target="_blank" href="https://github.com/xypwn" rel="nofollow noopener">xypwn</a> for creating the qrcode scadqr library released under the <a target="_blank" href="https://opensource.org/license/MIT" rel="nofollow noopener">MIT license</a>.&nbsp;二维码 QR码 扫码 方块码 条形码 手机扫码 qrcode qr code

Ultimate QR Code Generator: Text, Wi-Fi & More

qr code

lithophane 

berri3D

Bring a little bit of Hyrule to your tree this year with a Legend of Zelda inspired snowflake ornament featuring a heart container piece.<ul><li>Print time: One snowflake takes ~50 minutes</li><li>Stealth Ornaments: print them in white and Grandma won't even notice</li><li>Big or small: they scale up or down</li><li>AMS ready: Pre-painted.</li></ul>Want another? I also have a <a target="_blank" href="https://makerworld.com/en/models/76205#profileId-80782" rel="nofollow noopener">Triforce snowflake</a> as well.<h3>Trouble? Questions? Comments? Please don't hesitate to get in touch!</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381925/2023-11-19_c8d27404379f3.png"></figure><h2>Printing Tips</h2><ul><li>Thickness: I find that 3mm has the right amount of stiffness but feel free to scale Z if you want to decrease the print time. The tradeoff is the ornament will become flimsy.</li><li>Purge volumes: I've calibrated them to reduce waste, but you may need to recalculate for your own filament</li><li>Plate: A textured plate is recommended because of the texture it gives to the bottom of the ornaments. Be sure your plate is extra clean to ensure success because the snowflakes have a detailed first layer.</li><li>Keep it cool: allow the plate to cool before removing ornaments. Thinner models can warp if they're pulled off too soon.</li><li>Keep it clean: clean build plates help detailed first-layer models stick.</li></ul><h2>Print Settings</h2><ul><li>Elephant foot compensation: 0 (it helps the first layer stick)</li><li>Wall Generator: Arachne (Classic walls make the top surface look sub-par)</li><li>First layer speed: 15 mm/s (helps things stick better and not be dragged)</li><li>Brim: none</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/381925/2023-11-19_c8d27404379f3.png"><h2>About the Model</h2>I've long admired Star Wars-themed snowflakes and I was surprised to find no 3d snowflakes for Legend of Zelda. After googling paper models for inspiration, I came up with my own designs. I made two variations: this one and <a target="_blank" href="https://makerworld.com/en/models/76205#profileId-80782" rel="nofollow noopener">another one featuring a Triforce</a>.<h3>Filament used in display models:</h3><ul><li>Red Silk PLA (Hello3D)</li><li>Jade Green Silk PLA (CC3D)</li><li>Glorious Gold (Spectrum)</li><li>White Silk (Hello3D)</li><li>Sky Blue Silk (Spectrum)</li></ul><h2>How to Support Me</h2>If you like what I make, I would love it if you would please click the like button and/or download a print profile. If you really like what I make, then please consider<a target="_blank" href="https://ko-fi.com/berri3d" rel="nofollow noopener"> buying me a coffee</a>. Thank you so much!<h2>Licensing</h2>These models are non-commercial and may not be sold, reproduced, or shared outside of this website. However, I will consider an individual license fee if you wish to sell printed models in your local area such as at a craft show. Please contact me for details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381925/2023-11-19_c8d27404379f3.png"></figure><h2>Changelog</h2>January 9, 2024<ul><li>Updated description to align with changed MakerWorld TOC</li></ul>November 27, 2023<ul><li>Initial upload</li></ul>

