user_925846420

Eternity Labs

A simple redesign of the v2 Air freshener holder for the little trees. &nbsp;Has Mom written on the front plate, and “Mom&#39;s taxi smells like love” on the back plate! &nbsp;A great quick gift in under 2 hours!

Mom's Taxi Smells Like Love <3

Harald Bruns

Reupload of existing design from FormFutura on Printables (<a target="_blank" href="https://www.printables.com/model/855880-ribbed-glue-gun-sticks" rel="nofollow noopener">https://www.printables.com/model/855880-ribbed-glue-gun-sticks</a>)&nbsp;<h3>Description:</h3>You have a little bit of filament left so these Ribbed Sticks can be used for fixing and glueing your other projects. To prevent wasting all the small bits and pieces. The ridges make sure your glue gun can grip the stick. &nbsp;Blog About this design:<a target="_blank" href="https://formfutura.com/blog/pla-glue-sticks/" rel="nofollow noopener">https://formfutura.com/blog/pla-glue-sticks/</a>&nbsp;<h3>Instructions:</h3>You can use the Ribbed Sticks in your average hot glue gun with a diameter of 10mmTo use the Ribbed Sticks in a smaller glue gun you can also scale it down.Print the Ribbed Sticks with 100% infill to make sure you make efficient use of space.

PLA Glue Gun Sticks

Printer

xile06

Duck around and find out model.Broken down into parts so each item can be a different color.Used negative cylinder for mounting hole

Duck around and find out

To make

Manufacturing Wizard

Transform your workspace with our Modular Pegboard System! This versatile setup lets you customize and organize your tools and supplies like never before. Lightweight yet sturdy, it’s perfect for any garage, workshop, or studio. With easy installation and a range of accessories, you’ll have everything at your fingertips. Say goodbye to clutter and hello to productivity with this must-have organizational tool!

Modular Pegboard System

Peg board

3DPrintCess

In order to reduce the so-called beach effect in the litter box and to develop a stem for a wide variety of litter boxes that catches as much litter as possible, I designed a collection container. The size is 20 centimeters by 40 centimeters.&nbsp;The white mats can be removed individually; you can then vacuum the container or take it and empty it. I have designed an extension option for a better fit in front of the toilet and to prevent slipping. This can be glued to the container and the litter box can then be placed on top of it. But it also works without it, so it would be an advantage if you attached rubber feet or perhaps Velcro or something similar, just so that it stays in place. This would certainly be the more sensible option for emptying, as in my case I would have to lift the litter box every time.&nbsp;I hope this reduces the beach effect for you too, it has helped me well so far and it also looks good, better than the usual mats that are used to catch the litter in front of the toilet, which ultimately don&#39;t fit in anyway everything gets stuck and spreads all over the room.&nbsp;Since I found that my two cats still manage to spread the litter over the box, I designed a high edge, which can be attached later with (for me) hot glue. This edge is also too big for the print bed, so I had to split it. &nbsp;So that the gap at the front doesn&#39;t bother you, I also designed an &#34;Anti Beach&#34; sign which you can stick over the spot. Alternatively, this sign can be printed out in a single color and stuck over it. It&#39;s best to always use hot glue from a hot glue gun.

Anti Beach - Cat litter collector

DonMatis

Cyber Cat filament painting using the fantastic Hueforge. The model is very thin and 120x120mmPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Overture Black Matte PLA Sunlu Gray PLA Overture Light Gray PLA Basic Bambu Labs White Swap Instructions: Black until layer #6 at 0.56mm Gray until layer #10 at 0.88mm Gray until layer #21 at 1.76mm White for the rest.

Cyber Cats - Hueforge

JamesThePrinter

A small, strong case with a collection of optional inserts for different uses.&nbsp;<h3>Case</h3>Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.This can be a standalone case or you can add inserts for more functionality. &nbsp;&nbsp;Print SettingsBase and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. &nbsp;<h3>Optional Inserts</h3><ul><li>Battery Holders <ul><li>AA Holder - fits up to 6 AA batteries</li><li>AAA Holder - holds up to 8 AAA batteries</li><li>9V Holder - fits up to 2 9V batteries</li></ul></li><li>Digital Storage Holders - Can be used together or separately<ul><li>MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section</li><li>SD Card Holder - fits up to 6 SD cards in the upper section</li></ul></li><li>Dividers<ul><li>Full Divider - Splits the entire case into 2 compartments</li><li>Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider</li><li>Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider</li></ul></li><li>Nozzle Holders - Can be used together or separately <ul><li>Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li><li>Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li></ul></li></ul>Print SettingsNo special print settings are needed for any of the inserts. I used 3 perimeters and 10% infill. &nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Black Case<ul><li>polymaker PolyTerra Charcoal PLA</li><li>Hatchbox Sparkle Gray PLA</li></ul>Red Case<ul><li>polymaker PolyTerra Army Red PLA</li><li>polymaker PolyTerra Lava Red PLA</li></ul>Yellow Case<ul><li>PrintBed Yellow PLA</li><li>polymaker PolyTerra Banana PLA</li></ul>Teal Case<ul><li>polymaker PolyTerra Arctic Teal PLA</li><li>PrintBed Baja Blue PLA</li></ul>Purple Case<ul><li>Prusament Galaxy Purple PLA</li><li>Fillamentum Lilac PLA</li></ul>Orange Case<ul><li>CC3D Flame Orange PLA+</li><li>Inland Orange PLA</li></ul>Green Case<ul><li>PrintBed Green PLA</li><li>polymaker PolyTerra Forest Green PLA</li></ul>Blue Case<ul><li>GIANTARM Matte Navy Blue PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Multi-Use Case with Inserts

storage

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Made this model so my headset would rest on a superhero. prints very nice. remember to check out my other headset stands. *Spiderman - https://makerworld.com/en/models/110722#profileId-118337 **Dead Pool - https://makerworld.com/en/models/140981#profileId-153593

Car

Printer

To make

Peg board

Cat

hue

storage

Head stands