晚西

Manifold3D

If you were following on the Elegoo discord this is PsychItsMike, several of us have been working on this project for a few weeks now, Jungle posted his wonderful work recently, these are my personal changes. <h4>Changes from JungleG1337's version:</h4><ul><li>Thickened several areas, especially the support structure and mounting locations</li><li>Thickened mount for LED light significantly and other screw areas on the 4020 fan mount</li><li>Tightened hole size on heat-set inserts and regular screw holes</li><li>The heat-set inserts were far too loose before, now you actually have to heat up your inserts and melt them in place. I also found the screw holes to be too loose, barely catching on m3 screws, now it's a tight fit, your mileage may vary depending on tolerances. </li></ul><h4>Compatibility </h4><ul><li>This is tested on my Elegoo Neptune 4 Pro. As far as I can tell it will also work on the Neptune 4, 4 Plus, and 4 Max</li></ul><h4>Everything you need:</h4><ul><li>Check out this bill of materials: <a href="https://docs.google.com/spreadsheets/d/15IdDd8h8FA0Fvt1MASDWcvsHo8MCbr7nRf7lmk_D0Cs/edit?usp=sharing" rel="nofollow">https://docs.google.com/spreadsheets/d/15IdDd8h8FA0Fvt1MASDWcvsHo8MCbr7nRf7lmk_D0Cs/edit?usp=sharing</a> </li><li>The yellow highlighted options are those that I purchased and installed, there are plenty of alternatives</li><li>Most importantly, you'll need: 2 5015 blower fans, 1 4020 radial fan, some m3 screws, and m3 threaded heat-set inserts. You'll also need some way of wiring the fans to JST ZH1.5 connectors<ul><li>I would not recommend splicing and soldering the new fans to your old fan wires, just in case you want to revert to the stock setup</li><li>You can buy connectors and crimp them or, like I did, you can buy connectors with wires attached and splice/solder those to the fan wires</li></ul></li></ul><h4>Installation steps:</h4><ul><li>First, order the items described above in the bill of materials<ul><li>Total for my parts is $56, though keep in mind this includes items like a soldering iron and pack of m3 screws which you might already have (and are very useful for other projects)</li></ul></li><li>Print each of the 4 files, only the left side piece requires supports, and touching build plate only should be fine</li><li>With your original hotend setup, reset your z-offset to a very safe high number, something between positive 0-1mm. This way if the sensor isn't in the exact same position, you'll avoid smashing your nozzle into your bed</li><li>Disassemble your hotend, there's a video on Elegoo's Youtube channel if you're having difficulties <ul><li>Basically it's 4 screws on the back of the hotend, and a bunch on the bottom to release the fans and LED light</li></ul></li><li>Cut and strip some wire on your new fans, and plug in a ZH1.5 connector, connect to the wires by hand to check the polarity (some fans use the reverse polarity of Elegoo's, and my connectors actually had the colors switched as well)<ul><li>You'll have to turn on your printer and set a fan speed, you can set your nozzle to preheat to any number (like 10) to turn on the hotend fan</li><li>When you have the polarity figured out, solder your wires together</li></ul></li><li>Install your heat-set inserts by heating them up with the soldering iron (or your nozzle if you're desperate), and set them in place with tweezers </li><li>Attach the left, middle, and right printed pieces together with 2 m3 screws per side </li><li>Attach the 4020 fan to the middle piece, and add the clip-on fan guard to make sure the blades aren't hit when turned on</li><li>Attach the auto bed level sensor to the left piece, and the LED light to the middle piece</li><li>Mount the side pieces with the m3 screws near the top. There's some wiggle room up and down on each side to adjust the location, I found it best to lower the z axis until the nozzle was on the bed, then adjust until the fan outputs were barely above the nozzle </li><li>Lastly, install the 5015 blower fans into the left and right pieces and screw them in from the outside in, with a nut on the inside (you can go the other direction if you install these earlier, but then it's difficult to reach the screw to mount the left and right pieces to the x-axis)</li><li>Power on the printer and go into level mode. Adjust your z-offset, then do a test print</li><li>Set fan speed to 50% and never look back, enjoy blissful quiet printing at high speeds</li></ul><h4>Results:</h4><ul><li>This hotend setup is FAR quieter than the stock setup, without even considering the rear blower. </li><li>This setup has considerably more airflow, making the rear blower fans unnecessary </li><li>This setup is heavier than the stock setup, coming in around 135 grams compared to 101</li><li>Here are videos I took with the stock setup and this upgraded setup to compare noise levels (notice how on the upgraded setup you can actually hear the motor noise)</li></ul><figure class="media"></figure><figure class="media"></figure>

Neptune 4 Silent Hotend Mod

海王星4

Libery300

Remix of Yung Chin remix (https://www.printables.com/model/259145-ender-33-pro-stealthburnerclockwork2-mount), to add CR-Touch mount on the side as i wanted to keep using the same probe when converting to the stealthburner.&nbsp;x_offset: 40 y_offset: 15 z_offset: 1.73