Zelda Snowflake Ornament - Heart Container

Christmas

Bamingo Design

<ul><li>🌊🌀 Dive into the mesmerizing world of waves with our Wave Coasters, designed with a realistic image view that captures the beauty and movement of the ocean.</li></ul>Wave Coaster: Capturing the Ocean<ul><li>🎨 Vivid View: Our Wave Coasters feature a detailed and intricate design of waves, reminiscent of the famous Japanese woodblock print “The Great Wave off Kanagawa”. The wave patterns on each coaster are dynamic and full of movement, giving a visual impression of rolling waves.</li><li>👶 Easy to Print: No need for (AMS) or (MMU). Only two manual filament swaps are needed to complete the model.</li></ul>Technical Specifications:<ul><li>📏 Size:<ul><li>10 cm</li></ul></li><li>🔧 Print Settings:<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li></ul></li><li>🌈 Color Changes:<ul><li>Start with Blue</li><li>At layer #12 (1.04 mm), change to Light Blue</li><li>At layer #18 (1.52 mm), change to White for the rest.</li></ul></li><li>📋 Assembly and Usage Tips:<ul><li>Alternatively, use our ready-to-print 3MF file—it automates these steps.</li><li>The files are available in STL, Prusa 3MF, and Bambu Lab 3MF file formats.</li></ul></li></ul>Explore More Designs:<ul><li>Dive deeper into our collection of nature-inspired coasters for more designs that capture the beauty of the natural world:<ul><li>🗼 <a target="_blank" href="https://makerworld.com/en/models/251129#profileId-267476" rel="nofollow noopener">City Coasters</a></li><li>⛰️ <a target="_blank" href="https://makerworld.com/en/models/30652#profileId-27193" rel="nofollow noopener">Mountain Coasters</a></li><li>❄️ <a target="_blank" href="https://makerworld.com/en/models/84832#profileId-90731" rel="nofollow noopener">Snowflake Coasters</a></li></ul></li></ul>Licensing Information:<ul><li>These designs are for personal use only. To access them for commercial purposes and enjoy exclusive benefits, consider joining our Memberships. <a target="_blank" href="https://www.printables.com/@BamingoDesign#join:397" rel="nofollow noopener">Printables Memberships</a></li></ul>Stay Connected:<ul><li>Be the first to know about our newest designs by following us on Twitter and Instagram. Find all our social media links and more at <a target="_blank" href="http://bamingodesign.com/" rel="nofollow noopener">bamingodesign.com</a>.</li><li>We&#39;re excited to see your creations! Tag us when sharing photos of your prints and connect with us. Your feedback and requests are always welcome. 💙</li></ul>

Wave Coasters - Hueforge

4 Da Houzz

chichirod

Black Panther Helmet split into 5 parts and coloured accordingly. Easy print

Black Panther Helmet Split into 5 parts

masks 

geekm0nkey

I found a Jurassic Park prop I liked, but felt it needed some adjustments to make it feel more like a prop and not just a replica print. Here is the list of changes I have made to the original. I am a huge fan of the Jurassic Park series and hope I did this prop justice.&nbsp;<ul><li>Corrected the colors of the main body.</li><li>Added more colors to the individual parts.</li><li>Removed the cap, so that it could be printed separately with support (glued onto the main body)</li><li>Changed the vials to be clear and filled with resin.</li><li>Created PLA DNA to be used if resin isn't available.</li><li>Separated the plates into colors, supports, and multi-color prints.</li><li>Created a blank main body to be used with the provided label (see images)</li></ul>Here is a list of the names on the vials.&nbsp;<ol><li>VR - 1.0</li><li>TC - 2.050</li><li>ST - 2.03</li><li>MT - 1.02</li><li>TC - 2.050</li><li>VR - 2.0</li><li>DL - 2.01</li><li>PR - 3.01</li><li>TR - 1.0</li><li>GA - 2.03  </li></ol>Update: I added some clear vial covers if you wanted more of an authentic look. Now they snap on like a cap.

Jurassic Park Barbasol Can Prop

props

Chester3D

&nbsp;IntroductionThe original model is designed for printers with a 250x250mm bed.&nbsp;If for any reason it doesn't fit on your bed, you can resize the model to the size you want from your slicer.&nbsp;It consists of two parts, the lamp body (body.3mf) and the rear cover (lid.3mf).Sometimes I include two lids, with and without a hole (choose the one you want, I recommend printing the Lid with hole whenever possible, to be able to remove the LED cable).&nbsp;If the back cover does not have a hole, you can easily make it from Bambu Studio, or from any other slicer you use.&nbsp;----&nbsp;You will need&nbsp;<ul><li>LED Strip: <a target="_blank" href="https://s.click.aliexpress.com/e/_DekFgj1" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DekFgj1</a></li><li>- Glue gun or Tape</li></ul>Optional, but recommended:&nbsp;<ul><li>Aluminum tape: <a target="_blank" href="https://s.click.aliexpress.com/e/_DEPgqHd" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DEPgqHd</a></li><li>- Textured PEI Sheet</li></ul>----&nbsp;Assembly instructions&nbsp;&nbsp;You can follow either of these two videos to assemble the lamp. It's very simple, you stick the LED strip inside and that's it. If you want, you can use aluminum tape to improve the lighting, although it is not necessary: &nbsp;<ul><li>Assembly instructions by braga3dprint: <a target="_blank" href="https://www.youtube.com/watch?v=QNsShLmXYh0" rel="nofollow noopener">https://www.youtube.com/watch?v=QNsShLmXYh0</a> (He makes very beautiful designs, you can leave him a follow and help him grow his channel!)</li><li>- Another assembly instructions: <a target="_blank" href="https://www.youtube.com/watch?v=nDUlBp7Mm1c----" rel="nofollow noopener">https://www.youtube.com/watch?v=nDUlBp7Mm1c----</a></li></ul>----&nbsp;Printing settings&nbsp;Following braga3dprint recommendations, you can start with these settings in Bambu Studio:<ul><li>Preferences (CTRL + P) → Activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.04</li><li>- Quality → Wall generator → Arachne</li><li>- Quality → Wall transitioning threshold angle → 50 degrees</li><li>- Strength → Advanced → Infill/wall overlap → 20%</li><li>- Quality → Advanced → Avoid crossing walls</li><li>- Increasing retraction / reducing temperature can help reducing wisps</li><li>- Order color printing from lightest to darkest color</li></ul>Important! Additional tips Remember to remove the purge line at the start printing, otherwhise it will ruin the print.Adjust the sequence of colors from Light colors to Dark colors, to prevent stringing. &nbsp;

NBA Golden State Warriors LED Lamp

sports

sopalajakub

Controller stand with a spider motif.Fits PS5, PS4 and Xbox controllers.Does not require supports.Use a small amount of glue to connect.

controller stand spiderman xbox ps5 ps4

xbox

Rocky00780

Nintendo Switch Docking Station in Super Mario Style.Super Easy to Print. Not for the OLED Version

Nintendo Switch Docking Station Super Mario

nintendo 

Cayden3D

This custom-designed flosser dispenser is right at home in any bathroom, kitchen, or dining room- keep those plackers handy! Print in PETG or ABS to keep one in the car!&nbsp;Keep the germs out and never be without a flosser with this awesome little dispenser! My design holds 22 Plackers brand flossers and is easily refillable via the self-securing lid. &nbsp;You’ll love using the compliant dispensing mechanism, and you can always keep an eye on how many flossers are left.&nbsp;**Note** specifically sized for: -Plackers Micro Mint -Plackers Twin-Line Flossers. -Plackers EcoChoice

Flosser Dispenser for Plackers

bathroom

standitupstore

Batman Mask of Phantasm &nbsp;Best batman series everIf it isn't comment which one is your favorite&nbsp;Tag us @standitupcomics

Batman mask of phantasm 

batman

The Master Sword from Tears of the kingdomsplit in half dowel in center to connect Parts or can be used for LEDs&nbsp;Offsets pieces for the stand plaque are on the last plate&nbsp;