Ender 3/3 Pro Stealthburner mount with CR-Touch

ender3

Mc2.project3D

<h2>ARK MK1 REACTOR by Tony StarkThis is the Iron Man heart for LED Lamp kit-001.</h2>Simple to print, no supports. (to be printed at 0.2mm layers and in Pla material)<h3>--V2 REVIEW COMPLETED--</h3>These components have been revised:  The instructions you will find below do not change with revision 2&nbsp;ASTA CORTA: clip fit<img class="image_resized" style="width: 14.82%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_a96f1bbc70d2c.png"><img class="image_resized" style="width: 13.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_3009800e2c211.png">ASTA LUNGA: clip fit<img class="image_resized" style="width: 14.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_006039051b68a.png"><img class="image_resized" style="width: 13.63%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_1b8899013f068.png"> BOBINA: improved offset<img class="image_resized" style="width: 16.18%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_108063b83c315.png"><img class="image_resized" style="width: 14.46%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_165ee8ce81163.png">&nbsp;PIASTRA DISCHI: improved offset <img class="image_resized" style="width: 19.35%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_5f0baefc76fdd.png"><img class="image_resized" style="width: 17.04%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_4b6898843d7a4.png">   SCALE ANELLI:  -change space for more snug &#34;Anelli&#34;. -modified offset for “Corona superiore” -modified offset for fixing &#34;Scale on &#34;Piastra Dischi&#34; <img class="image_resized" style="width: 17.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_a44568a420222.png"><img class="image_resized" style="width: 17.15%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_e5f4a6b3c263f.png"> CORONA SUPERIORE: -larger diameter      <img class="image_resized" style="width: 18.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_a1ce9c9a9a703.png"> <img class="image_resized" style="width: 20.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e73256a95a72c.png"> PONTE ANELLO SUP: -larger diameter -more editing<img class="image_resized" style="width: 21.9%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e779d93ae45ab.png"><img class="image_resized" style="width: 24.41%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_f5bc5bfce6fa4.png"> VITE: -larger diameter<img class="image_resized" style="width: 23.13%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e531b455aa69.png"><img class="image_resized" style="width: 20.79%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_54cce897bb6a9.png">&nbsp;EXLOSED FUSION 360:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_d0ad36003ab58.png"></figure>LINK assembly: (follow the Gifs at the bottom of the page)https://www.instagram.com/reel/C7HQLcwtCva/?igsh=aWJxbnk3aHpocnJ4&nbsp;COLORS USED:-Black-White-Silver (grey)-Gold-Copper-Transparent&nbsp;Different colors can also be used.&nbsp;<figure class="image image_resized" style="width: 65.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_dfbd2dcda0747.jpg"></figure>&nbsp;COLORAND QUANTITYComponents to print with Black color:-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)-ANELLO ASTE-CLIP (20 pezzi)-ANELLO BUCATO-CORONA SUPERIORE-PONTE ANELLO SUP&nbsp;Components to print with White color:-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)&nbsp;Components to print with Grey color:-ANELLO SUPERIORE-VITE (x 3 pezzi)&nbsp;Components to print with Copper color or Gold color:-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4-BOBINA (x 10 pezzi) Components to print with Transparent or White color:-CORDONE (x 10 pezzi)&nbsp;ASSEMBLY STEP TO STEP:STEP 1-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)<figure class="image image_resized" style="width: 55.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_9ac29e20e0b1e.gif"></figure>&nbsp;STEP 2-LED LAMP KIT-001<figure class="image image_resized" style="width: 55.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_c2adad2b7a86c.gif"></figure>&nbsp;STEP 3-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)-ANELLO BUCATO<figure class="image image_resized" style="width: 54.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_098ff17d18285.gif"></figure>&nbsp;STEP 4-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4<figure class="image image_resized" style="width: 55.05%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_3c5e3c122d75a.gif"></figure> STEP 5-ASSIEMAGGIO STEP 1 E STEP 4-ANELLO ASTE<figure class="image image_resized" style="width: 54.31%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_d530ed8b5197a.gif"></figure>&nbsp;STEP 6-CLIP (20 pezzi)-CORDONE (10 pezzi)-BOBINA (x 10 pezzi)<figure class="image image_resized" style="width: 53.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_96dd67f61a1bb.gif"></figure>&nbsp;STEP 7-ASSIEMAGGIO STEP 5 E STEP 6-CORONA SUPERIORE<figure class="image image_resized" style="width: 52.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_959c30a0e78b4.gif"></figure>&nbsp;STEP 8 (FINE)-ANELLO SUPERIORE-VITE (x 3 pezzi)<figure class="image image_resized" style="width: 50.83%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_1ebd86754979c.gif"></figure>&nbsp;<h2 style="text-align: center">BASE REATTORE ARC MK1</h2><figure class="image image_resized" style="width: 65.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_ed19e7b5a87ce.jpg"></figure> REACTOR BASE COMPONENTS:-PIATTAFORMA-RIDUZIONE-TUBO BASE-BIG VITE-DISCO SCRITTE-SCRITTE&nbsp;COLORS USED:-Grey-Black&nbsp;ASSEMBLY STEP TO STEP:STEP 1 (CLUTCH ASSEMBLY)-DISCO CON SCRITTE-RIDUZIONE<figure class="image image_resized" style="width: 50.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_3515a4fd55e3e.gif"></figure>&nbsp;STEP 2 (SCREWED MORE INSTALLATION)-PIATTAFORMA-BIG VITE-TUBO BASE<figure class="image image_resized" style="width: 49.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_23c1d603412a6.gif"></figure>&nbsp;STEP 3<figure class="image image_resized" style="width: 62.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_5b40963220172.gif"></figure>  If you want to put up with my work and help me design more: https://www.paypal.me/carmelomontalto88&nbsp;This project gave me a lot of satisfaction. Available for any questions.Good Print from MC2 PROJECT 3D

Reattore Arc MK1 (LED Lamp Kit-001)

有趣的

Encrust3d

This is a slim poop bucket for the A1 printer that I made to fit perfectly between my new A1 printer and my Ikea pax cabinet. There isn't much room where I have my printer and I needed a poop bucket that was slimmer than any other online, so I made this in Fusion 360. This model is compatible with the top mount AMS lite hardware. If you would like an extended version of this, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/106061#profileId-113236" rel="nofollow noopener">https://makerworld.com/en/models/106061#profileId-113236</a>&nbsp;1/14/24: uploaded no logo version

海王星4

ender3

有趣的

A1配件