The Legend of Zelda: Tears of the Kingdom Master Sword - LED through center 

zelda

Mario 

kmdesignslinn

<h3>Here are all of the face plates for my Magnetic Face Lithophane Boxes and Magnetic Face Picture Frames!</h3>Find those here:Lithophane Boxes - <a target="_blank" href="https://makerworld.com/en/models/167267#profileId-183639" rel="nofollow noopener">https://makerworld.com/en/models/167267#profileId-183639</a>Picture Frames - <a target="_blank" href="https://makerworld.com/en/models/255230#profileId-271632" rel="nofollow noopener">https://makerworld.com/en/models/255230#profileId-271632</a><h3>Printing:</h3>Everything should be good to print in the included print profiles, but do take note of the pauses for each plate. These are there to allow you to embed 8mm x 2mm magnets. The pockets are a little deeper and you may be able to fit 8mm x 2.5mm magnets.<h3>Notes:</h3>I intend to add face plates as I design them, so check back regularly. If you have any requests, just ask! Also, feel free to change the colors to whatever you want.

Frame Face Plates for my Magnetic Lithophane Boxes

frame 

Just_Josh

The scales of your life should always be in balance. Maybe that's what this means? I'm not sure, someone smarter than me would have to tell you.&nbsp;This can be scaled easily but make sure you pay attention to the value of the Z axis.  If you have X/Y/Z constrained it can become very thick.   You will also need to go into each layer and adjust the height on the Z if you rescale and change the overall thickness of the mandala.  (I.E. if you make the mandala 16mm thick you would need layer 1 to be at height 0mm, layer 2 at 4mm, layer 3 at 8mm and layer 4 at 12mm)

Libra Mandala - Zodiac Symbol

zodiacs

Big Simi

⚠️⚠️⚠️The filament that I used is included inside the 3mf file!⚠️⚠️⚠️<h2>I hope everyone likes this 🐉🐉🐉 and gives it ⭐⭐⭐⭐⭐!</h2>&nbsp;&nbsp;&nbsp;My other design:&nbsp;<ul><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/519798" rel="nofollow noopener">Hueforge Pokemon</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340368" rel="nofollow noopener">Pokemon Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/607365" rel="nofollow noopener">Design Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340360" rel="nofollow noopener">Hueforge</a></li></ul>&nbsp;&nbsp;&nbsp;Reference: <a target="_blank" href="https://www.pinterest.it/pin/944207878114221403/" rel="nofollow noopener">https://www.pinterest.it/pin/944207878114221403/</a>&nbsp;&nbsp;&nbsp;

Goku at Sunset

dragonball

<figure class="image image_resized" style="width:96.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/513694/2024-02-09_36781ba7c4b0a.png"></figure>&nbsp;Filament used: -PLA BambuLab Basic Black -PLA BambuLab Basic Grey -PLA BambuLab Basic Red -PLA BambuLab Basic Jade White&nbsp;<h2>I hope everyone likes this 🧱🧱🧱 and gives it ⭐⭐⭐⭐⭐!</h2>&nbsp;&nbsp;&nbsp;&nbsp;Credits: <a target="_blank" href="https://www.pinterest.it/pin/838584393142934066/" rel="nofollow noopener">https://www.pinterest.it/pin/838584393142934066/</a>&nbsp;&nbsp;

Titan in the wall Attachable  (HueForge - Attack On Titan)

Flori_

[NEW] Added rips on the outside for more grip while screwing the two halfs together. This is a small screw-able container that is ideal for adding a small amount of desiccant to your filament rolls while storing them. I use them with reusable silica gel instead of the ordinary silica bags. I prefer to use the ziplock-style bags from IKEA and throw 1 or 2 of the pucks in it as well. This should keep your filament dry within the bag even when it is not 100% air tight. I would suggest printing the parts in ABS as the silica can be dried in them directly. Alternatively, PLA or PETG will work as well but the silica needs to be dried separately. The design is not made by me. Please check out the original designers. <img src="https://makerworld.bblmw.com/makerworld/draft/675017/2024-03-09_8a5caf8ae548e.jpg"> I've also added an extra ring on the bottom piece to differentiate the parts while unscrewing.

[NEW] Desiccant Puck - small screw box for filament storage

ams/printer

GoingMerryPrinting

Print Settings:0.08mm layer height0.16mm first layer height100% infill&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Dark BlueAt layer #11 (0.96mm) swap to Light BlueAt layer #16 (1.36mm) swap to White for the rest.

Jujutsu Kaisen Gojo Hueforge

hueforge

guzzoenrico

ATTENZIONE SE NON AVETE LO STESSO FONT CHE HO IO, BASTA SELEZIONARNE UN ALTRO E MODIFICARLO A VOSTRO PIACIMENTO. Preparati al meglio per il giorno di San Valentino con questo Desainer semplice ma efficace per la tua dolce metà… MODIFICARE LE LETTERE PER UNA PERSONALIZZAZIONE COMPLETA. Prima cosa bisogna andare nella sezioni oggetti, dopo fatto ciò, selezionare l'oggetto che si vuole modificare (LETTERA SINISTRA/LETTERA DESTRA) e poi cliccare sul icona modifica testo.Una volta cambiata la lettera premere il tasto di spostamento oggetti e collocare la lettera nel punto desiderato. Subito dopo alzare la Z della lettera per far si che si incastri nel oggetto. Non preoccuparti di quanto dovrai alzarla, basta che almeno metà sia dentro l'oggetto.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/451198/2024-01-25_66397dc72c425.gif"></figure> MODIFICA DELLA SCRITTA CENTRALEStesso passaggio delle lettere, ma qui basta solo alzare la Z per fa si che rientri nel piatto e vada ad incastrarsi automaticamente nel oggetto.<img src="https://makerworld.bblmw.com/makerworld/draft/451198/2024-01-25_758c33fd66bfc.gif"> MODIFICA DELL'INFINITO SE VI SI ALZA DAL PIATTOBasta abbassare lo Z dell'infinito fino a quando non raggiunge il piatto.<img src="https://makerworld.bblmw.com/makerworld/draft/451198/2024-01-25_0aa8e6b32515d.gif">

INFINITO PERSONALIZZABILE

Gifts

Pulsar Designs

Planning to be out on the water? Print this floating buoy keychain to keep your keys or other small belongings safe!&nbsp;Keys can fly overboard in an instant, so it's vital to have some sort of floating attachment to keep them from darting to the seafloor. This buoy has a volume of 49375 cubic mm and weighs 15.40 g (with PLA filament and my print settings). I used this to calculate the maximum weight it can keep afloat; at least 35g (1.25oz), and that's without factoring in the buoyant force acting on the keys. You can, of course, scale up the print to allow for even greater payloads!&nbsp;I modified my default print settings to find the perfect balance between safety and light-weightiness:<ul><li>3 wall layers ensure no water can seep into the print.</li><li>10% density cubic infill creates closed-off pockets to prevent flooding in a worst-case scenario, while keeping the buoy as light as possible.</li><li>Small layer heights and slower printing speeds contribute to a clean and water-tight print.</li></ul>I also recommend printing with a brightly colored PETG filament, although PLA will work just fine as well.&nbsp;Enjoy!

Floating Buoy Keychain

keychain 

DeepSouth3DPrints

Merry Grinchmas door corner.UPDATE:(Per request I've uploaded two more print profiles for the model to be printed Face Down on the build plate which will give the model a clean textured look when using the gold pei plate!)&nbsp;I uploaded both the right and left print profile versions.Please give it a like! It helps getting noticed forothers to enjoy. Thanks andMerry Grinchmas!&nbsp;You can find my other Christmas decorations <a target="_blank" href="https://makerworld.com/en/u/1201824007/collections/122929" rel="nofollow noopener">here</a>

Merry Grinchmas Door Corner

Christmas 

Nymthiriel

BB8 Keychain

star wars

PhaseworksCA

UPDATE: I've uploaded a thinner (2mm version which is still rigid enough to look good and stand properly. It uses almost 50% less filament and prints a bit quicker :)&nbsp;If you would like to know how long I spent messing around with the sketch in fusion360 instead of in adobe illustrator where I should have been doing it… please ask my therapist.&nbsp;It came out pretty well though! I added some more supporting sections in the uploaded version to make it into a more solid piece / a bit more rigid.&nbsp;Commemorate your time playing god of war, or just give as an inventive “Best Dad” Trophy. The choice is yours.&nbsp;This one is a whole bed print, I recommend you give your bed a good clean with isopropyl alcohol before printing to ensure good adhesion. The small display stand must be printed seperately, but only takes 20 mins by itself.&nbsp;<figure class="image image_resized" style="width:100%;"><a href="https://www.printables.com/@PhaseworksCA/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/599339/2024-02-27_cbac20a9d0926.png"></a><figcaption> </figcaption></figure>

Runic Circle Geometric Kratos - God of War

PlayStation 

Lalboys Design and 3D Printing

Deathstroke Mask from Arkham Origins. I printed this in one go on my X1 Carbon. Going to paint and assemble soon so will update the pictures when I am finished. &nbsp;I also split the mask into two in case anyone wants to print the orange and black halves separately. &nbsp;

Arkham Origins Deathstroke Mask with Back Piece

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to Jade White At layer #21 (1.76mm) swap to Red for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Pokeball - HueForge

pokemon 

3D Prints This Week

(If you shrink the size, keep “z” at 100. It will be too thin if you don't)&nbsp;&nbsp;Load black, dark gray, lite gray, and white into ams.&nbsp;If you don't have ams, see below.&nbsp;&nbsp;Swap Instructions:Start with BlackAt layer #31 (0.64mm) swap to Dark GrayAt layer #37 (1.04mm) swap to Lite GrayAt layer #45 (1.52mm) swap to White for the rest.&nbsp;If you like the way it comes out, feel free to drop a tip in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Mandalorian Cartoon Keychain / Starwars / 

Taiga Prints 3D

Digi egg of Courage

digimon 

3DealityDesigns24

Great little edition to a desk set up for you mario fans

Super Mario pipe pen pot 

mario

Tommy Gun

Here&#39;s a nice lightbox i created, using the trace tool in lightburn, then imported in thinkercad for basic modeling :D&nbsp;Enjoy&nbsp;link to led :<a target="_blank" href="https://fr.aliexpress.com/item/1005005174831591.html?spm=a2g0o.productlist.main.1.af87s2kTs2kT8T&amp;algo_pvid=2e5b60e2-3a87-4ab6-a35b-fc4ae168871a&amp;algo_exp_id=2e5b60e2-3a87-4ab6-a35b-fc4ae168871a-0&amp;pdp_npi=4%40dis%21CAD%2121.13%216.97%21%21%21110.45%2136.45%21%402101efab17099341247553378ecf28%2112000031970857794%21sea%21CA%214272763062%21&amp;curPageLogUid=R2TklPxJKhB4&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">https://fr.aliexpress.com/item/1005005174831591.html?spm=a2g0o.productlist.main.1.af87s2kTs2kT8T&amp;algo_pvid=2e5b60e2-3a87-4ab6-a35b-fc4ae168871a&amp;algo_exp_id=2e5b60e2-3a87-4ab6-a35b-fc4ae168871a-0&amp;pdp_npi=4%40dis%21CAD%2121.13%216.97%21%21%21110.45%2136.45%21%402101efab17099341247553378ecf28%2112000031970857</a>&nbsp;Interested in selling my prints :<a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a>&nbsp;&nbsp;

Cannabis Weed LED Lamp RGB-LED sign

smoke

Cayenne

deathly hallows 7 wand holder Harry Potter Support baguette reliques de la mort pouvant acceuillir 7 baguettes.

marvel

looney

phone

qr code

lithophane

Christmas

4 Da Houzz

masks

props

sports

xbox

nintendo

bathroom

batman

zelda

Mario

frame

zodiacs

dragonball

aot

ams/printer

hueforge

Gifts

keychain

Christmas

star wars

PlayStation

dc

pokemon

star wars

digimon

mario

smoke

harry Potter